Ermak Power-Bend Falcon 3100-260
Image: ermaksan.com.tr, Ermak
Key Specifications
bending length
bending power
distance between columns
y rapid speed
y working speed
y return speed
How much does the Ermak Power-Bend Falcon 3100-260 cost?
Price estimate
We do not have a price for the Ermak Power-Bend Falcon 3100-260 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Plate work on a three-metre bed is the job of the Ermak Power-Bend Falcon 3100-260, which brings 260 Ton (287 US tons) to a bending length of 3,100 mm (122 in).
The frame is built differently from the lighter sizes, and the dimensions show it. Overall length is 4,550 mm, shorter than the Power-Bend Falcon 3100-220 at 5,050 mm, while the height rises to 2,900 mm and the weight to 13,886 kg. A taller, shorter, heavier machine: plan the lifting and the headroom accordingly.
A 22 kW motor supplies the cylinders from 300 L of oil. Rapid approach is 140 mm/s, working speed 10 mm/s and return 135 mm/s. On plate the bend itself takes most of the cycle, so the slower approach costs less than it would on thin sheet.
The table is 220 mm wide and 900 mm high. Stroke, daylight and throat are 275 mm, 550 mm and 410 mm, and the side frames are 2,600 mm (102.4 in) apart.
Backgauge travel is 800 mm in X and 250 mm in R. Two finger blocks and two sheet supports are standard. Ermak's own crowning is motorized on this size; for the heaviest work it also sells hydraulic crowning.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 3,100 mm (122 in) |
| Bending Power | 260 Ton (287 US tons) |
| Distance Between Columns | 2,600 mm (102.4 in) |
| Y Rapid Speed | 140 mm/s (5.51 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 135 mm/s (5.31 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 300 L (79.3 US gal) |
| Motor Power | 22 kW (29.5 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 220 mm (8.7 in) |
| Length | 4,550 mm (179.1 in) |
| Height | 2,900 mm (114.2 in) |
| Width | 2,350 mm (92.5 in) |
| Machine Weight | 13,886 kg (30,613 lb) |
Specifications sourced from ermaksan.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- 260 Ton on a 3,100 mm bed
- 220 mm table width under the die
- 22 kW main motor fed from a 300 L tank
- 4,550 mm overall length is short for the class
Limitations
- 140 mm/s approach, slower than the lighter three-metre Falcons
- 2,900 mm high and 13,886 kg
- Stroke remains 275 mm; the longer stroke starts one size up
- Sheet handling aids are optional
Best For
Frequently Asked Questions
01
It applies 260 Ton across 3,100 mm, with a 220 mm wide table for plate dies and a 22 kW motor. That opens up thicker material at full length.
02
140 mm/s in approach, 10 mm/s when bending and 135 mm/s on the return stroke. Backgauge speeds are unchanged from the rest of the range: 500 mm/s in X and 350 mm/s in R.
03
It stands 2,900 mm high. The Power-Bend Falcon 3100-220 is 2,700 mm high, so check doors and crane hooks if this model replaces a lighter one. Weight is 13,886 kg.
04
At the next tonnage. The Power-Bend Falcon 3100-320 has a 375 mm stroke and 650 mm of daylight with a 30 kW motor. This model has 275 mm and 550 mm.
