Johnford DMC-1600H
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
distance between columns
x axis travel
How much does the Johnford DMC-1600H cost?
Price estimate
We do not have a price for the Johnford DMC-1600H that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Johnford DMC-1600H is a 20,400 kg (45,000 lb) double column machining center with a No.50 spindle, 1,600 mm (63 in) of X travel and 1,300 mm (51.2 in) of Y. It is the machine in Johnford's range where bridge construction, a 50-taper drive and a 6,000 kg (13,200 lb) table first come together.
A typical job is a mold base or die set: a heavy rectangular block, squared on its faces, then pocketed and bored. The 1,700 x 1,100 mm (66.9 x 43.3 in) table and 800 mm (31.5 in) of Z take a block of that kind with room for clamps, and the spindle nose can be brought as close as 150 mm or raised to 950 mm (37.4 in). The standard 15 / 18.5 kW (20.1 / 24.8 hp) drive with Hi Lo Gear does the roughing at up to 6,000 rpm.
Shops that finish molds on the same machine have two paths in Johnford's table. One is the optional 8,000 rpm speed on the geared spindle. The other is a built-in spindle at 10,000 rpm with 26 / 31 kW (34.9 / 41.6 hp) or 31 / 40 kW (41.6 / 53.6 hp), which the accessory list pairs with HSK A100. Linear scales and a thermal compensation system on the spindle are optional and belong on the same quotation for mold work.
Axis speeds are moderate: 15 / 15 / 12 m/min (591 / 591 / 472 ipm) rapid and 1~10,000 mm/min cutting feed. The 24-tool arm type changer is standard, with tools up to 15 kg (33 lb), 400 mm (15.7 in) long and Ø200 mm (Ø7.8 in) across.
Full Specifications
| Parameter | Value |
|---|---|
| Distance Between Columns | 1,300 mm (51.2 in) |
| Table Size | 1,700 x 1,100 mm (66.9 x 43.3 in) |
| X Axis Travel | 1,600 mm (63 in) |
| Y Axis Travel | 1,300 mm (51.2 in) |
| Z Axis Travel | 800 mm (31.5 in) |
| Distance Spindle Nose to Table | 150~950 mm (5.9~37.4 in) |
| Spindle Taper | BT-50 / CAT-50; HSK A100(Opt.) |
| Spindle Bearing Diameter | 90 mm (3.5 in) |
| Spindle Speed | 6,000, 8,000 rpm (Opt.); 10,000 rpm |
| Spindle Motor Power | 15 / 18.5 kW (20.1 / 24.8 hp) Hi Lo Gear; 26 / 31 kW (34.9 / 41.6 hp) or 31 / 40 kW (41.6 / 53.6 hp) Built-in |
| Rapid Traverse Xyz | 15 / 15 / 12 m/min (591 / 591 / 472 ipm) |
| Cutting Feed Rate | 1~10,000 mm/min (0.04~394 ipm) |
| Max Tool Diameter Adjacent Pockets | Ø125 mm (Ø5 in) |
| Tool Capacity | Arm type 24 / 32 / 40 (Opt.) |
| Max Tool Diameter (full magazine) | Ø200 mm (Ø7.8 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Tool Selection | Bi-direction random type, Shortest path |
| Max Table Load | 6,000 kg (13,200 lb) |
| Machine Dimensions | 5,590 x 3,300 x 3,835 mm (220 x 130 x 151 in) |
| Machine Weight | 20,400 kg (45,000 lb) |
Specifications sourced from johnford.com.tw — verified 2026-10-04
Strengths & Limitations
Strengths
- No.50 geared spindle, 15 / 18.5 kW (20.1 / 24.8 hp), on a bridge with 1,300 mm (51.2 in) between columns
- 6,000 kg (13,200 lb) table load
- Nearly square 1,600 x 1,300 mm X-Y travel with 800 mm (31.5 in) of Z
- Built-in spindle options up to 31 / 40 kW (41.6 / 53.6 hp) at 10,000 rpm
- 90 mm (3.5 in) spindle bearing diameter
Limitations
- Standard spindle speed of 6,000 rpm
- X and Y rapids of 15 m/min (591 ipm)
- Largest tool is Ø200 mm (Ø7.8 in), or Ø125 mm (Ø5 in) with adjacent tools
- Needs 5,590 x 3,300 x 3,835 mm (220 x 130 x 151 in) of space
Best For
Frequently Asked Questions
01
A No.50 spindle. The DMC-1600H has BT-50 / CAT-50, a 90 mm (3.5 in) bearing diameter and a 15 / 18.5 kW (20.1 / 24.8 hp) Hi Lo Gear drive. The DMC-1600 has BT-40 / CAT-40, a 70 mm (2.8 in) bearing diameter and 7.5 / 11 kW (10.1 / 14.8 hp).
02
1,600 mm (63 in) in X, 1,300 mm (51.2 in) in Y and 800 mm (31.5 in) in Z, with 150~950 mm (5.9~37.4 in) between spindle nose and table. The table measures 1,700 x 1,100 mm (66.9 x 43.3 in).
03
Yes. The spindle motor row lists a built-in spindle of 26 / 31 kW (34.9 / 41.6 hp) or 31 / 40 kW (41.6 / 53.6 hp), and the speed row shows 10,000 rpm for it. The optional accessory list names a 10,000 rpm HSK A100 built-in spindle.
04
20,400 kg (45,000 lb), with dimensions of 5,590 x 3,300 x 3,835 mm (220 x 130 x 151 in). Foundation bolts and levelling pads are supplied as standard accessories.
More from Johnford
Other Vertical Machining Centers (VMC)
FANUC Robodrill α-D21MiB5ADV Plus
Huron KX 30
Matsuura LV-500
Willemin-Macodel 401S2
