Durma AD-Servo 40600
Key Specifications
bending force
bending length
distance between columns
stroke
daylight
throat depth
How much does the Durma AD-Servo 40600 cost?
Price estimate
We do not have a price for the Durma AD-Servo 40600 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Six hundred ton on a 4,050 mm (159.4 in) bed: the Durma AD-Servo 40600 has the highest force per length of any press brake in Durma's hybrid table. It is built for thick and high-strength plate, and nearly every figure reflects that.
Daylight is 700 mm (27.6 in), more than on any model below 600 ton, with a 365 mm (14.4 in) stroke. Plate of this class is bent over very wide dies with tall, heavy punches, and the opening has to clear both the tooling and the formed part.
The beam is deliberately slow. Rapid and return speed are 80 mm/sec and working speed is 6.5 mm/sec, about half the rapid figure of the AD-Servo 40400. The oil supply grows to 140 x 2 L, while motor power is still listed as 11 x 2 kW. Cycle time on this machine is governed by handling the plate, usually with a crane or the optional sheet follower, so beam speed is rarely the constraint.
Mass and size are in a different class from the rest of the four-metre range: 40,500 kg (89,286 lb), 2,500 mm (98.4 in) wide and 4,000 mm (157.5 in) high. The table stands at 990 mm (39.0 in). Between columns there is 3,400 mm (133.9 in), with a 510 mm (20.1 in) throat. The back gauge keeps 750 mm (29.5 in) of standard X travel, though its R axis is listed at 300 mm/sec.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 600 ton |
| Bending Length | 4,050 mm (159.4 in) |
| Distance Between Columns | 3,400 mm (133.9 in) |
| Stroke | 365 mm (14.4 in) |
| Daylight | 700 mm (27.6 in) |
| Throat Depth | 510 mm (20.1 in) |
| Table Height | 990 mm (39.0 in) |
| Table Width | 154 mm (6.1 in) narrow / 300 mm (11.8 in) wide |
| Y Rapid Speed | 80 mm/sec |
| Y Working Speed | 6.5 mm/sec |
| Y Return Speed | 80 mm/sec |
| Y Axis Precision | 0.01 mm |
| X Axis Working Speed | 500 mm/sec |
| X Axis Precision | 0.05 mm |
| X Axis Travel | 750 mm (29.5 in) standard; 1,000 mm (39.4 in) optional |
| R Axis Working Speed | 300 mm/sec |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Precision | 0.1 mm |
| Z Axis Working Speed | 1,000 mm/sec |
| Z Axis Travel | 2,910 mm (114.6 in) |
| Motor Power | 11 x 2 kW |
| Oil Tank Capacity | 140 x 2 L |
| Machine Length | 5,750 mm (226.4 in) |
| Machine Width | 2,500 mm (98.4 in) |
| Machine Height | 4,000 mm (157.5 in) |
| Machine Weight | 40,500 kg (89,286 lb) |
Specifications sourced from durmazlar.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- 600 ton over 4,050 mm (159.4 in)
- 700 mm (27.6 in) of daylight for tall plate tooling
- 510 mm (20.1 in) throat depth
- Hybrid servo pump drive listed at 11 x 2 kW
- CNC-controlled motorized crowning and SKY 22 control as standard
Limitations
- Rapid and return speed are 80 mm/sec and working speed 6.5 mm/sec
- 40,500 kg (89,286 lb), with a height of 4,000 mm (157.5 in)
- Needs an oil fill of 140 x 2 L
- Only 3,400 mm (133.9 in) between the columns
Best For
Frequently Asked Questions
01
It applies 600 ton over a bending length of 4,050 mm (159.4 in). Stroke is 365 mm (14.4 in), daylight 700 mm (27.6 in), throat depth 510 mm (20.1 in) and the distance between columns 3,400 mm (133.9 in).
02
Its cylinders move far more oil per millimetre of stroke. The table lists 80 mm/sec for rapid and return and 6.5 mm/sec for work, where the AD-Servo 40400 is listed at 150 mm/sec and 9 mm/sec.
03
The machine weighs approximately 40,500 kg (89,286 lb) and measures 5,750 mm (226.4 in) by 2,500 mm (98.4 in) with a height of 4,000 mm (157.5 in). Foundation design and crane clearance should be settled with Durma before ordering.
04
Yes, the AD-Servo 60600 has the same force on a 6,050 mm (238.2 in) bed with 5,100 mm (200.8 in) between columns. The AD-Servo 60600 weighs 52,500 kg (115,741 lb).
