ROMI D 1000
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
spindle speed high speed version
How much does the ROMI D 1000 cost?
Price estimate
We do not have a price for the ROMI D 1000 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The ROMI D 1000 is the 40-inch member of the D Series: 1,020 mm (40 in) of X travel over a 1,220 x 560 mm (48 x 22 in) table. In the cross axes nothing changes from the smaller machines, with 610 mm (24 in) of Y and 640 mm (25 in) of Z, so the extra capacity is all in length.
That length is useful in two ways. A long part, a rail or a plate, fits in one setup. Or the table takes a row of vises, and here a table longer than the stroke helps, because clamps and stops can sit outside the cutting zone. The table carries 1,100 kg (2,400 lbs), against 900 kg (2,000 lbs) on the D 800.
Spindle, changer and control are the series standard. The ISO 40 headstock comes as a 10 to 10,000 rpm version with 25 hp / 18.5 kW or as a 15 to 15,000 rpm version with 20 hp / 15 kW. The arm changer stores 30 / 48 tools. Axes rapid at 40 m/min (1,575 ipm), and the CNC is the Fanuc 0i-MF Plus i-HMI. Thermal compensation is part of the standard equipment, which matters more as the X axis gets longer.
The frame grows less than the stroke. Floor area is 3,390 x 3,795 mm (133 x 150 in) and net weight 6,900 kg (15,200 lbs) / 7,250 kg (15,980 lbs), against 6,600 kg (14,500 lbs) / 6,950 kg (15,300 lbs) for the D 800. Height stays at 3,140 mm (124 in) without the mist exhausting system.
Full Specifications
| Parameter | Value |
|---|---|
| Spindle Taper | ISO 40 |
| Max Spindle Speed | 10 to 10,000 rpm (10,000 rpm version) |
| Spindle Speed High Speed Version | 15 to 15,000 rpm (15,000 rpm version) |
| Spindle Torque | 118 Nm (87 lb-ft) with the 10,000 rpm headstock; 102 Nm (75.2 lb-ft) with the 15,000 rpm headstock |
| Rapid Traverse Xyz | 40 m/min (1,575 ipm) |
| Cutting Feed Rate | 20 m/min (787 ipm) |
| X Axis Travel | 1,020 mm (40 in) |
| Y Axis Travel | 610 mm (24 in) |
| Z Axis Travel | 640 mm (25 in) |
| Distance Spindle Nose to Table | 110 to 750 mm (4.3 to 30 in) |
| Table Size | 1,220 x 560 mm (48 x 22 in) |
| T-Slots | 5 slots, 18 x 89 mm (0.71 x 3.5 in) width x distance |
| Max Table Load | 1,100 kg (2,400 lbs) |
| Tool Changer Type | Automatic arm |
| Tool Capacity | 30 / 48 |
| Max Tool Diameter (full magazine) | 75 mm (3 in) |
| Max Tool Diameter (adjacent pockets empty) | 127 mm (5 in) |
| Max Tool Length | 300 mm (11.9 in) |
| Tool Holder Type | BT / CAT / DIN |
| Max Tool Weight | 7 kg (15 lbs) |
| Max Tool Weight on ATC | 150 kg (330 lbs) / 240 kg (530 lbs) |
| Tool Change Time | 3.2 / 3.3 s |
| CNC Control | Fanuc 0i-MF Plus i-HMI |
| Spindle Motor Power | 25 hp / 18.5 kW (10,000 rpm version); 20 hp / 15 kW (15,000 rpm version) |
| Power Requirement | 35 kVA (10,000 rpm version); 40 kVA (15,000 rpm version) |
| Machine Height | 3,140 mm (124 in) without mist exhausting system |
| Floor Space | 3,390 x 3,795 mm (133 x 150 in) without chip conveyor |
| Machine Weight | 6,900 kg (15,200 lbs) / 7,250 kg (15,980 lbs) |
Specifications sourced from romi.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 1,020 mm (40 in) of X travel under a 1,220 x 560 mm (48 x 22 in) table
- Table load of 1,100 kg (2,400 lbs), uniformly distributed
- Same 40 m/min (1,575 ipm) rapids as the shorter D 800
- Thermal compensation and linear roller guides are standard
- 30 / 48 tool arm changer with tools up to 300 mm (11.9 in) long
Limitations
- Y travel stays at 610 mm (24 in) and the table is 560 mm deep, so wide plates do not fit
- Z travel is 640 mm (25 in) with at most 750 mm (30 in) from spindle nose to table
- Maximum tool weight is 7 kg (15 lbs)
- Spindle torque is 118 Nm (87 lb-ft) at best; the catalogue lists no geared headstock
Best For
Frequently Asked Questions
01
X travel is 1,020 mm (40 in). Y travel is 610 mm (24 in) and Z travel is 640 mm (25 in). The table surface measures 1,220 x 560 mm (48 x 22 in), with 5 T-slots of 18 x 89 mm (0.71 x 3.5 in) width x distance.
02
The D 1250 extends X travel to 1,270 mm (50 in), on a 1,320 x 560 mm (52 x 22 in) table that carries 1,400 kg (3,000 lbs). The D 1000 has 1,020 mm (40 in) of X and carries 1,100 kg (2,400 lbs). Spindles, tool changer, Y and Z travels are the same.
03
Two ISO 40 headstocks. One runs from 10 to 10,000 rpm with a 25 hp / 18.5 kW motor and 118 Nm (87 lb-ft). The other runs from 15 to 15,000 rpm with a 20 hp / 15 kW motor, 102 Nm (75.2 lb-ft) and a cooled cartridge as standard.
04
The area, front x side, is 3,390 x 3,795 mm (133 x 150 in) without a chip conveyor, and the height is 3,140 mm (124 in) without the optional mist exhausting system. Machine net weight is 6,900 kg (15,200 lbs) / 7,250 kg (15,980 lbs).
More from Romi
Other Vertical Machining Centers (VMC)
Mazak FJV-60/80
Hartford SW-435
Vision Wide MN-6026 / MN-6033
Brother SPEEDIO S500X1N
Fryer MB-10R
