Ibarmia P26
Key Specifications
Tool Capacity
Spindle Power
max swing diameter
max part height
b axis range
a axis range
How much does the Ibarmia P26 cost?
Price estimate
We do not have a price for the Ibarmia P26 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Ibarmia P26 is the smallest of the P26, P30 and P36, a 5-axis machining center for parts up to 2,600 mm (102.4 in) in swing diameter and 1,750 mm (68.9 in) tall. Ibarmia lists it in two versions: P Extreme for 5-axis milling, and P Multiprocess, which adds turning to the 5-axis milling.
Size is the only thing in the table that separates it from its siblings. The P30 takes a 3,000 mm (118.1 in) swing with 1,950 mm (76.8 in) of part height, and the P36 goes to 3,600 mm (141.7 in) and 2,150 mm (84.6 in). Looking across to the T series, the T22 lists the same 1,750 mm (68.9 in) part height as the P26 over a smaller 2,200 mm (86.6 in) swing. Spindle power and magazine size are quoted identically for all of them, up to 84 kW (112.6 hp) and up to 360 positions, so picking the P26 is a decision about part envelope.
Two heads are listed. The THC head tilts on a B axis from -15º to +195º, and the THR head on an A axis from -45º to +135º. Both the power and the magazine figure are maximums, so confirm which spindle and how many positions a quoted configuration actually carries.
Full Specifications
| Parameter | Value |
|---|---|
| Max Swing Diameter | 2,600 mm (102.4 in) |
| Max Part Height | 1,750 mm (68.9 in) |
| Spindle Motor Power | Up to 84 kW (112.6 hp) |
| B Axis Range | -15º/+195º (THC head) |
| A Axis Range | -45º/+135º (THR head) |
| Tool Capacity | Tool magazines up to 360 positions |
| Versions | P Extreme (5-axis milling) / P Multiprocess (5-axis turning and milling) |
Specifications sourced from ibarmia.com — verified 2026-10-03
Strengths & Limitations
Strengths
- Takes parts up to 2,600 mm (102.4 in) in swing diameter and 1,750 mm (68.9 in) in height
- Spindle power is listed at up to 84 kW (112.6 hp), the same ceiling Ibarmia gives the larger P30 and P36
- Tool magazines run to 360 positions, enough to keep the tooling for several jobs loaded at once
- The P Multiprocess version combines 5-axis turning and milling in one machine
Limitations
- Smallest envelope of the three P sizes: the P30 swings 3,000 mm (118.1 in) and the P36 3,600 mm (141.7 in)
- The 84 kW (112.6 hp) and 360-position figures are upper limits; the table does not say what a base machine carries
- No spindle speed, torque, axis travel or table load is listed, so those have to be requested from Ibarmia
Best For
Frequently Asked Questions
01
The table gives a maximum swing diameter of 2,600 mm (102.4 in) and a maximum part height of 1,750 mm (68.9 in). Those two figures define the envelope. Axis travels and table load are not listed, so a part close to either limit should be checked against Ibarmia's layout drawing.
02
When the work fits inside 2,600 mm (102.4 in) of swing and 1,750 mm (68.9 in) of height. The P30 extends those to 3,000 mm (118.1 in) and 1,950 mm (76.8 in), but the listed spindle power, up to 84 kW (112.6 hp), and the magazine limit of 360 positions are the same on both.
03
Two. The THC head has a B axis with a range of -15º/+195º. The THR head has an A axis with a range of -45º/+135º. The table does not tie either head to the Extreme or the Multiprocess version, so ask which combinations are offered.
More from Ibarmia
Other 5-Axis Machining Centers
DMG Mori DMU 65 FD monoBLOCK 2nd Generation
Onsrud F148CH
Makino D800Z 40T
Akira Seiki RMV250RT
