Onsrud 468GW10
Key Specifications
Max Spindle
Tool Capacity
Spindle Power
table size x
table size y
machine length
How much does the Onsrud 468GW10 cost?
Price estimate
We do not have a price for the Onsrud 468GW10 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Onsrud 468GW10 is the 18 in (457 mm) Z-stroke member of the long ten-foot-wide G-Series. It exists as its own code because the table changes with the stroke: 468 in (11,888 mm) in X here, a foot less than the 480GW10, on the same 120 in (3,048 mm) of Y.
A foot of table is a small price on a thirty-nine-foot bed. The more useful comparison is height. This machine stands 140 in (3,556 mm). The 480GW10 is 103 in (2,617 mm) with its 11 in stroke and 167 in (4,242 mm) with 28 in, so the 468GW10 sits between them and may be the tallest version a given building accepts.
Eighteen inches of Z on a 3-axis router is for thick stock and fixtures. It clears stacked sheet, thick plastic blocks and deep vacuum fixtures, and it leaves room for long tools under the spindle. It is not a mould-making stroke. The frame is 586 in (14,885 mm) long and 200 in (5,080 mm) wide.
Onsrud lists 10 vacuum zones for this model, one fewer than the 480GW10. Spindle power is 18 hp (13.4 kW) at 24,000 rpm, with 12 tools. A dual gantry, up to 4 spindles and a second tool changer are the listed upgrades.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size X | 468 in (11,888 mm) |
| Table Size Y | 120 in (3,048 mm) |
| Machine Length | 586 in (14,885 mm) |
| Machine Width | 200 in (5,080 mm) |
| Machine Height | 140 in (3,556 mm) |
| Vacuum Zones Standard | 10 |
| Spindle Motor Power | 18 hp (13.4 kW) |
| Max Spindle Speed | 24,000 rpm |
| Tool Capacity | 12 (larger capacity tool changers optional) |
| Z Stroke | 18 in (457 mm) |
| Spindle Power Optional | 24 hp (17.9 kW) |
| Spindles Optional | Up to 4 |
| Dual Gantry | Optional |
| Second Tool Changer | Optional |
Specifications sourced from cronsrud.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 18 in (457 mm) Z-stroke on a 468 in (11,888 mm) by 120 in (3,048 mm) table
- Machine height of 140 in (3,556 mm), lower than the 480GW10 with its 28 in stroke
- 10 vacuum zones as standard
- Dual gantry and second tool changer on the upgrade list
Limitations
- Table X is 468 in (11,888 mm), a foot shorter than the 480GW10
- Machine length of 586 in (14,885 mm)
- Listed with one Z-stroke only
Best For
Frequently Asked Questions
01
Onsrud's table gives each Z-stroke block its own model codes. In the 18 in block the long ten-foot-wide machine has a 468 in (11,888 mm) table and is called 468GW10. In the 11 in, 28 in and 40 in blocks the table is 480 in (12,192 mm) and the code is 480GW10.
02
Table: 468 in (11,888 mm) by 120 in (3,048 mm). Machine: 586 in (14,885 mm) long, 200 in (5,080 mm) wide and 140 in (3,556 mm) high. Onsrud lists 10 vacuum zones as standard.
03
It gives clearance for thicker material, stacked sheets, tall fixtures and long tools. The 468GW10 pairs that stroke with a 468 in (11,888 mm) table, so long, thick blanks can be machined in one setup.
04
The G-Series standard: 18 hp (13.4 kW) and 24,000 rpm, with a 12-tool capacity. A 24 hp (17.9 kW) spindle is optional, and so are additional spindles, up to 4 in total.
