HNK HKDB-130F(1Mx16M)
Key Specifications
Spindle Taper
Table Size
Spindle Power
max table load
x axis travel
y axis travel
How much does the HNK HKDB-130F(1Mx16M) cost?
Price estimate
We do not have a price for the HNK HKDB-130F(1Mx16M) that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The HNK HKDB-130F(1Mx16M) stretches the column-moving duplex boring machine to a 1,000 x 16,000 mm (39.4 x 629.9 in) fixed table, with 16,000 mm (629.9 in) of X travel for its two spindle columns.
HNK explains the purpose of the long stroke in its series description: set-up time is minimized by extending the X-axis stroke over a fixed table. In practice a sixteen-metre table is rarely filled by one part. It is divided into stations. While the columns machine a part at one end, the crane unloads and reloads the other end, and because the two columns can travel simultaneously or independently, they can also split up and work two stations at once.
That is pendulum machining, and it is what separates this model from the HKDB-130F(1Mx5M), which shares its 1,000 mm table width, 550 mm (21.7 in) Z travel and 200 to 1,300 mm (7.9 to 51.2 in) spindle gap. The longer machine also lists 2,000 mm (78.7 in) of Y travel as its stated figure, with the spindle centre from 0 to 2,000 mm (0.0 to 78.7 in) above the table top.
Table load is 20,000 kg (44,092 lb). Each column carries a Ø130 mm (5.1 in) spindle on an ISO No.50 taper, running 5 to 2,500 rpm with 22/26 kW (29.5/34.9 hp), cont/30min. Fanuc 31i-B and Siemens 840D are the listed controls.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size | 1,000 x 16,000 mm (39.4 x 629.9 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| X Axis Travel | 16,000 mm (629.9 in) |
| Y Axis Travel | 2,000 mm (78.7 in) |
| Z Axis Travel | 550 mm (21.7 in) |
| Spindle Heads | 2 |
| Distance Between Spindle Ends | 200 ~ 1,300 mm (7.9 ~ 51.2 in) |
| Distance Table Top to Spindle Center | 0 ~ 2,000 mm (0.0 ~ 78.7 in) |
| Spindle Taper | ISO No.50 |
| Spindle Diameter | Ø130 mm (5.1 in) |
| Spindle Motor Power | 22/26 kW (29.5/34.9 hp) (cont/30min) |
| Spindle Speed Range | 5 ~ 2,500 rpm |
| CNC Control | Fanuc 31i-B, Siemens 840D |
Specifications sourced from en.hnkkorea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 16,000 mm (629.9 in) of X travel over a fixed table
- Columns travel simultaneously or independently, allowing two work stations
- 2,000 mm (78.7 in) of Y travel from table level
- 20,000 kg (44,092 lb) table load
Limitations
- Table width of 1,000 mm (39.4 in) is the narrowest in the series
- Spindle gap limited to 1,300 mm (51.2 in)
- 20,000 kg (44,092 lb) applies to the whole 16,000 mm table
Best For
Frequently Asked Questions
01
Either for a single very long part, or to set up several parts along the fixed table. HNK says the extended X-axis stroke minimizes set-up time, and the two columns can travel independently, so one end can be reloaded while the other is machined.
02
In width. The HKDB-130F(1.1Mx16M) has a 1,100 x 16,000 mm (43.3 x 629.9 in) table, 600 mm (23.6 in) of Z and a spindle gap up to 1,400 mm (55.1 in). The HKDB-130F(1Mx16M) has a 1,000 mm wide table, 550 mm (21.7 in) of Z and a gap up to 1,300 mm (51.2 in).
03
Two spindle heads, each with a Ø130 mm (5.1 in) spindle, ISO No.50 nose taper, a 5 to 2,500 rpm range and a 22/26 kW (29.5/34.9 hp) drive motor.
04
The distance between table top and spindle centre is given as 0 to 2,000 mm (0.0 to 78.7 in), so the spindle centre can come down to the level of the table top. It is a starred row and can be changed to order.
