HNK HB-130S
Key Specifications
Spindle Taper
Table Size
Spindle Power
x axis travel
y axis travel
z axis travel
How much does the HNK HB-130S cost?
Price estimate
We do not have a price for the HNK HB-130S that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
With the HNK HB-130S the HB series moves to a Ø130 mm (5.1 in) boring spindle. It is the smallest of five machines built on that spindle, with a 1,400 x 1,600 mm (55.1 x 63.0 in) rotary table and base travels of 2,000 mm (78.7 in) in X and 1,500 mm (59.1 in) in Y.
This model has the most figures in braces of any HB. X is 2,000 mm with 3,000 mm (118.1 in) in braces, Y is 1,500 mm with 2,000 mm (78.7 in) in braces, and Z is 1,300 mm (51.2 in) with 1,600 mm (63.0 in) in braces. Taken at the braced values, its travels match the base travels of the HB-130. A buyer should therefore price both: an extended HB-130S and a standard HB-130 cover similar ground with different tables.
The spindle runs 5 to 2,500 rpm on an ISO 50 taper, with a 22/26 kW (29.5/34.9 hp) motor, cont/30min, and 30/35 kW (40.2/46.9 hp) in braces. W-axis travel is 700 mm (27.6 in), twice that of the HB-110M, which lets the quill reach into a housing without long tool extensions.
Table load is 7,000 kg (15,432 lb), or 9,000 kg (19,841 lb) in braces, at 2 rpm rotation and 0.001° indexing. Controls: Fanuc 31i-B, Siemens 840D.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 2,000 mm (78.7 in) {3,000 mm (118.1 in)} |
| Y Axis Travel | 1,500 mm (59.1 in) {2,000 mm (78.7 in)} |
| Z Axis Travel | 1,300 mm (51.2 in) {1,600 mm (63.0 in)} |
| W Axis Travel | 700 mm (27.6 in) |
| Table Size | 1,400 x 1,600 mm (55.1 x 63.0 in) |
| Table Indexing | 0.001° (every 90° indexing by locate pin) |
| Table Type | Rotary |
| Max Rotary Table Load | 7,000 kg (15,432 lb) {9,000 kg (19,841 lb)} |
| Table Rotation Speed | 2 rpm |
| Spindle Diameter | Ø130 mm (5.1 in) |
| Spindle Speed Range | 5 ~ 2,500 rpm |
| Spindle Taper | ISO 50 |
| Spindle Motor Power | 22/26 kW (29.5/34.9 hp) {30/35 kW (40.2/46.9 hp)} (cont/30min) |
| CNC Control | Fanuc 31i-B, Siemens 840D |
Specifications sourced from en.hnkkorea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Ø130 mm (5.1 in) spindle with 700 mm (27.6 in) of W-axis travel
- 22/26 kW (29.5/34.9 hp) motor, with 30/35 kW (40.2/46.9 hp) in braces
- X, Y and Z each list a longer travel in braces
- Table rotation of 2 rpm, faster than the 1.4 rpm of the HB-130
Limitations
- 7,000 kg (15,432 lb) base table load, against 12,000 kg (26,455 lb) on the HB-130
- Top speed of 2,500 rpm, below the 3,000 rpm of the HB-110
- Base Y travel of 1,500 mm (59.1 in) is no more than the HB-110 offers
Best For
Frequently Asked Questions
01
X 2,000 mm (78.7 in), Y 1,500 mm (59.1 in), Z 1,300 mm (51.2 in) and W 700 mm (27.6 in). HNK prints 3,000 mm (118.1 in), 2,000 mm (78.7 in) and 1,600 mm (63.0 in) in braces after the X, Y and Z figures.
02
Spindle, speed and motor are the same. The HB-130 has base travels of 3,000 mm (118.1 in) in X and 2,000 mm (78.7 in) in Y, a 1,600 x 1,800 mm (63.0 x 70.9 in) table and 12,000 kg (26,455 lb) of load. The HB-130S starts from 2,000 mm (78.7 in), 1,500 mm (59.1 in), a 1,400 x 1,600 mm (55.1 x 63.0 in) table and 7,000 kg (15,432 lb).
03
A Ø130 mm (5.1 in) boring spindle with an ISO 50 taper, a speed range of 5 to 2,500 rpm and a 22/26 kW (29.5/34.9 hp) motor. Spindle speed is a starred row that HNK will change on request.
04
7,000 kg (15,432 lb), with 9,000 kg (19,841 lb) in braces. The table measures 1,400 x 1,600 mm (55.1 x 63.0 in), rotates at 2 rpm and indexes at 0.001° with pin location every 90°.
