Onsrud 228GW10 5-Axis
Key Specifications
Max Spindle
Tool Capacity
Spindle Power
table size x
table size y
machine length
How much does the Onsrud 228GW10 5-Axis cost?
Price estimate
We do not have a price for the Onsrud 228GW10 5-Axis that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Onsrud 228GW10 5-Axis is listed with both of the deep strokes in Onsrud's G-Series 5-Axis table, 28 in (711 mm) and 40 in (1,016 mm), on a table 228 in (5,792 mm) long and 120 in (3,048 mm) wide. It is the smallest ten-foot-wide machine offered with either.
The table does not change with the stroke, which is not true of the eight-foot-wide models. What changes is height: 155 in (3,937 mm) with 28 in of Z and 167 in (4,242 mm) with 40 in. Length is 323 in (8,205 mm) and width 200 in (5,080 mm) in both versions.
So the choice between the strokes comes down to the part and the roof. Forty inches of Z, with a 5-axis head, takes on deep female moulds, tall plugs and parts stood on edge. It also means a long Z-axis working at full reach. If the parts do not need it, the 28 in version is the lower machine.
Nineteen feet by ten is a general-purpose size for marine and aerospace tooling. Five vacuum zones are standard, and the spindle is 18 hp (13.4 kW) at 24,000 rpm with 12 tools. Onsrud names a FANUC interface as standard. For tooling work, its recommended laser compensation and linear scales belong in the specification.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size X | 228 in (5,792 mm) |
| Table Size Y | 120 in (3,048 mm) |
| Machine Length | 323 in (8,205 mm) |
| Machine Width | 200 in (5,080 mm) |
| Machine Height | 155 in (3,937 mm) with 28 in Z; 167 in (4,242 mm) with 40 in Z |
| Vacuum Zones Standard | 5 |
| Spindle Motor Power | 18 hp (13.4 kW) |
| Max Spindle Speed | 24,000 rpm |
| Tool Capacity | 12 (larger capacity tool changers optional) |
| Z Stroke | 28 in (711 mm); 40 in (1,016 mm) |
| Spindle Power Optional | 33 hp (24.6 kW) |
| Dual Gantry | Optional |
| Second Tool Changer | Optional |
Specifications sourced from cronsrud.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 28 in (711 mm) or 40 in (1,016 mm) Z-stroke on the same 228 in (5,792 mm) by 120 in (3,048 mm) table
- Smallest ten-foot-wide machine with the deep strokes
- Same 323 in (8,205 mm) length and 200 in (5,080 mm) width for both versions
- Laser compensation and linear scales available for tooling accuracy
Limitations
- Machine height of 167 in (4,242 mm) with the 40 in stroke
- 5 vacuum zones only, on a table 120 in (3,048 mm) wide
- Frame width of 200 in (5,080 mm)
Best For
Frequently Asked Questions
01
28 in (711 mm) and 40 in (1,016 mm). The table is 228 in (5,792 mm) by 120 in (3,048 mm) for both. Machine height is 155 in (3,937 mm) for the first and 167 in (4,242 mm) for the second.
02
323 in (8,205 mm) long and 200 in (5,080 mm) wide in both versions. Height is 155 in (3,937 mm) or 167 in (4,242 mm), depending on the stroke. The table has 5 vacuum zones as standard.
03
Start from the tallest part and the longest tool. If they fit under 28 in with the head tilted, the lower machine is easier to house. Choose 40 in for deep moulds and tall plugs, and check the building against 167 in (4,242 mm).
04
The 216GW8 5-Axis is narrower and slightly shorter in table, 216 in (5,487 mm) by 96 in (2,439 mm), and is listed with the 28 in stroke only. The two frames have the same length.
