Han's Laser HBS0625
Key Specifications
press force
max bending width
closed height
distance between uprights
throat depth
motor power
How much does the Han's Laser HBS0625 cost?
Price estimate
We do not have a price for the Han's Laser HBS0625 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Han's Laser HBS0625 is the longest of the 600 kN machines in the HBS press brake series, with a maximum bending width of 2,550 mm (100.4 in). That makes it the lightest-loaded bed in the range: the same force as the HBS0615, spread over a much longer bed.
Is that a weakness? Only for the wrong work. Thin sheet in long lengths, such as trims, light gauge cladding, ducting and cabinet backs, needs length far more than force, and a 600 kN machine does it with a small motor. For anything heavier across the full bed, the HBS1131 offers 1,100 kN.
Two figures set this model apart from its 600 kN siblings. Closed height is 525 mm (20.7 in), where the HBS0620 has 485 mm (19.1 in). And fast down speed is 190 mm/s, the quickest of the three. The working speed, 20 mm/s, and the return, 200 mm/s, are common to the group. Distance between uprights is 2,100 mm (82.7 in) and throat depth 350 mm (13.8 in).
The drive is modest: 8.5 kW (11.4 hp) and an 80 L split stainless tank. With a bed this long at this force, the bidirectional mechanical compensation Han's Laser fits is what keeps the angle constant from end to end. The control is the IFT CNC system. The overall dimensions printed for this model look inconsistent with its siblings and are not repeated here; get a layout drawing from the maker.
Full Specifications
| Parameter | Value |
|---|---|
| Press Force | 600 kN |
| Max Bending Width | 2,550 mm (100.4 in) |
| Closed Height | 525 mm (20.7 in) |
| Distance Between Uprights | 2,100 mm (82.7 in) |
| Throat Depth | 350 mm (13.8 in) |
| Motor Power | 8.5 kW (11.4 hp) |
| Oil Tank Capacity | 80 L |
| Fast Down Speed | 190 mm/s |
| Working Speed | 20 mm/s |
| Return Speed | 200 mm/s |
Specifications sourced from hanslaser.net — verified 2026-10-05
Strengths & Limitations
Strengths
- 2,550 mm (100.4 in) bending width on an 8.5 kW (11.4 hp) drive
- Closed height of 525 mm (20.7 in), the highest among the 600 kN models
- Fast down speed of 190 mm/s
- Mechanical compensation adjustable in both directions
Limitations
- 600 kN over 2,550 mm (100.4 in) gives the lowest force per unit length in the series
- Throat depth is 350 mm (13.8 in), less than the 410 mm (16.1 in) of the HBS1131
- No reliable overall dimensions or weight are available from the table
Best For
Frequently Asked Questions
01
The maximum bending width is 2,550 mm (100.4 in). Parts that must pass between the side frames are limited by the 2,100 mm (82.7 in) distance between uprights, beyond the 350 mm (13.8 in) throat depth.
02
For thin material, yes. Press force is 600 kN, the same as on the HBS0615 with its 1,500 mm (59.1 in) bed, so the force available per metre is lower here. Check your thickest full-length job on a bending force chart; the HBS1131 provides 1,100 kN over 3,100 mm (122.0 in).
03
Fast down speed is 190 mm/s, working speed 20 mm/s and return speed 200 mm/s. Motor power is 8.5 kW (11.4 hp) and the oil tank holds 80 L.
04
The height printed for this model in the maker's table equals its length and does not fit the other 600 kN machines, such as the HBS0620 at 2,748 × 1,400 × 2,481 mm (108.2 × 55.1 × 97.7 in). The figure has been left out. Ask Han's Laser for a foundation drawing.
