Ermak Power-Bend Falcon 4270-135
Image: ermaksan.com.tr, Ermak
Key Specifications
bending length
bending power
distance between columns
y rapid speed
y working speed
y return speed
How much does the Ermak Power-Bend Falcon 4270-135 cost?
Price estimate
We do not have a price for the Ermak Power-Bend Falcon 4270-135 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
A 14 ft bed is a standard size in markets that buy sheet in feet, and the Ermak Power-Bend Falcon 4270-135 is the lightest Falcon built to it. Bending length is 4,270 mm (168.1 in); bending power is 135 Ton (149 US tons).
The differences from the Power-Bend Falcon 4100-135 are small but real: the columns are further apart, 3,780 mm (148.8 in) here against 3,600 mm there, and the weight is 10,400 kg against 10,200 kg. Motor, oil fill, speeds and opening are identical.
Those shared figures are an 11 kW motor, 200 L of oil, a 200 mm/s approach, a 10 mm/s working speed and a 120 mm/s return. The ram opens 275 mm within 550 mm of daylight.
This is a low machine at 2,600 mm, lower than several shorter Falcons, which makes it one of the easier long brakes to bring through a workshop door. It is 6,170 mm long and 2,160 mm wide.
At this length and tonnage the work is thin sheet: signage, facade cassettes, long drip edges. The table is 90 mm wide and the throat 410 mm. Crowning is motorized, and the two-axis backgauge reaches 800 mm in X.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 4,270 mm (168.1 in) |
| Bending Power | 135 Ton (149 US tons) |
| Distance Between Columns | 3,780 mm (148.8 in) |
| Y Rapid Speed | 200 mm/s (7.87 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 120 mm/s (4.72 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 200 L (52.8 US gal) |
| Motor Power | 11 kW (14.8 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 6,170 mm (242.9 in) |
| Height | 2,600 mm (102.4 in) |
| Width | 2,160 mm (85 in) |
| Machine Weight | 10,400 kg (22,928 lb) |
Specifications sourced from ermaksan.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- 4,270 mm (14 ft) bending length in a 10,400 kg machine
- 3,780 mm between the columns
- Only 2,600 mm high, easy to bring indoors
- 200 mm/s approach with an 11 kW motor
Limitations
- 135 Ton spread over 4,270 mm is strictly a thin-sheet rating
- The 120 mm/s return slows the cycle on long strokes
- A 90 mm table rules out wide dies
- Two sheet supports for very long blanks
Best For
Frequently Asked Questions
01
For the extra bed length and the wider passage. It bends 4,270 mm and has 3,780 mm between the columns. The Power-Bend Falcon 4100-135 bends 4,100 mm with 3,600 mm between columns.
02
Height is 2,600 mm, length 6,170 mm and width 2,160 mm. At 10,400 kg it can be handled by a medium-capacity crane or a pair of forklifts with suitable rigging.
03
Y rapid speed 200 mm/s, Y working speed 10 mm/s and Y return speed 120 mm/s. The backgauge X axis runs at 500 mm/s and the R axis at 350 mm/s.
04
The operator and the 2 standard sheet supports at the front. For support behind the die, Ermak offers pneumatic rear supports, which are optional support latches mounted to the machine.
