Ermak Power-Bend Falcon 3100-100
Image: ermaksan.com.tr, Ermak
Key Specifications
bending length
bending power
distance between columns
y rapid speed
y working speed
y return speed
How much does the Ermak Power-Bend Falcon 3100-100 cost?
Price estimate
We do not have a price for the Ermak Power-Bend Falcon 3100-100 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Three-metre sheet is the commonest stock in a fabrication shop, and the Ermak Power-Bend Falcon 3100-100 is the lightest Falcon that takes it. Bending length is 3,100 mm (122 in) and bending power 100 Ton (110 US tons).
Ermak builds it around the small hydraulic unit of the range, a 7.5 kW motor with 150 L of oil. The ram still approaches at 200 mm/s and returns at 155 mm/s; the working speed is 9.5 mm/s. For thin and medium sheet that is a quick cycle on little installed power.
A full sheet does not pass between the side frames. They stand 2,600 mm (102.4 in) apart, so a 3,100 mm part is bent in front of the columns, within the 410 mm throat. Stroke is 275 mm and daylight 530 mm.
The backgauge has 800 mm of travel in X and 250 mm in R, with 2 finger blocks, and there are 2 sheet supports at the front. Crowning is motorized and set by the CNC.
At 6,786 kg this is a light machine for its length, 4,970 mm long, 2,480 mm wide and 2,550 mm high. Buyers who expect to bend thicker material across the full bed should compare the Power-Bend Falcon 3100-175, which has a 15 kW motor, 550 mm of daylight and a weight of 9,086 kg.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 3,100 mm (122 in) |
| Bending Power | 100 Ton (110 US tons) |
| Distance Between Columns | 2,600 mm (102.4 in) |
| Y Rapid Speed | 200 mm/s (7.87 in/s) |
| Y Working Speed | 9.5 mm/s (0.37 in/s) |
| Y Return Speed | 155 mm/s (6.1 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 150 L (39.6 US gal) |
| Motor Power | 7.5 kW (10.1 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 530 mm (20.9 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 4,970 mm (195.7 in) |
| Height | 2,550 mm (100.4 in) |
| Width | 2,480 mm (97.6 in) |
| Machine Weight | 6,786 kg (14,960 lb) |
Specifications sourced from ermaksan.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- 3,100 mm bending length on a 7.5 kW motor
- 200 mm/s rapid approach and 155 mm/s return
- 6,786 kg: the lightest of the 3,100 mm Falcons
- 800 mm X travel and motorized crowning as listed
Limitations
- 100 Ton over 3,100 mm is a light-to-medium gauge rating
- 2,600 mm between the columns: full-length parts stay in the throat
- Daylight of 530 mm with the standard 275 mm stroke
- Working speed of 9.5 mm/s
Best For
Frequently Asked Questions
01
Yes, the bending length is 3,100 mm. The columns are 2,600 mm apart, so a part of full length cannot pass back between them and its flange depth is limited by the 410 mm throat.
02
The main motor is rated 7.5 kW and the hydraulic tank holds 150 L. A start-stop option stops the main motor after 2 minutes without upper beam movement.
03
Ermak's current table follows this model with the Power-Bend Falcon 3100-175, which weighs 9,086 kg and has a 15 kW motor and a 200 L tank. Its rapid approach is 180 mm/s.
04
A motorized two-axis gauge, X and R, with 2 finger blocks. X travels 800 mm at 500 mm/s and R travels 250 mm at 350 mm/s. Pneumatic rear supports are an option.
