ROMI D 800
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
spindle speed high speed version
How much does the ROMI D 800 cost?
Price estimate
We do not have a price for the ROMI D 800 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
With 800 mm (31.5 in) of X travel, the ROMI D 800 is the first D Series vertical machining center to get the full production specification: an arm-type tool changer, 40 m/min (1,575 ipm) rapids, the Fanuc 0i-MF Plus i-HMI control and a choice of two spindles. Y and Z are 610 mm (24 in) and 640 mm (25 in).
Spindle choice is the main decision. The 10,000 rpm version has a 25 hp / 18.5 kW motor and 118 Nm (87 lb-ft). The 15,000 rpm version has a 20 hp / 15 kW motor and 102 Nm (75.2 lb-ft), with headstock cooling as standard. Torque falls only modestly with the faster spindle, so shops that cut aluminium and steel on the same machine lose little by taking it. Romi recommends BBT holders above 10,000 rpm.
The changer holds 30 / 48 tools and swaps them in 3.2 / 3.3 s tool to tool. Tools can be 75 mm (3 in) in diameter, or 127 mm (5 in) when the adjacent stations are empty, and up to 300 mm (11.9 in) long. Each may weigh 7 kg (15 lbs).
One thing to check against your parts: the table is 914 x 560 mm (36 x 22 in), which is only a little longer than the X stroke and no bigger than the table of the D 600. Load is 900 kg (2,000 lbs). If the fixture plate is longer than the table, the D 1000 is the next step. Installed power is 35 kVA, or 40 kVA with the faster spindle, and the machine weighs 6,600 kg (14,500 lbs) / 6,950 kg (15,300 lbs).
Full Specifications
| Parameter | Value |
|---|---|
| Spindle Taper | ISO 40 |
| Max Spindle Speed | 10 to 10,000 rpm (10,000 rpm version) |
| Spindle Speed High Speed Version | 15 to 15,000 rpm (15,000 rpm version) |
| Spindle Torque | 118 Nm (87 lb-ft) with the 10,000 rpm headstock; 102 Nm (75.2 lb-ft) with the 15,000 rpm headstock |
| Rapid Traverse Xyz | 40 m/min (1,575 ipm) |
| Cutting Feed Rate | 20 m/min (787 ipm) |
| X Axis Travel | 800 mm (31.5 in) |
| Y Axis Travel | 610 mm (24 in) |
| Z Axis Travel | 640 mm (25 in) |
| Distance Spindle Nose to Table | 110 to 750 mm (4.3 to 30 in) |
| Table Size | 914 x 560 mm (36 x 22 in) |
| T-Slots | 5 slots, 18 x 89 mm (0.71 x 3.5 in) width x distance |
| Max Table Load | 900 kg (2,000 lbs) |
| Tool Changer Type | Automatic arm |
| Tool Capacity | 30 / 48 |
| Max Tool Diameter (full magazine) | 75 mm (3 in) |
| Max Tool Diameter (adjacent pockets empty) | 127 mm (5 in) |
| Max Tool Length | 300 mm (11.9 in) |
| Tool Holder Type | BT / CAT / DIN |
| Max Tool Weight | 7 kg (15 lbs) |
| Max Tool Weight on ATC | 150 kg (330 lbs) / 240 kg (530 lbs) |
| Tool Change Time | 3.2 / 3.3 s |
| CNC Control | Fanuc 0i-MF Plus i-HMI |
| Spindle Motor Power | 25 hp / 18.5 kW (10,000 rpm version); 20 hp / 15 kW (15,000 rpm version) |
| Power Requirement | 35 kVA (10,000 rpm version); 40 kVA (15,000 rpm version) |
| Machine Height | 3,140 mm (124 in) without mist exhausting system |
| Floor Space | 3,170 x 3,795 mm (125 x 150 in) without chip conveyor |
| Machine Weight | 6,600 kg (14,500 lbs) / 6,950 kg (15,300 lbs) |
Specifications sourced from romi.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Choice of a 10,000 rpm, 118 Nm (87 lb-ft) spindle or a 15,000 rpm, 102 Nm (75.2 lb-ft) spindle
- Automatic arm tool changer with 30 / 48 tools and a 3.2 / 3.3 s tool-to-tool time
- Rapids of 40 m/min (1,575 ipm) on linear roller guides in X, Y and Z
- Fanuc 0i-MF Plus i-HMI control with touchscreen
- Headstock cooling is standard with the 15,000 rpm version
Limitations
- The 914 x 560 mm (36 x 22 in) table is no larger than that of the D 600
- Table load is 900 kg (2,000 lbs); the D 1000 carries 1,100 kg (2,400 lbs)
- Tool diameter with a full magazine is 75 mm (3 in)
- The 15,000 rpm version raises installed power to 40 kVA
Best For
Frequently Asked Questions
01
The 10,000 rpm headstock gives 25 hp / 18.5 kW and 118 Nm (87 lb-ft). The 15,000 rpm headstock gives 20 hp / 15 kW and 102 Nm (75.2 lb-ft), includes headstock cooling and needs 40 kVA instead of 35 kVA. Romi recommends BBT holders for speeds over 10,000 rpm.
02
The automatic arm changer is offered with 30 / 48 tools. Maximum tool weight is 7 kg (15 lbs), and the magazine as a whole may carry 150 kg (330 lbs) / 240 kg (530 lbs). Tool change time is 3.2 / 3.3 s tool to tool.
03
X is 800 mm (31.5 in), Y is 610 mm (24 in) and Z is 640 mm (25 in). The table surface is 914 x 560 mm (36 x 22 in) with 5 T-slots and takes 900 kg (2,000 lbs). Spindle nose to table distance is 110 to 750 mm (4.3 to 30 in).
04
Romi lists the electrical installation for 400VCA/50-60Hz. Total installed power is 35 kVA for the 10,000 rpm version and 40 kVA for the 15,000 rpm version. Floor area is 3,170 x 3,795 mm (125 x 150 in) without a chip conveyor.
More from Romi
Other Vertical Machining Centers (VMC)
Hartford SW-626
Matsuura LF-160
Vision Wide MN-8032 / MN-8039
Brother TC-31A
Fryer MB-16R
