Dener XL 40175
Image: en.dener.com, Dener
Key Specifications
bending length
bending capacity
approach speed
bending speed
return speed
stroke
How much does the Dener XL 40175 cost?
Price estimate
We do not have a price for the Dener XL 40175 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Four metres of bed is the reason to look at the Dener XL 40175. This Smart XL hydraulic press brake bends 4,050 mm (159.4 in) with 175 ton, the lowest force Dener pairs with that length, and it leaves 3,550 mm clear between the side frames.
Long and light is a specific kind of work: door frames, lighting troughs, shelving uprights, roof and wall trims. None of it needs much tonnage, all of it needs length. For that work the 175 ton rating is enough, and the machine keeps the quicker ram of the lower force class, approaching at 150 mm/sec and returning at 130 mm/sec.
The opening is the standard large-frame set. Stroke 350 mm, daylight 600 mm, throat depth 450 mm. The hydraulic unit is a 22 kW (29.5 hp) main motor on a 300 lt tank.
Plan the floor carefully. Overall length is 4,740 mm, maximum height 3,030 mm and weight 14,200 kg (31,305 lb). A long part swinging upward during the bend needs room in front of the machine too, which is where the optional sheet follower system earns its place. The standard backgauge has X and R axes only.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 4,050 mm (159.4 in) |
| Bending Capacity | 175 ton |
| Approach Speed | 150 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 130 mm/sec |
| Stroke | 350 mm (13.8 in) |
| Daylight | 600 mm (23.6 in) |
| Throat Depth | 450 mm (17.7 in) |
| Distance Between Side Frames | 3,550 mm (139.8 in) |
| Machine Length | 4,740 mm (186.6 in) |
| Maximum Height | 3,030 mm (119.3 in) |
| Main Motor Power | 22 kW (29.5 hp) |
| Oil Tank | 300 lt |
| Machine Weight | 14,200 kg (31,305 lb) |
Specifications sourced from en.dener.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 4,050 mm bending length with 3,550 mm between the side frames
- 150 mm/sec approach, the fastest of the four-metre XL models
- 600 mm daylight and 350 mm stroke
- 22 kW (29.5 hp) main motor
Limitations
- 175 ton over 4,050 mm restricts full-length bends to thin and medium sheet
- 14,200 kg (31,305 lb) on a 4,740 mm footprint
- A sheet follower for long parts is optional, not standard
Best For
Frequently Asked Questions
01
A bending length of 4,050 mm (159.4 in) at 175 ton. The side frames are 3,550 mm apart, so parts up to that width pass through the machine, and the throat depth is 450 mm.
02
Approach speed is 150 mm/sec, bending speed 10 mm/sec and return speed 130 mm/sec. The XL 40220 on the same bed approaches at 140 mm/sec.
03
The table gives an overall length of 4,740 mm, a maximum height of 3,030 mm and a weight of 14,200 kg (31,305 lb). Confirm the width with Dener, since the width figures printed for this size do not agree with each other.
04
Front support arms are standard equipment. A sheet follower system, which lifts the sheet as the bend closes, is listed as an option for the XL series.
