Matec FUV720
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Rapid Traverse
x axis travel
How much does the Matec FUV720 cost?
Price estimate
We do not have a price for the Matec FUV720 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
At 10,320 kg (22,751 lb), the Matec FUV720 is the larger and heavier of MATEC's two swivel-table 5-axis universal machining centres. It moves 720 mm (28.3 in) in X, 600 mm (23.6 in) in Y and 520 mm (20.5 in) in Z over a rotary table with a Ø 720 mm (Ø 28.3 in) clamping surface. MATEC's text describes the face plate as Ø 720 x 540 mm, which suggests a round plate with flats rather than a full circle.
The spindle is where the table sets this model apart from the FUV620. Its column shows a single speed, 18,000 rpm, with HSK63 or SK40 tooling, while the FUV620 column shows 12,000 and 15,000 rpm. The equipment sheet for the series also names optional spindles up to 24,000 rpm with HSK63. Which of these is the base machine today is worth confirming, because the sheet and the table do not line up exactly.
Kinematics are shared with the smaller machine: the table swivels from -50° to +110° in B and turns 360° in C, the rotary axes are clamped hydraulically for 5-sided work, and all axes carry direct measuring systems as standard. Rapid traverse is 48 m/min (1,890 ipm). The spindle nose sits between 150 and 670 mm (5.9 and 26.4 in) from the table, a wider span than the 200 to 660 mm of the FUV620.
The magazine holds 48 tools, optionally 60 or 120, each up to 250 mm (9.8 in) long and 7 kg (15 lb). The footprint is 4,300 x 4,250 mm with a height of 3,060 mm (120.5 in), and the enclosure is listed without a roof. Control is the HEIDENHAIN TNC 640 HSCI as standard or SIEMENS ONE as an option.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 720 mm (28.3 in) |
| Y Axis Travel | 600 mm (23.6 in) |
| Z Axis Travel | 520 mm (20.5 in) |
| C Axis Range | 360° |
| B Axis Range | -50° | +110° |
| Distance Spindle Nose | 150 – 670 mm (5.9 – 26.4 in) |
| Spindle Taper | HSK63 | SK40 |
| Max Spindle Speed | 18,000 rpm |
| Tool Capacity | 48 (60 | 120) |
| Max Tool Length | 250 mm (9.8 in) |
| Max Tool Diameter (full magazine) | 75 | 127 mm (3.0 | 5.0 in) |
| Max Tool Weight | 7 kg (15 lb) |
| Rapid Traverse Rate | 48 m/min (1,890 ipm) |
| Table Size | Ø 720 mm (Ø 28.3 in) (clamping surface) |
| T-Slots | 5 x 14 H7 x 100 mm |
| Machine Length | 4,300 mm (169.3 in) |
| Machine Width | 4,250 mm (167.3 in) |
| Machine Height | 3,060 mm (120.5 in) |
| Machine Weight | 10,320 kg (22,751 lb) |
| CNC Control | HEIDENHAIN TNC 640 HSCI (standard); SIEMENS ONE (option) |
Specifications sourced from matec.de — verified 2026-10-04
Strengths & Limitations
Strengths
- 18,000 rpm spindle listed for this model, with HSK63 or SK40 tooling
- 720 x 600 x 520 mm (28.3 x 23.6 x 20.5 in) of travel over a Ø 720 mm (Ø 28.3 in) table
- Spindle nose to table distance of 150 to 670 mm (5.9 to 26.4 in) leaves room for tall fixtures
- Direct encoders on the rotary axes and glass scales on the linear axes as standard equipment
- Magazine can be extended from 48 to 60 or 120 pockets and is fed from outside the work area
Limitations
- The table load is not stated consistently on MATEC's page and needs to be confirmed
- Weighs 10,320 kg (22,751 lb) on a 4,300 x 4,250 mm footprint, more than the FUV620 at 8,500 kg
- Tool weight is limited to 7 kg (15 lb) and tool length to 250 mm (9.8 in)
- Kinematic Opt, touch probe, laser tool measurement and through-tool coolant are listed as options, not standard equipment
Best For
Frequently Asked Questions
01
MATEC's technical data table lists 18,000 rpm with HSK63 or SK40 tooling in the FUV720 column. The equipment sheet for the series lists optional spindles up to 15,000, 18,000 and 24,000 rpm with HSK63. The table's power row prints two figures per spindle without saying what each one is, so ask MATEC for the rated power and torque.
02
Travels are 720 x 600 x 520 mm (28.3 x 23.6 x 20.5 in) and the clamping surface is Ø 720 mm (Ø 28.3 in). The distance from spindle nose to table runs from 150 to 670 mm (5.9 to 26.4 in). The table swivels from -50° to +110°, so check the swing of the part and fixture at the tilt angles you need.
03
The FUV620 has 620 x 520 x 460 mm of travel, a Ø 650 mm table and weighs 8,500 kg; the FUV720 has 720 x 600 x 520 mm, a Ø 720 mm table and weighs 10,320 kg. Both rapid at 48 m/min, share the 48-tool magazine and swivel -50° to +110° in B. The FUV720 column lists 18,000 rpm where the FUV620 column lists 12,000 and 15,000 rpm.
04
The list covers the HEIDENHAIN TNC 640 HSCI control with an HR 510 handwheel, roller linear guides in all axes, glass scales and direct encoders, temperature compensation, a scraper-type chip conveyor, an external coolant system and a full work area enclosure without roof. SIEMENS ONE, through-tool coolant at 30 or 70 bar and a 60 or 120 pocket magazine are options.
More from Matec
Other 5-Axis Machining Centers
Fanuc Robodrill α-D21LiA5
Milltronics VM250IL-5X
Anderson FUV-500
Feeler U-250
Hartford HSA-427EA
