Durma AD-S 25100
Key Specifications
bending force
bending length
distance between columns
stroke
daylight
throat depth
How much does the Durma AD-S 25100 cost?
Price estimate
We do not have a price for the Durma AD-S 25100 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Durma lists one AD-S press brake with a 2,550 mm (100.4 in) bed, and the AD-S 25100 is it: 100 ton on a length that sits between the two-metre and three-metre machines. The size exists for shops whose blanks come off two-and-a-half-metre sheet and who have no use for the extra half metre of a longer frame.
What the shorter bed buys is floor space and mass. The AD-S 25100 is 3,800 mm (149.6 in) long and weighs 7,800 kg (17,196 lb); the AD-S 30100, with the same force, is listed at 4,200 mm (165.4 in) and 8,500 kg (18,739 lb). Width and height are the same on both.
Force per unit of length is higher than on the three-metre 100 ton model, since the same cylinders work a shorter bed. A full-length bend can be made in somewhat heavier sheet here.
The hydraulic unit is an 11 kW (14.8 hp) motor with a 150 L tank. Y rapid speed is 180 mm/sec, with 10 mm/sec in work and a 120 mm/sec return. The frame opening follows the series pattern: 265 mm (10.4 in) of stroke, 530 mm (20.9 in) of daylight, a 450 mm (17.7 in) throat and 2,200 mm (86.6 in) between the columns.
One limit is the table. It is 104 mm (4.1 in) wide and no wide version appears in the table for this model. Standard equipment follows the series list: DT 15 control, servo X axis, manual crowning, European style clamping.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 100 ton |
| Bending Length | 2,550 mm (100.4 in) |
| Distance Between Columns | 2,200 mm (86.6 in) |
| Stroke | 265 mm (10.4 in) |
| Daylight | 530 mm (20.9 in) |
| Throat Depth | 450 mm (17.7 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 104 mm (4.1 in) |
| Y Rapid Speed | 180 mm/sec |
| Y Working Speed | 10 mm/sec |
| Y Return Speed | 120 mm/sec |
| Y Axis Precision | 0.01 mm |
| X Axis Working Speed | 500 mm/sec |
| X Axis Precision | 0.05 mm |
| X Axis Travel | 650 mm (25.6 in) standard; 1,000 mm (39.4 in) optional |
| R Axis Working Speed | 350 mm/sec |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Precision | 0.1 mm |
| Z Axis Working Speed | 1,000 mm/sec |
| Z Axis Travel | 1,580 mm (62.2 in) |
| Motor Power | 11 kW (14.8 hp) |
| Oil Tank Capacity | 150 L |
| Machine Length | 3,800 mm (149.6 in) |
| Machine Width | 1,670 mm (65.7 in) |
| Machine Height | 2,850 mm (112.2 in) |
| Machine Weight | 7,800 kg (17,196 lb) |
Specifications sourced from durmazlar.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- 100 ton on a 2,550 mm (100.4 in) bed, the only AD-S model of this length
- 3,800 mm (149.6 in) long and 7,800 kg (17,196 lb), smaller than the three-metre 100 ton model
- 180 mm/sec Y rapid speed with a 120 mm/sec return
- 2,200 mm (86.6 in) between the columns
- Back gauge X axis runs at 500 mm/sec with 0.05 mm precision
Limitations
- Cannot take a three-metre sheet lengthwise; bending length is 2,550 mm (100.4 in)
- Table width is 104 mm (4.1 in) with no wide-table figure
- Manual crowning is standard; CNC motorized crowning is optional
- Motorized R and Z axes are optional equipment
Best For
Frequently Asked Questions
01
It applies the same 100 ton as the AD-S 30100 on a shorter frame. The AD-S 25100 is 3,800 mm (149.6 in) long and weighs 7,800 kg (17,196 lb). If no part is longer than 2,550 mm (100.4 in), the shorter machine saves space and concentrates the force.
02
Daylight is 530 mm (20.9 in) and the stroke 265 mm (10.4 in). Throat depth is 450 mm (17.7 in), and the columns are 2,200 mm (86.6 in) apart. The table stands 900 mm (35.4 in) high.
03
The table lists a motor power of 11 kW (14.8 hp) and an oil tank capacity of 150 L. Durma offers an oil cooler or oil heater as optional equipment for shops with very warm or very cold conditions.
04
No. The standard back gauge is a servo X axis. The table's Z figures, 1,580 mm (62.2 in) of working distance at 1,000 mm/sec, describe the optional motorized Z1 and Z2 fingers, which Durma sells together with a motorized R axis.
More from Durma
Other CNC Press Brakes
