AWEA LP-4025YF
Image: awea.com, AWEA
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
How much does the AWEA LP-4025YF cost?
Price estimate
We do not have a price for the AWEA LP-4025YF that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Three AWEA 5-face bridge machines offer 4,000 mm (157.5 in) of X travel with the 760 mm (29.9 in) Z, and the LP-4025YF is the middle one. It pairs a 4,020 x 2,400 mm (158.3 x 94.5 in) table rated for 15,000 kg (33,069 lb) with 3,200 mm (126.0 in) of Y travel and 2,700 mm (106.3 in) between the columns.
Step down to the LP-4021YF and the table narrows to 4,020 x 2,010 mm (158.3 x 79.1 in), the load to 12,000 kg (26,455 lb) and the Y stroke to 2,400 mm (94.5 in). Step up to the LP-4033YF and the table and load stay as they are here, while Y grows to 3,900 mm (153.5 in) and the columns open to 3,500 mm (137.8 in). So the question between this machine and the larger one is not the table. It is how wide a fixture or part has to pass between the columns, and how far out a horizontal head must reach.
Under the table, AWEA uses a one-piece base with 4 guide ways that is enlarged in proportion to the travel, so the table stays supported at the ends of the stroke. The X-axis ball screw runs down the centre of the axis and carries a vibration absorber. X and Y ride on roller type linear guide ways; Z is a hardened and ground box way.
X rapid traverse is 15,000 mm/min (591 ipm), the same as Y and Z, and the cutting feed range is 1 ~ 10,000 mm/min (0.04 ~ 394 ipm). The machine weighs 41,000 kg (90,388 lb). Its 6,000 rpm BT50 spindle has a 22 / 26 kW (30 / 35 HP) motor, with DIN69871-A as the optional taper.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 4,020 x 2,400 mm (158.3 x 94.5 in) |
| Max Table Load | 15,000 kg (33,069 lb) |
| Distance Spindle Nose to Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 15,000 mm/min (591 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter (full magazine) | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P ≤ 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps ≤ 0.025 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 750 liter (1.5 HP) |
| Machine Weight | 41,000 kg (90,388 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 15,000 kg (33,069 lb) table load on a 4,020 x 2,400 mm (158.3 x 94.5 in) table, against 12,000 kg (26,455 lb) on the LP-4021YF
- All three axes rapid at 15,000 mm/min (591 ipm), with cutting feed up to 10,000 mm/min (394 ipm)
- One-piece base on 4 guide ways and a centre-driven X-axis ball screw with a vibration absorber
- Vertical / horizontal ATC system with 32 tools standard
- 41,000 kg (90,388 lb), lighter than the 44,000 kg (97,002 lb) LP-4033YF that has the same table
Limitations
- 2,700 mm (106.3 in) between the columns; the LP-4033YF opens to 3,500 mm (137.8 in)
- X rapid of 15,000 mm/min (591 ipm) is below the 20,000 mm/min (787 ipm) of the LP-3025YF
- VDI positioning accuracy is P ≤ 0.030 mm over full travel, wider than P ≤ 0.025 mm on the LP-3025YF
- Tools are limited to 350 mm (13.8 in) in length and 20 kg (44 lb)
Best For
Frequently Asked Questions
01
The LP-4021YF has a 4,020 x 2,010 mm (158.3 x 79.1 in) table for 12,000 kg (26,455 lb), 2,400 mm (94.5 in) of Y and weighs 38,000 kg (83,774 lb). The LP-4025YF has a 4,020 x 2,400 mm (158.3 x 94.5 in) table for 15,000 kg (33,069 lb), 3,200 mm (126.0 in) of Y and weighs 41,000 kg (90,388 lb). The LP-4033YF keeps that table and load, with 3,900 mm (153.5 in) of Y and 44,000 kg (97,002 lb) of machine weight.
02
Roller type linear guide ways on X and Y, and a box way on Z that is hardened and precisely ground. AWEA offers roller type linear guide ways on Z as an option when the machine is ordered with a high speed direct drive spindle. The base itself is one piece with 4 guide ways under the table.
03
BT50 tools up to 350 mm (13.8 in) long and 20 kg (44 lb). Maximum diameter is Ø127 mm (Ø5.0 in), or Ø215 mm (Ø8.5 in) when the neighbouring pockets are left empty. The standard ATC holds 32 tools, and 60, 90 or 120 tool systems are optional.
04
Slightly. The LP-4025YF is listed at 41,000 kg (90,388 lb) and the LP-4025 at 40,000 kg (88,183 lb). Table size and the 15,000 kg (33,069 lb) load are the same on both, so the foundation loading is close and the choice comes down to whether the work needs the head changer and the longer Y stroke.
More from AWEA
Other 5-Axis Machining Centers
Hartford 5BC-429
Yasda YMC 430
Makino MAG.A8-H
Quaser UX630
Hartford Aero-1041G
