Feeler SHM-11020RF
Key Specifications
Max Spindle
Tool Capacity
Table Size
max table load
x axis travel
y axis travel
How much does the Feeler SHM-11020RF cost?
Price estimate
We do not have a price for the Feeler SHM-11020RF that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Feeler lists the SHM-11020RF in the first column of its SHB table: a horizontal boring and milling machine with a 110 mm (4.3 in) boring spindle, a 1,000 x 1,200 mm (39.4 x 47.2 in) rotary table and fixed travels of 2,000 mm (78.7 in) in X and 1,600 mm (63.0 in) in Y. It is the smallest machine on that page and the only one whose travels are single figures instead of ranges.
The table carries 5 ton. Z travel is 1,200 mm, with 1,400 mm in brackets as the longer alternative, and the boring spindle extends 400 mm (15.7 in) on the W axis. That quill travel is what makes a boring mill different from a horizontal machining center: the spindle can reach deep into a housing to machine an inner wall or a far bore while the heavy column stays back.
Spindle speed is 2,500 rpm. Rapids are listed as 10/10/10/5 m/min for X/Y/Z/W, slow by machining-center standards and normal for this class, where a cut may last many minutes. The magazine holds 40 tools, or 60 as the bracketed option.
Feeler's text for the page describes a rotary table with a dual-lead worm and gear drive that eliminates backlash, hand-scraped table joint surfaces, and optical scale feedback on all three axes and the rotary table. The model code differs from the SHB names in the other columns, and the page says nothing more about it. The spindle taper, motor power and torque are not published.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size | 1,000 x 1,200 mm (39.4 x 47.2 in) |
| Max Table Load | 5 ton |
| X Axis Travel | 2,000 mm (78.7 in) |
| Y Axis Travel | 1,600 mm (63.0 in) |
| Z Axis Travel | 1,200 (1,400) mm (47.2 (55.1) in) |
| W Axis Travel | 400 mm (15.7 in) |
| Boring Spindle Diameter | 110 mm (4.3 in) |
| Max Spindle Speed | 2,500 rpm |
| Rapid Traverse Xyzw | 10/10/10/5 m/min (394/394/394/197 ipm) |
| Tool Capacity | 40 (60) |
Specifications sourced from feeler.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 110 mm (4.3 in) boring spindle with 400 mm of W-axis travel
- 5 ton table load on a 1,000 x 1,200 mm rotary table
- Travels of 2,000 x 1,600 mm in X and Y
- Optical scale feedback on all three axes and the rotary table, per Feeler
- Dual-lead worm and gear table drive that eliminates backlash
Limitations
- Spindle speed is 2,500 rpm, with no higher option listed in this column
- Rapids of 10 m/min on the linear axes and 5 m/min on W
- The model is not described in the text of the page it appears on
- No spindle taper, power or torque is published
Best For
Frequently Asked Questions
01
A horizontal boring and milling machine listed in the first column of Feeler's SHB series table. It has a W-axis boring spindle of 110 mm diameter, a 1,000 x 1,200 mm table rated 5 ton and travels of 2,000 x 1,600 mm in X and Y.
02
The travel of the boring spindle, or quill, out of the spindle head. On the SHM-11020RF it is 400 mm (15.7 in), with a W rapid of 5 m/min. It lets the tool reach into a part beyond what the Z axis alone allows.
03
The table prints 1200(1400): 1,200 mm (47.2 in), with 1,400 mm in brackets. Feeler's tables put optional or alternative values in brackets.
04
The SHB-110XXRS has the same 110 mm spindle on a larger machine: a 1,400 x 1,600 mm table rated 10 ton, X travel of 2,500-4,000 mm and W travel of 500 (700) mm, with spindle speed listed as 2,500 (3,200) rpm.
More from Feeler
Other CNC Boring Machines
KRC HBM-16T
Vision Wide VBE-110-1416
Soraluce SP 8000
HNK HFB-200
DN Solutions DBC 250 L II
