Hartford HSA-532
Image: hartfordcnc.com, Hartford
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
max table load
x axis travel
How much does the Hartford HSA-532 cost?
Price estimate
We do not have a price for the Hartford HSA-532 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Hartford HSA-532 widens the five-metre HSA double-column machining center without changing its table. Y travel is 3,200 mm (126.0 in) over a 5,000 x 2,500 mm (196.9 x 98.4 in) table, X travel is 5,000 mm (196.9 in), and the table load is 20,000 kg (44,092 lb).
What is the wider gantry for, if the table and its load are the same as on the HSA-528? Clearance between the columns. A part may be wider than the table at some height, a fixture may overhang, or a right-angle head may need room to work on a side face. With 3,200 mm of Y the spindle can travel well beyond each table edge.
The table is carried on three X-axis linear guideways, and the X ballscrew is supported as standard on models above 5 meters according to Hartford. Columns are extra-large, joined to the base over 1,250mm.
All three #50 spindle drives are listed: gear head at 6,000 / 8,000 rpm, DDS at 10,000 / 12,000 rpm and built-in at 12,000 rpm. The base motor is 15 / 18.5 kW and the largest option 30 /37 kW. Z travel is 780 mm, or 1,000 mm or 1,200 mm. The magazine holds 32 tools, or 40 or 60.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size | 5,000 x 2,500 mm (196.9 x 98.4 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 780, opt. 1,000 / 1,200 mm |
| Spindle Taper | #50 |
| Spindle Speed Dds | 10,000 / 12,000 rpm |
| Spindle Speed Gear | 6,000 / 8,000 rpm |
| Spindle Speed Built in | 12,000 rpm |
| Tool Capacity | A: 32 (40 / 60) pcs |
| Tool Shank | BT-50 (CAT50 / DIN69871A / BBT50) |
| Spindle Motor Power | 15 / 18.5 (opt. 18.5 / 22, 22 / 26, 30 /37) kW (Cont. / 30 min) |
Specifications sourced from hartfordcnc.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 3,200 mm (126.0 in) of Y travel over a 2,500 mm wide table
- 20,000 kg (44,092 lb) table load on three X-axis guideways
- Supported X ballscrew as standard above 5 meters, per Hartford
- Gear, DDS and built-in #50 spindles
- Z options of 1,000 mm and 1,200 mm
Limitations
- Same table and load as the narrower HSA-528
- Maximum spindle speed of 12,000 rpm
- Base Z travel of 780 mm on a five-metre machine
- The page does not state whether Y ballscrew support is standard for x32 models
Best For
Frequently Asked Questions
01
3,200 mm (126.0 in). X travel is 5,000 mm (196.9 in) and Z travel is 780 mm, with 1,000 mm and 1,200 mm as options.
02
5,000 x 2,500 mm (196.9 x 98.4 in), rated for an average load of 20,000 kg (44,092 lb). It runs on three linear guideways in X.
03
The HSA-536, which has 3,600 mm (141.7 in) of Y travel and a 5,000 x 3,000 mm (196.9 x 118.1 in) table rated for 21,000 kg (46,296 lb). The HSA-532 keeps the 2,500 mm wide table.
04
15 / 18.5 kW as the base rating, with 18.5 / 22 kW, 22 / 26 kW and 30 /37 kW as options, as continuous / 30 min figures for a #50 spindle.
More from Hartford
Other Vertical Machining Centers (VMC)
Tongtai TMV-1350A
Vision Wide HF-5040 / HF-5047
Johnford DMC-2600SH
Mazak NEXUS 6800-II
Hyundai WIA KF5/50
