Mazak QUICK TURN SMART 350
This model was not found in Yamazaki Mazak's current lineup when we checked on 2026-10-02 (lineup page). It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
Max Spindle
Spindle Power
max swing
max machining length
bar capacity
chuck size
How much does the Mazak QUICK TURN SMART 350 cost?
Estimated price range
Our best estimate for a cnc lathes / turning center in this class — not a quote from Yamazaki Mazak. Configuration moves it a long way.
Overview
The Mazak QUICK TURN SMART 350 is listed as a turning center with a 10 in chuck on an A2-6 spindle nose, a maximum machining length of 1,020 mm (40.2 in) and a CNC-controlled programmable tailstock. Every figure here is a listed figure and should be confirmed against the machine or the quotation in front of you.
The name does not appear on Mazak's QUICK TURN model list. In the 350 size that list has the QUICK TURN 350 (Bolt-on), the QUICK TURN 350M (Milling, VDI), the QUICK TURN 350MY (Milling, Y-axis, VDI) and the QUICK TURN 350MSY (Milling, Y-axis, Second Spindle, VDI). The listed SMART 350 table has no milling, Y-axis or second-spindle row and a turret of 10 stations, which reads as a plain turning machine.
On those figures it is a shaft-capable lathe of moderate bore. Bar capacity is listed at 65 mm (2.56 in), and the 4,000 RPM spindle at 22 kW (30 hp) and 600 Nm (443 ft-lb), with no duty rating given for either. Rapid traverse is listed at 24 m/min (945 ipm) in X and 30 m/min (1,181 ipm) in Z. The machine is listed at 5,500 kg (12,125 lb) on 3,000 x 1,750 mm (118.1 x 68.9 in) of floor.
Two rows deserve a second look. The swing is listed as 420 mm (16.5 in), small for a machine with this length. The control is listed as MAZATROL SmoothAi CNC, whereas Mazak's series page describes the QUICK TURN series with MAZATROL SmoothG.
Full Specifications
| Parameter | Value |
|---|---|
| Max Swing | 420 mm (16.5 in) |
| Max Machining Length | 1,020 mm (40.2 in) |
| Bar Capacity | 65 mm (2.56 in) |
| Chuck Size | 10 in (A2-6 spindle nose) |
| Max Spindle Speed | 4,000 RPM |
| Spindle Motor Power | 22 kW (30 hp) |
| Spindle Torque | 600 Nm (443 ft-lb) |
| Turret Stations | 10 stations |
| Rapid Traverse X | 24 m/min (945 ipm) |
| Rapid Traverse Z | 30 m/min (1,181 ipm) |
| Tailstock | CNC-controlled programmable tailstock |
| Machine Weight | 5,500 kg (12,125 lb) |
| Floor Space | 3,000 x 1,750 mm (118.1 x 68.9 in) |
| CNC Control | MAZATROL SmoothAi CNC |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- Listed machining length of 1,020 mm (40.2 in) with a CNC-controlled programmable tailstock for shaft work
- Listed spindle torque of 600 Nm (443 ft-lb) with a 4,000 RPM maximum
- Rapid traverse listed at 30 m/min (1,181 ipm) in Z and 24 m/min (945 ipm) in X
- Listed floor space of 3,000 x 1,750 mm (118.1 x 68.9 in) at 5,500 kg (12,125 lb)
Limitations
- Not on Mazak's QUICK TURN model list, so there is no current model table to confirm the listed figures
- No milling, Y-axis or second-spindle row in the listed table; the turret is listed with 10 stations
- Spindle power of 22 kW (30 hp) and torque of 600 Nm (443 ft-lb) are listed without a duty rating
- The listed control, MAZATROL SmoothAi CNC, differs from the MAZATROL SmoothG that Mazak describes for the series
Best For
Frequently Asked Questions
01
No. The 350-size entries on Mazak's QUICK TURN model list are the QUICK TURN 350 (Bolt-on), QUICK TURN 350M (Milling, VDI), QUICK TURN 350MY (Milling, Y-axis, VDI) and QUICK TURN 350MSY (Milling, Y-axis, Second Spindle, VDI). Treat the SMART 350 table as listed figures and check them against the machine's own documents.
02
The listed table gives no milling spindle, Y-axis or second spindle. It lists a turret with 10 stations and a CNC-controlled programmable tailstock. If milling is required, the models Mazak lists with it in this size are the QUICK TURN 350M, 350MY and 350MSY.
03
A maximum of 4,000 RPM, 22 kW (30 hp) and 600 Nm (443 ft-lb) on an A2-6 spindle nose with a 10 in chuck. The table does not say whether the power and torque are continuous or short-time ratings, so ask for the rating before comparing them with another machine.
04
The table lists MAZATROL SmoothAi CNC. Mazak's series page describes the QUICK TURN series with MAZATROL SmoothG, on which G code programming is also available. Since the two do not agree, read the control name off the machine or the quotation.
More from Yamazaki Mazak
Other CNC Lathes / Turning Centers
You Ji VTL1200ATC
Tsugami M06SY-II
Okuma LU4000 EX
Accuway UT-600LX3
Johnford ST-70C
