Nexturn SA45XIII

Q: How much does the Nexturn SA45XIII cost?

The price estimate for the Nexturn SA45XIII is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/nexturn-sa45xiii#price; the request is passed to Nexturn or an authorised dealer.

Specs verified 2026-10-05 · nexturn.co.kr Updated 2026-10-05

Key Specifications

Max Spindle

6,000 rpm

Rapid Traverse

32 m/min

Spindle Power

11 / 15 kW (14.8 / 20.1 hp)

Max Turn Length

120 mm (4.7 in)

bar capacity

45 mm (1.8 in)

main spindle drilling tapping

16 mm (0.6 in) / M12

How much does the Nexturn SA45XIII cost?

Price estimate

Uncertain

We do not have a price for the Nexturn SA45XIII that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

The Nexturn SA45XIII is the heavy member of the three-path X-III type: 45 mm (1.8 in) bar, an 11 / 15 kW (14.8 / 20.1 hp) main spindle and a turning length of 120 mm (4.7 in). It runs eleven axes on a FANUC 31i-B and both spindles are limited to 6,000 rpm.

Its tooling is laid out differently from the SA32XIII and SA38XIII, and the table shows where. Channel 1 has two OD tools and four cross live tools. Channel 2 has three OD tools, no cross tools at all, and seven ID tools, four fixed and three live. With the cross column of channel 2 empty, simultaneous cross machining from both slides is not what this model is for. Its second slide is there for turning and for work on the bar's end face. Eight back-end tools serve the sub spindle and no front-end face tools are listed.

The frame is scaled up to suit. Shanks are □20 × 125 mm (0.8 × 4.9 in) on both channels, on-centre drilling goes to 16 mm (0.6 in) and M12, and cross and back-end drilling to 13 mm (0.5 in) and M10. Nexturn fits a hydraulic brake unit in place of the pneumatic one used on the SA32XIII and SA38XIII. The sub spindle is 2.2 / 5.5 kW (3.0 / 7.4 hp).

Two figures deserve a second look before ordering. The largest cross disc mill is 40 mm (1.6 in), smaller than the bar, so a slot cannot be milled across the full diameter in one pass. And power consumption is 30 kVA, half as much again as the 20 kVA of the SA38XIII. The machine weighs 4,000 kg (8,818 lb) and holds 300 L of coolant.

Full Specifications

Parameter	Value
Bar Capacity	45 mm (1.8 in)
Max Turning Length	120 mm (4.7 in)
Main Spindle Drilling Tapping	16 mm (0.6 in) / M12
Sub Spindle Chucking Diameter	45 mm (1.8 in)
Back End Face Drilling Tapping	13 mm (0.5 in) / M10
Cross Disc Mill Diameter	40 mm (1.6 in)
Max Spindle Speed	6,000 rpm
Sub Spindle Speed	6,000 rpm
Channel 1 OD Cross Live Tools	2 / 4
Channel 1 Cross Spindle Speed	6,000 rpm
Channel 1 Drilling Tapping	13 mm (0.5 in) / M10
Channel 1 Tool Shank	□20 × 125 mm (0.8 × 4.9 in)
Channel 2 OD Cross Live ID Tools	3 / - / 7 (Fix:4 / Live:3)
Channel 2 Cross Spindle Speed	6,000 rpm
Channel 2 Drilling Tapping	13 mm (0.5 in) / M10
Channel 2 Tool Shank	□20 × 125 mm (0.8 × 4.9 in)
Back End Face Tools	8 (Fix:4 / Live:4)
Rapid Traverse Rate	32 m/min
Main Spindle Positioning	Cs + 1/1,000°
Sub Spindle Positioning	Cs + 1/1,000°
Spindle Motor Power	11 / 15 kW (14.8 / 20.1 hp)
Sub Spindle Power	2.2 / 5.5 kW (3.0 / 7.4 hp)
Cross Back Tool Motor	1.0 kW (1.3 hp)
Servo Motor	1.0 kW (1.3 hp)
Coolant Pump Motor	0.9 kW (1.2 hp)
Lubrication Pump Motor	0.04 kW (0.05 hp)
Coolant Tank	300 L
Lubrication Tank	2 L
Power Requirement	30 kVA
Center Height	1,100 mm (43.3 in)
Machine Dimensions	2,600 × 1,450 × 1,950 mm (102.4 × 57.1 × 76.8 in)
Machine Weight	4,000 kg (8,818 lb)
CNC Control	FANUC 31i-B
Controlled Axes	11
Axis Designation	X1, Z1, Y1, X2, Z2, Y2, X3, Z3, Y3, C1, C3
Min Input Increment	0.001 mm
Cutting Feed Rate	1~6,000 mm/min
Tool Offsets	128 sets
Program Memory	512 Kbyte
Registerable Programs	500 sets

Specifications sourced from nexturn.co.kr — verified 2026-10-05

Strengths & Limitations

Strengths

11 / 15 kW (14.8 / 20.1 hp) main spindle with three-path control
32 m/min rapid traverse, where the two-path SA45XII is listed at 24 m/min
Seven ID tool positions on channel 2, three of them live
Hydraulic brake unit as standard
□20 × 125 mm (0.8 × 4.9 in) tool shanks on both gang slides

Limitations

Turning length is 120 mm (4.7 in), against 270 mm (10.6 in) on the SA38XIII
Channel 2 has no cross tools, so only four cross live tools are available at the main spindle
Cross disc mill is limited to 40 mm (1.6 in), less than the 45 mm bar
Needs a 30 kVA supply, against 20 kVA for the SA38XIII
No front-end face tools are listed for the sub spindle

Best For

Short parts from bar up to 45 mm (1.8 in) with heavy turning on two slides Parts with several bores or internal features cut from the end face Volume production of fittings and bodies within 120 mm (4.7 in) of length Work needing on-centre holes up to 16 mm (0.6 in)

Frequently Asked Questions

01 How is the SA45XIII tooled compared with the SA38XIII?

The SA38XIII has five OD and four cross tools on channel 1 and two OD, four modular cross and four ID tools on channel 2. The SA45XIII has two OD and four cross tools on channel 1, and three OD and seven ID tools on channel 2 with no cross tools. The SA45XIII also drops the front-end face tools.

02 What is the difference between the SA45XIII and the SA45XII?

Both take 45 mm (1.8 in) bar, turn 120 mm (4.7 in) and have an 11 / 15 kW (14.8 / 20.1 hp) main spindle at 6,000 rpm. The SA45XIII has three paths, eleven axes, a FANUC 31i-B and 32 m/min rapids. The SA45XII has two paths, eight axes, a FANUC 0iTF, 24 tools and 24 m/min rapids.

03 How much power does the SA45XIII draw?

Power consumption is listed at 30 kVA. The spindle motors are 11 / 15 kW (14.8 / 20.1 hp) main and 2.2 / 5.5 kW (3.0 / 7.4 hp) sub, the cross and back tools unit and the servo motors are 1.0 kW (1.3 hp), and the coolant pump is 0.9 kW (1.2 hp).

04 How big and heavy is the SA45XIII?

2,600 × 1,450 × 1,950 mm (102.4 × 57.1 × 76.8 in) and 4,000 kg (8,818 lb). Spindle centre height is 1,100 mm (43.3 in). The coolant tank holds 300 L and the lubrication tank 2 L.