Cincinnati XFORMe 135XFe10
Key Specifications
overall die surface
closed height
stroke length
open height
throat
approach speed
How much does the Cincinnati XFORMe 135XFe10 cost?
Price estimate
We do not have a price for the Cincinnati XFORMe 135XFe10 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
With a 12 ft (3,658 mm) overall die surface, the Cincinnati XFORMe 135XFe10 is the longest hybrid XFORM on the 14 in (356 mm) stroke frame. Open height is 21 in (533 mm), closed height 7 in (178 mm) and throat 18 in (457 mm).
One feature of the hybrid table stands out when the rows are read together: ram speed does not fall as the frame grows. This model is listed at 550 ipm (13,970 mm/min) approach, 70 ipm (1,778 mm/min) forming and 550 ipm (13,970 mm/min) return, exactly the figures of the XFORMe 90XFe8. In the hydraulic table, by contrast, the XFORM 135XF10 forms at 55 ipm (1,397 mm/min).
Thickness variation shows up most on long bends, because a sheet that is slightly heavy at one end changes the angle along the part. Dynamic Thickness Compensation, standard on XFORMe models, is the maker's answer to that, and a 12 ft bed is where it earns its keep.
Full Specifications
| Parameter | Value |
|---|---|
| Overall Die Surface | 12 ft (3,658 mm) |
| Closed Height | 7 in (178 mm) |
| Stroke Length | 14 in (356 mm) |
| Open Height | 21 in (533 mm) |
| Throat | 18 in (457 mm) |
| Approach Speed | 550 ipm (13,970 mm/min) |
| Forming Speed | 70 ipm (1,778 mm/min) |
| Return Speed | 550 ipm (13,970 mm/min) |
Specifications sourced from e-ci.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 12 ft (3,658 mm) die surface with no loss of ram speed against the smaller XFORMe sizes
- 70 ipm (1,778 mm/min) forming, ahead of the 55 ipm (1,397 mm/min) of the XFORM 135XF10
- Standard Dynamic Thickness Compensation for long bends
Limitations
- Open height of 21 in (533 mm), two frames below the 24 in (610 mm) of the XFORMe 350XFe10
- Approach at 550 ipm (13,970 mm/min) is slower than the 650 ipm (16,510 mm/min) of the XFORM 135XF10
Best For
Frequently Asked Questions
01
Approach and return are 550 ipm (13,970 mm/min) and forming is 70 ipm (1,778 mm/min). Cincinnati lists the same three speeds for the XFORMe 135XFe8, which has a 10 ft (3,048 mm) die surface.
02
Its dual servo-motor bidirectional pump runs only during the working portion of the stroke, which Cincinnati calls tonnage on demand. Energy consumption is reduced while the ram is idle.
