Haco Synchromaster 4100-175
This model was not found in Haco's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
bending force
working length
throat depth
stroke
open height
back gauge axes
How much does the Haco Synchromaster 4100-175 cost?
Estimated price range
Our best estimate for a cnc press brake in this class — not a quote from Haco. Configuration moves it a long way.
Overview
With 4,100 mm (161 in) of working length and a listed 175 metric tons (1,716 kN), the Haco Synchromaster 4100-175 is a press brake for long panels more than for short, heavy plate. The model is absent from Haco's current lineup, so read the listed figures as a guide to an older machine and confirm them on site.
Spreading 175 metric tons (1,716 kN) across 4,100 mm (161 in) leaves less force per unit of length than a shorter machine of the same tonnage would have. Full-length bends are therefore limited to thinner material, while a short part can use the force in a concentrated zone, within whatever centre-load limit the manual gives.
The frame dimensions are generous: 500 mm (19.7 in) of throat, 250 mm (9.84 in) of stroke and 530 mm (20.9 in) of open height. X, R, Z1 and Z2 are listed as standard back gauge axes (4 axes) with additional axes optional, and the control row names a Delem DA-69T CNC touchscreen controller with 3D simulation and offline programming. Weight is listed at approx. 22,000 kg (48,500 lb), which decides the crane and the foundation.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 175 metric tons (1,716 kN) |
| Working Length | 4,100 mm (161 in / ~13.5 ft) |
| Throat Depth | 500 mm (19.7 in) |
| Stroke | 250 mm (9.84 in) |
| Open Height | 530 mm (20.9 in) |
| Back Gauge Axes | X, R, Z1, Z2 standard (4 axes); additional axes optional |
| Control System | Delem DA-69T CNC touchscreen controller with 3D simulation and offline programming |
| Machine Weight | Approx. 22,000 kg (48,500 lb) |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- 4,100 mm (161 in) of working length takes long panels and profiles in one hit
- 500 mm (19.7 in) throat depth with 250 mm (9.84 in) of stroke
- Four back gauge axes (X, R, Z1, Z2) are listed as standard
- The control is listed with 3D simulation and offline programming
Limitations
- Approx. 22,000 kg (48,500 lb): transport, crane capacity and foundation all need planning
- Back gauge axes beyond X, R, Z1 and Z2 are optional
- No ram speeds or crowning details appear in the listed figures
Best For
Frequently Asked Questions
01
Working length is listed at 4,100 mm (161 in), with 175 metric tons (1,716 kN) of bending force. The force needed rises with bend length, so a full-length bend uses up the tonnage on thinner material than a short bend would. Work out the tonnage for the actual length, thickness and die opening.
02
The back gauge row gives X, R, Z1 and Z2 as standard (4 axes), with additional axes optional. The control row names a Delem DA-69T CNC touchscreen controller with 3D simulation and offline programming. Confirm both on the machine itself.
03
The listed weight is approx. 22,000 kg (48,500 lb). That figure sets the crane or rigging needed and the floor loading under the frames, and it should be confirmed from the machine's plate because the listed figures are unconfirmed.
More from Haco
Other CNC Press Brakes
