Durma AD-S 30175
Key Specifications
bending force
bending length
distance between columns
stroke
daylight
throat depth
How much does the Durma AD-S 30175 cost?
Price estimate
We do not have a price for the Durma AD-S 30175 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
At 175 ton on a 3,050 mm (120.1 in) bed, the Durma AD-S 30175 is where the AD-S hydraulic press brake series moves from sheet into light plate. The force is enough for medium-thickness steel at full length, and the machine picks up a wider table to go with it.
That table is the clearest change from the models below. Durma lists 104 mm (4.1 in) narrow and 240 mm (9.4 in) wide. Larger V openings need larger dies, and a 240 mm (9.4 in) surface carries them without overhang.
The hydraulics grow to an 18.5 kW (24.8 hp) motor on a 200 L tank. Approach speed holds at 160 mm/sec and bending speed at 10 mm/sec. Return is the weak figure: 100 mm/sec, the lowest return speed among Durma's three-metre AD-S models. On long runs of simple parts that costs a little time on every stroke.
Nothing changes in the opening. The columns are 2,600 mm (102.4 in) apart, the throat is 450 mm (17.7 in), stroke 265 mm (10.4 in), daylight 530 mm (20.9 in). Weight rises to 10,900 kg (24,030 lb) on a frame 4,250 mm (167.3 in) long.
With more force on the bed, deflection under load matters more. The standard crowning system is manual, set by the operator for each job. Shops that change material and length often should consider the CNC-controlled motorized crowning from the options list, which Durma says removes the need for shimming.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 175 ton |
| Bending Length | 3,050 mm (120.1 in) |
| Distance Between Columns | 2,600 mm (102.4 in) |
| Stroke | 265 mm (10.4 in) |
| Daylight | 530 mm (20.9 in) |
| Throat Depth | 450 mm (17.7 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 104 mm (4.1 in) narrow / 240 mm (9.4 in) wide |
| Y Rapid Speed | 160 mm/sec |
| Y Working Speed | 10 mm/sec |
| Y Return Speed | 100 mm/sec |
| Y Axis Precision | 0.01 mm |
| X Axis Working Speed | 500 mm/sec |
| X Axis Precision | 0.05 mm |
| X Axis Travel | 650 mm (25.6 in) standard; 1,000 mm (39.4 in) optional |
| R Axis Working Speed | 350 mm/sec |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Precision | 0.1 mm |
| Z Axis Working Speed | 1,000 mm/sec |
| Z Axis Travel | 1,990 mm (78.3 in) |
| Motor Power | 18.5 kW (24.8 hp) |
| Oil Tank Capacity | 200 L |
| Machine Length | 4,250 mm (167.3 in) |
| Machine Width | 1,700 mm (66.9 in) |
| Machine Height | 2,850 mm (112.2 in) |
| Machine Weight | 10,900 kg (24,030 lb) |
Specifications sourced from durmazlar.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- 175 ton over 3,050 mm (120.1 in) for medium-thickness material
- Wide table of 240 mm (9.4 in) available for larger dies
- 18.5 kW (24.8 hp) motor with a 200 L oil tank
- 160 mm/sec rapid speed, matching the AD-S 30135
- 450 mm (17.7 in) throat and 530 mm (20.9 in) daylight
Limitations
- Return speed is 100 mm/sec, the lowest of the three-metre AD-S models
- Manual crowning at 175 ton; the CNC motorized system is extra
- Stroke stays at 265 mm (10.4 in); the AD-S 30320 has 365 mm (14.4 in)
- 10,900 kg (24,030 lb) needs a suitable floor
Best For
Frequently Asked Questions
01
Hardly at all on the way down: rapid speed is 160 mm/sec and working speed 10 mm/sec. The return is slower at 100 mm/sec. The AD-S 30135 is listed with a 120 mm/sec return.
02
The narrow table is 104 mm (4.1 in) wide and the wide table 240 mm (9.4 in). Table height is 900 mm (35.4 in). The wide table is the one to choose for large die blocks and multi-V dies.
03
Not as standard. Durma's standard equipment list for the AD-S series names a manual crowning system. A CNC control motorized crowning system is optional, and Durma states that with crowning the need for shimming is eliminated.
04
It weighs approximately 10,900 kg (24,030 lb). Length is 4,250 mm (167.3 in), width 1,700 mm (66.9 in) and height 2,850 mm (112.2 in). The oil tank holds 200 L.
More from Durma
Other CNC Press Brakes
Bystronic Xpert 250
LVD Easy-Form 80/25
Salvagnini B3 400/4250
Haco Synchromaster 4100-175
