Mazak VERSATECH V-100N

$1,200,000 - $2,000,000 Updated 2026-03-19

Key Specifications

X Travel

2,000 mm (78.7 in)

Y Travel

4,000 mm (157.5 in)

Z Travel

750 mm (29.5 in)

Max Spindle

10,000 RPM

Spindle Taper

BT 50 / HSK-A100

Tool Capacity

40 (ATC, expandable to 120)

Overview

The Mazak VERSATECH V-100N is a large-format 5-axis double-column (bridge-type) machining center designed for heavy-duty machining of oversized workpieces in aerospace, energy, and heavy industry. The VERSATECH platform represents Mazak's top tier for large-part 5-axis work, combining the rigidity of bridge construction with a universal tilting spindle head for full 5-axis simultaneous capability.

Axis travels measure approximately 2,000 x 4,000 x 750 mm (78.7 x 157.5 x 29.5 in) in X/Y/Z, with the exact configuration varying by model variant. The V-100N designation indicates the machine accommodates workpieces up to approximately 1,000 mm (39.4 in) in the cross-rail direction. The A/C universal spindle head provides continuous tilting capability for simultaneous 5-axis contouring on complex sculptured surfaces.

The spindle runs through a BT 50 or HSK-A100 interface at up to 10,000 RPM with 37 kW (50 hp), providing the torque needed for aggressive roughing in titanium, Inconel, and steel while maintaining the accuracy for finishing complex contours. Table load capacity reaches 10,000 kg (22,046 lb) for heavy aerospace structural components and energy sector workpieces.

The bridge construction with box-way guideways provides exceptional rigidity and vibration damping for heavy cutting. Rapid traverse reaches 24 m/min. The MAZATROL SmoothG CNC handles complex 5-axis toolpath execution. At approximately 40,000 kg (88,185 lb), the VERSATECH V-100N provides massive thermal stability.

Competitors include the Pama Speedram, SNK RB-7VM, Toshiba MPF series, and Jobs Jomach. New VERSATECH V-100N machines price between $1,200,000 and $2,000,000 depending on configuration.

Full Specifications

Parameter	Value
X-Axis Travel	2,000 mm (78.7 in)
Y-Axis Travel	4,000 mm (157.5 in)
Z-Axis Travel	750 mm (29.5 in)
A Axis Range	-30 to +120 degrees (universal head)
C Axis Range	360 degrees (continuous)
Max Spindle Speed	10,000 RPM
Spindle Taper	BT 50 / HSK-A100
Spindle Motor Power	37 kW (50 hp)
Tool Capacity	40 (ATC, expandable to 120)
Table Size	122.05″ × 393.7″
Max Table Load	10,000 kg (22,046 lb)
Rapid Traverse Rate	24 m/min (945 ipm)
Machine Type	Double-column (bridge) 5-axis with universal spindle head
CNC Control	MAZATROL SmoothG CNC
Guide Type	Box ways
Machine Weight	40,000 kg (88,185 lb) approx.
Tool Shank	CAT No.50
Max Spindle Speed	8000 min-1(rpm)
Max Workpiece Size	393.7″ × 147.64″ × 68.9″

Specifications sourced from mazak.com — verified 2026-03-28

Strengths & Limitations

Strengths

Massive work envelope with 4,000 mm Y-travel handles the largest aerospace structural parts, energy components, and heavy industry workpieces
Universal tilting spindle head provides full 5-axis simultaneous capability on large parts that trunnion-table machines cannot accommodate
10,000 kg table load capacity supports the heaviest aerospace and energy sector workpieces without deflection
Bridge construction with box-way guideways provides exceptional rigidity and vibration damping for heavy cuts in titanium and steel
37 kW BT 50/HSK-A100 spindle delivers the torque for aggressive roughing while maintaining finishing accuracy
40,000 kg machine mass provides outstanding thermal stability for consistent accuracy over long machining cycles

Limitations

Starting at $1,200,000, the VERSATECH V-100N is a major capital investment requiring high-value work to justify
40,000 kg machine weight requires extensive foundation engineering and heavy rigging for installation
24 m/min rapid traverse is slow by modern standards, adding significant non-cutting time on large-envelope positioning
10,000 RPM spindle speed limits high-speed aluminum finishing; HSK-A100 version offers better balance at speed

Best For

Aerospace OEMs and Tier 1 suppliers machining large structural components in titanium and aluminum including wing ribs, bulkheads, landing gear beams, and fuselage frames Energy sector manufacturers machining large turbine casings, generator frames, and nuclear vessel components Heavy equipment manufacturers producing large machine bases, press frames, and structural components requiring 5-axis access Defense contractors machining large naval and military structural components in high-strength materials Shops requiring the combination of large-envelope 5-axis capability with heavy cutting power for difficult materials

Frequently Asked Questions

01 What does a Mazak VERSATECH V-100N cost?

New VERSATECH V-100N machines range from $1,200,000 to $2,000,000 depending on spindle type, head configuration, ATC capacity, and automation. Installation, rigging, and foundation costs can add $100,000-$300,000 to the total investment.

02 How does the VERSATECH differ from the FJV 5-Face?

The VERSATECH is a significantly larger and more capable machine. It offers much larger travels (4,000 mm Y vs 760 mm), heavier table load (10,000 vs 2,500 kg), full 5-axis simultaneous capability versus indexed 5-face access, and is designed for the most demanding large-part applications. The FJV 5-Face targets mid-size parts with 5-face (not full 5-axis) capability.

03 What spindle options are available?

The VERSATECH V-100N is available with BT 50 and HSK-A100 spindle interfaces. HSK-A100 provides better rigidity and balance at higher speeds. Multiple head configurations are available including continuous A/C heads for full 5-axis contouring and indexing heads for 5-face work at lower cost.

04 What foundation does the VERSATECH require?

At 40,000 kg, the VERSATECH V-100N requires a purpose-built reinforced concrete foundation, typically 400-500 mm thick with engineered isolation. Most installations require a foundation study by a structural engineer. Mazak provides detailed foundation drawings and specifications during the quotation process.