Accurl eB-0825
Key Specifications
bending force
bending length
daylight opening
stroke
throat depth
approach speed
How much does the Accurl eB-0825 cost?
Price estimate
We do not have a price for the Accurl eB-0825 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Accurl eB-0825 is the smallest of Accurl's all-electric press brakes: 25 ton of capacity on a bending length of 800 mm (31.5 in). There is no hydraulic system at all. Accurl states that the ram is driven by a heavy-duty servo motor and a high-performance ball screw, with two screws guided by two servo motors and helical gearboxes.
Small parts are the whole point of this size. With an approach speed of 190 mm/s and a return speed of 190 mm/s it is the only eB model that is listed at 190 mm/s in both directions, and the bending speed is programmable across 0.2-50 mm/s. On a clip or bracket that needs three or four hits, most of the cycle is free travel, so those two figures matter more than tonnage.
The working space is tight and has to be checked against the tooling. Stroke is 100 mm (3.9 in), daylight is 370 mm (14.6 in) and throat depth is 200 mm (7.9 in). Deep boxes and tall return flanges are outside its range; flat brackets, terminals, small covers and electronics hardware are inside it.
Accurl's standard equipment list for the series names a DELEM DA66T control with 2D colour graphics, a BGA-4 backgauge with X, R, Z1 and Z2 axes, a CNC wave crowning system and a Lazersafe LZS-2 block laser guard. Confirm that list for this size, because the catalogue table gives only capacity, geometry and speeds.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 25 ton |
| Bending Length | 800 mm (31.5 in) |
| Daylight Opening | 370 mm (14.6 in) |
| Stroke | 100 mm (3.9 in) |
| Throat Depth | 200 mm (7.9 in) |
| Approach Speed | 190 mm/s |
| Return Speed | 190 mm/s |
| Bending Speed | 0.2-50 mm/s |
Specifications sourced from accurl.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 190 mm/s approach and 190 mm/s return, the fastest pairing in the eB table
- All-electric drive: no hydraulic oil, filter, valves or cylinders, per Accurl
- Bending speed programmable over 0.2-50 mm/s
- DELEM DA66T control and a four-axis BGA-4 backgauge appear in the standard equipment list
Limitations
- Stroke of only 100 mm (3.9 in)
- Throat depth of 200 mm (7.9 in) is the shallowest in the series
- 25 ton over 800 mm (31.5 in) limits it to small, light parts
- The catalogue gives no weight, motor power or dimensions
Best For
Frequently Asked Questions
01
Parts up to 800 mm (31.5 in) long within 25 ton of force. The 100 mm (3.9 in) stroke, 370 mm (14.6 in) daylight and 200 mm (7.9 in) throat depth mean it suits shallow parts with short flanges.
02
No. Accurl describes the eB series as a non-hydraulic bending solution with the ram driven by servo motor and ball screw, and lists no hydraulic oil or hydraulic filter, no valves or cylinders among its advantages.
03
The table shows 190 mm/s for both approach and return and a bending speed range of 0.2-50 mm/s. The next size, the eB-1235, is listed at 180 mm/s in both directions.
04
Accurl's standard equipment for the series is a CNC DELEM DA66T with 2D colour graphics and an ACCURL BGA-4 backgauge for the X, R, Z1 and Z2 axes with X=400mm. Ask whether the full four-axis gauge is fitted on an 800 mm (31.5 in) machine.
More from Accurl
Other CNC Press Brakes
LVD PPEB 500/40
Durma AD-Servo 30320
Yawei PBH(A)-1000/6200
Ermak Power-Bend Falcon 3100-320
Safan Darley E-Brake 50T
