ROMI D 600
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
spindle torque
How much does the ROMI D 600 cost?
Price estimate
We do not have a price for the ROMI D 600 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The ROMI D 600 is the base model of Romi’s D Series vertical machining centers: an ISO 40 machine with 600 mm (23.6 in) of X travel, 610 mm (24 in) of Y and 640 mm (25 in) of Z. It differs from the three larger models in more than travel. It has a 20-tool carousel where they have an arm-type changer, a simpler control, and no high-speed spindle option.
The spindle runs from 10 to 10,000 rpm on a 25 hp / 18.5 kW motor coupled directly to the cartridge, with 118 Nm (87 lb-ft) of maximum torque. That is the same 10,000 rpm headstock as the rest of the series. Rapid traverse is 30 m/min (1,181 ipm) on linear roller guides, and cutting feed can be programmed up to 20 m/min (787 ipm).
The table is worth a second look. Its surface is 914 x 560 mm (36 x 22 in), the same table the D 800 carries, so it overhangs the 600 mm X stroke and gives room for a vise and a rotary table side by side. Load capacity is 900 kg (2,000 lbs).
A carousel changer is slower than an arm: tool-to-tool time is 4.0 s. In exchange the carousel accepts tools up to 100 mm (3.9 in) in diameter without emptying neighbouring pockets, more than the 75 mm (3 in) of the D 800’s arm changer, though length is limited to 254 mm (10 in). The CNC is a Fanuc 0i-MF Plus without the i-HMI touchscreen of the larger models. At 2,495 x 2,425 mm (98 x 95 in) and 6,000 kg (13,200 lbs), with a single sliding door, it is the one D Series machine that fits a tight cell.
Full Specifications
| Parameter | Value |
|---|---|
| Spindle Taper | ISO 40 |
| Max Spindle Speed | 10 to 10,000 rpm |
| Spindle Torque | 118 Nm (87 lb-ft) |
| Rapid Traverse Xyz | 30 m/min (1,181 ipm) |
| Cutting Feed Rate | 20 m/min (787 ipm) |
| X Axis Travel | 600 mm (23.6 in) |
| Y Axis Travel | 610 mm (24 in) |
| Z Axis Travel | 640 mm (25 in) |
| Distance Spindle Nose to Table | 110 to 750 mm (4.3 to 30 in) |
| Table Size | 914 x 560 mm (36 x 22 in) |
| T-Slots | 5 slots, 18 x 89 mm (0.71 x 3.5 in) width x distance |
| Max Table Load | 900 kg (2,000 lbs) |
| Tool Changer Type | Carousel |
| Tool Capacity | 20 |
| Max Tool Diameter (full magazine) | 100 mm (3.9 in) |
| Max Tool Diameter (adjacent pockets empty) | 200 mm (7.9 in) |
| Max Tool Length | 254 mm (10 in) |
| Tool Holder Type | BT / CAT / DIN |
| Max Tool Weight | 6 kg (13 lbs) |
| Max Tool Weight on ATC | 68 kg (150 lbs) |
| Tool Change Time | 4.0 s |
| CNC Control | Fanuc 0i-MF Plus |
| Spindle Motor Power | 25 hp / 18.5 kW |
| Power Requirement | 30 kVA |
| Machine Height | 3,140 mm (124 in) without mist exhausting system |
| Floor Space | 2,495 x 2,425 mm (98 x 95 in) without chip conveyor |
| Machine Weight | 6,000 kg (13,200 lbs) |
Specifications sourced from romi.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Table of 914 x 560 mm (36 x 22 in), larger than the 600 mm (23.6 in) X travel, with 900 kg (2,000 lbs) of load capacity
- 10,000 rpm ISO 40 spindle with 25 hp / 18.5 kW and 118 Nm (87 lb-ft)
- Carousel takes 100 mm (3.9 in) tools in adjacent pockets and 200 mm (7.9 in) with neighbours empty
- Smallest footprint in the series at 2,495 x 2,425 mm (98 x 95 in)
- Y travel of 610 mm (24 in) and Z travel of 640 mm (25 in), the same as on the larger models
Limitations
- Only 20 tools, and a 4.0 s tool-to-tool change
- No 15,000 rpm version; that headstock is offered from the D 800 upward
- Rapid traverse is 30 m/min (1,181 ipm), against 40 m/min (1,575 ipm) on the D 800
- Fanuc 0i-MF Plus control without the i-HMI touchscreen
Best For
Frequently Asked Questions
01
Beyond the shorter X travel, the D 600 has a 20-tool carousel, 30 m/min (1,181 ipm) rapids and a Fanuc 0i-MF Plus control. The D 800 has an automatic arm changer with 30 / 48 tools, 40 m/min (1,575 ipm) rapids and the i-HMI version of the control. Both share the 914 x 560 mm (36 x 22 in) table.
02
An ISO 40 spindle with a BT / BBT interface, running from 10 to 10,000 rpm. The main motor is rated 25 hp / 18.5 kW and maximum torque is 118 Nm (87 lb-ft). Romi offers no 15,000 rpm headstock on this model.
03
Up to 100 mm (3.9 in) in diameter with all 20 pockets in use, or 200 mm (7.9 in) with the adjacent stations empty. Maximum length is 254 mm (10 in) and maximum weight 6 kg (13 lbs) per tool, with 68 kg (150 lbs) allowed on the changer in total.
04
The table takes 900 kg (2,000 lbs), uniformly distributed, on a 914 x 560 mm (36 x 22 in) surface with 5 T-slots. The distance from spindle nose to table runs from 110 to 750 mm (4.3 to 30 in), which sets the tallest fixture and part stack.
More from Romi
Other Vertical Machining Centers (VMC)
Hartford SW-623
Vision Wide MN-8026 / MN-8033
Mazak VC-500A/2PC
Brother TC-22A
Fryer MB-16Q
