AWEA HVM-6033Y
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
y axis travel
How much does the AWEA HVM-6033Y cost?
Price estimate
We do not have a price for the AWEA HVM-6033Y that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Y in AWEA HVM-6033Y stands for the axis that sets this machine apart. Y travel is 4,500 mm (177.2 in), the longest cross stroke in the HVM five-face bridge type machining center series, over a table that is only 2,400 mm (94.5 in) wide and columns 3,300 mm (129.9 in) apart. X is 6,000 mm (236.2 in) and Z is 1,000 mm (39.3 in).
So where does the extra stroke go? Not into a bigger table: the 6,020 x 2,400 mm (237.0 x 94.5 in) surface and its 20,000 kg (44,000 lb) rating are carried over from the HVM-6032. Nor does much of it go into the column opening, which the HVM-6032 lists at 3,200 mm (126.0 in). It goes to the sides. With the head able to travel well beyond the part on either flank, a side-facing spindle with a long tool still has room to approach and retract when the workpiece fills the opening.
A wider bridge moves more slowly. Y and Z rapids are 10,000 / 10,000 mm/min (393.7 / 393.7 IPM), and X is 10,000 mm/min (394 ipm) as well, so all three axes traverse at one rate. Cutting feed is 1 ~ 5,000 mm/min (0.04 ~ 196.9 IPM).
The building has to be wider too. AWEA lists 8,150 mm (321 in) of width, 14,875 mm (585 in) of length and a weight of 59,000 kg (129,800 lb). If the parts are longer still, the HVM-7033Y takes X to 7,000 mm (275.6 in) on this bridge.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 6,000 mm (236.2") |
| Y Axis Travel | 4,500 mm (177.2") |
| Z Axis Travel | 1,000 mm (39.3") |
| Table Size | 6,020 x 2,400 mm (237.0" x 94.5") |
| Max Table Load | 20,000 kg (44,000 lb) |
| Distance Between Columns | 3,300 mm (129.9") |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 (7 / 24) |
| Distance Spindle Nose to Table | 200 ~ 1,200 mm (7.9" ~ 47.2") (Standard) 400 ~ 1,400 mm (15.7" ~ 55.1") (Option) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Yz | 10,000 / 10,000 mm/min (393.7 / 393.7 IPM) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 196.9 IPM) |
| Repeatability Jis B 6338 | ± 0.003 mm (± 0.0001") |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm (± 0.0006") full travel |
| Tool Capacity | 60 tools (90, 120 Option) |
| Max Tool Diameter (full magazine) | 127 / 240 mm (5.0" / 9.4") |
| Max Tool Length | 400 mm (15.7") |
| Max Tool Weight | 25 kg (55 lb) |
| Tool Change Time | 80 sec. |
| Machine Length | 14,875 mm (585") |
| Machine Width | 8,150 mm (321") |
| Machine Height | 5,600 mm (220") |
| Machine Weight | 59,000 kg (129,800 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 4,500 mm (177.2 in) of Y travel, against 3,900 mm (153.5 in) on the HVM-6032
- 3,300 mm (129.9 in) between the columns, the widest opening in the HVM series
- 20,000 kg (44,000 lb) table load on a 6,020 x 2,400 mm (237.0 x 94.5 in) table
- X rapid of 10,000 mm/min (394 ipm), faster than the 7,500 mm/min (295.2 IPM) of the HVM-7033Y
- Optional 400 ~ 1,400 mm (15.7 ~ 55.1 in) spindle nose to table distance for tall setups
Limitations
- Y rapid is 10,000 mm/min (393.7 IPM); the HVM-6032 lists 12,000 mm/min for Y
- Table is no larger than on the HVM-6032 despite the longer Y stroke
- 8,150 mm (321 in) wide and 59,000 kg (129,800 lb)
- Cutting feed limited to 5,000 mm/min (196.9 IPM)
Best For
Frequently Asked Questions
01
The two Y-suffix models have 4,500 mm (177.2 in) of Y travel and 3,300 mm (129.9 in) between the columns. The HVM-6032, which has an identical table, has 3,900 mm (153.5 in) of Y and 3,200 mm (126.0 in) between the columns. AWEA's specification page does not explain the suffix in words; the figures show a longer cross stroke on a slightly wider bridge.
02
No. Both tables are 6,020 x 2,400 mm (237.0 x 94.5 in) and both are rated at 20,000 kg (44,000 lb). The difference is in the travel around the table, not in the table.
03
X rapid is 10,000 mm/min (394 ipm). Y and Z rapids are 10,000 / 10,000 mm/min (393.7 / 393.7 IPM). Cutting feed runs from 1 to 5,000 mm/min (0.04 ~ 196.9 IPM).
04
8,150 mm (321 in) wide, 14,875 mm (585 in) long and 5,600 mm (220 in) high, at 59,000 kg (129,800 lb). The HVM-6032 is listed at the same length and height and at 57,000 kg (125,400 lb).
05
BT 50 (7 / 24) tooling. The magazine has 60 positions, or 90 or 120 as options, and accepts tools up to 400 mm (15.7 in) long and 25 kg (55 lb). Changing a tool takes 80 sec.
