MCM TANK 1900 EVO
Key Specifications
Spindle Taper
Tool Capacity
axes configuration
process technology
x axis travel
y axis travel
How much does the MCM TANK 1900 EVO cost?
Price estimate
We do not have a price for the MCM TANK 1900 EVO that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The MCM TANK 1900 EVO is the largest machining center in the TANK EVO line: a horizontal machine with 1,900 mm (74.8 in) of X, 1,400 mm (55.1 in) of Y and 1,960 mm (77.2 in) of Z. Those three figures are identical in the 4-Axes, 5-Axes and 5-Axes Multitasking columns.
That uniformity is the practical difference from the TANK 1600 EVO, where the 4-Axes machine stops at 1,500 mm (59.1 in) of Z and the longer strokes belong to the 5-axis versions. Here a plain 4-axis buyer gets the full 1,960 mm, close to the X stroke itself, which suits long parts set along the spindle axis and deep bores reached with extended tooling.
Pallets are sized to match. The milling versions take 1,000 x 1,000 mm (39.3 x 39.3 in) or 1,250 x 1,250 mm (49.2 x 49.2 in). The Multitasking version takes Ø 1,250 mm (Ø 49.2 in) or Ø 1,400 mm (Ø 55.1 in) and is listed with a table speed of 500 min-1, against 20 / 40 min-1 on the milling tables. A round pallet of that diameter at that speed is turning-lathe territory, so check clamping and balance limits with MCM for the parts you have in mind.
Five-axis versions use the TANK tilting head, 175 degrees (+80/-95). Rapid feed is 50 m/min (1,968.5 ipm). Tapers are HSK, ISO or CAPTO, with a magazine of "up to 80 (999)" tools as printed.
Full Specifications
| Parameter | Value |
|---|---|
| Axes Configuration | 4-Axes / 5-Axes / 5-Axes Multitasking |
| Process Technology | 4-Axes, 5-Axes: Milling; 5-Axes Multitasking: Milling, Turning, Grinding |
| X Axis Travel | 1,900 mm (74.8 in) |
| Y Axis Travel | 1,400 mm (55.1 in) |
| Z Axis Travel | 1,960 mm (77.2 in) |
| Rapid Traverse Xyz | 50 m/min (1,968.5 ipm) |
| Pallet Size | 4-Axes, 5-Axes: 1,000 x 1,000 mm (39.3 x 39.3 in); 5-Axes Multitasking: Ø 1,250 mm (Ø 49.2 in) |
| Pallet Size Option 2 | 4-Axes, 5-Axes: 1,250 x 1,250 mm (49.2 x 49.2 in); 5-Axes Multitasking: Ø 1,400 mm (Ø 55.1 in) |
| B Axis Max Rotation Speed | 4-Axes, 5-Axes: 20 / 40 min-1; 5-Axes Multitasking: 500 min-1 |
| Fifth Axis Type | 5-Axes, 5-Axes Multitasking: Tilting Head |
| Tilting Angle | 5-Axes, 5-Axes Multitasking: 175 (+80/-95) degrees |
| Spindle Taper | HSK / ISO / CAPTO |
| Tool Capacity | up to 80 (999) |
| Available Configurations | Single-Pallet / Twin-Pallet / Multipallet / FMS |
Specifications sourced from mcm-group.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 1,960 mm (77.2 in) of Z travel in every configuration, including the 4-Axes machine
- Largest pallets of the TANK EVO line: up to 1,250 x 1,250 mm (49.2 x 49.2 in) square or Ø 1,400 mm (Ø 55.1 in) round
- Multitasking table speed of 500 min-1 for turning and grinding
- Tilting head with 175 degrees of travel (+80/-95) on the 5-axis versions
- Same 50 m/min (1,968.5 ipm) rapid feed as the smaller TANK 1300 EVO
Limitations
- Y travel is 1,400 mm (55.1 in), no more than the 4-Axes TANK 1600 EVO, so the machine grows in length and depth but not in height
- The smallest pallet is 1,000 x 1,000 mm (39.3 x 39.3 in), which is a lot of pallet for small parts
- Pallet load is not published, which matters most on a machine of this size
- Spindle power, torque and machine weight have to be requested
Best For
Frequently Asked Questions
01
X is 1,900 mm (74.8 in), Y is 1,400 mm (55.1 in) and Z is 1,960 mm (77.2 in). MCM prints the same three figures for the 4-Axes, 5-Axes and 5-Axes Multitasking configurations. Rapid feed on all three axes is 50 m/min (1,968.5 ipm).
02
On the milling versions, 1,250 x 1,250 mm (49.2 x 49.2 in), listed as the second option after 1,000 x 1,000 mm (39.3 x 39.3 in). On the Multitasking version, a round Ø 1,400 mm (Ø 55.1 in) pallet, after Ø 1,250 mm (Ø 49.2 in). The table gives no load rating for any of them.
03
In the 5-Axes Multitasking configuration, yes: MCM lists milling, turning and grinding, with a maximum B-axis rotation speed of 500 min-1. The 4-Axes and 5-Axes configurations are for milling and their table speed row reads 20 / 40 min-1.
04
MCM's next step is the TANK.G line. The TANK.G 2000 has 2,000 mm (78.7 in) of X and Z, and its 4-Axes version has 2,000 mm (78.7 in) of Y where this machine has 1,400 mm (55.1 in). The TANK.G 2000 is slower in rapid feed, at 45 m/min (1,771.7 ipm).
More from MCM
Other Horizontal Machining Centers (HMC)
Okuma MS-320H
Niigata HN1000-S BAR
SW BA W06-12
Matsuura H.Plus-405
HNK HTC-1600
