Doosan DBM-130L
This model was not found in Doosan's current lineup when we checked on 2026-10-02 (lineup page). It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
X Travel
Y Travel
Z Travel
Max Spindle
Table Size
Spindle Power
How much does the Doosan DBM-130L cost?
Estimated price range
Our best estimate for a cnc boring machine in this class — not a quote from Doosan. Configuration moves it a long way.
Overview
The Doosan DBM-130L is listed as a CNC boring machine with a 130 mm spindle on a 55 kW drive, 4,000 mm of X, 2,500 mm of Y and 1,600 mm of Z travel, and a CNC rotary table for workpieces up to 20,000 kg. DN Solutions, the company that was Doosan Machine Tools until 2022, does not list the DBM-130L in its current lineup. What follows is written from the listed figures, and each one should be checked against the machine itself.
Set beside the DBM-110L, every listed figure grows except speed. The DBM-110L has 3,500 mm of X, 2,000 mm of Y and 1,250 mm of Z with a 37 kW spindle at 3,000 rpm, where the DBM-130L drops to 2,500 rpm for its thicker spindle and roughly 49% more power. A thicker boring spindle deflects less when it is fed out, which is the reason to choose the larger machine for deep bores. The W-axis is listed at 800 mm.
The rotary table is listed at 1,600 x 1,400 mm and the machine at approx. 45,000 kg, so the foundation and the crane are as much a part of the purchase as the machine. Control is listed as Fanuc 31iB5 or Siemens SINUMERIK 840D sl. There is no listed torque, taper, tool magazine or rapid traverse figure.
Full Specifications
| Parameter | Value |
|---|---|
| Spindle Diameter | 130 mm |
| X-Axis Travel | 4,000 mm |
| Y-Axis Travel | 2,500 mm |
| Z-Axis Travel | 1,600 mm (W-axis: 800 mm) |
| Max Spindle Speed | 2,500 rpm |
| Spindle Motor Power | 55 kW |
| Table Size | 1,600 x 1,400 mm (CNC rotary table, 20,000 kg capacity) |
| Max Workpiece Weight | 20,000 kg |
| CNC Control | Fanuc 31iB5 or Siemens SINUMERIK 840D sl |
| Machine Weight | approx. 45,000 kg |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- Listed travels of 4,000 mm in X, 2,500 mm in Y and 1,600 mm in Z, with an 800 mm W-axis
- 130 mm boring spindle with a listed 55 kW drive
- CNC rotary table of 1,600 x 1,400 mm listed for 20,000 kg
- Listed with a Fanuc 31iB5 or Siemens SINUMERIK 840D sl control
Limitations
- Maximum spindle speed is listed at 2,500 rpm, below the 3,000 rpm of the DBM-110L
- No torque, taper, tool magazine or rapid traverse figure is listed
- A listed weight of approx. 45,000 kg means a purpose-built foundation and heavy rigging
- Not in DN Solutions' current lineup, and the listed figures have to be confirmed on the machine
Best For
Frequently Asked Questions
01
The DBM-130L is listed with a 130 mm spindle, 55 kW and 2,500 rpm, and travels of 4,000 x 2,500 x 1,600 mm. The DBM-110L has a 37 kW spindle at 3,000 rpm and travels of 3,500 mm, 2,000 mm and 1,250 mm, with a 1,400 x 1,250 mm table against 1,600 x 1,400 mm here.
02
The listed maximum workpiece weight is 20,000 kg on a CNC rotary table of 1,600 x 1,400 mm. Fixtures count toward that limit, and the figure should be confirmed from the machine's own documentation.
03
The listed travels are 4,000 mm in X, 2,500 mm in Y and 1,600 mm in Z, with a W-axis of 800 mm. The listing does not say which element the W-axis moves, so check that on the machine.
04
The control is listed as Fanuc 31iB5 or Siemens SINUMERIK 840D sl. An individual machine carries one of the two, so confirm which before planning programming and operator training.
