AWEA MEGA5 G6047
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
x axis travel
y axis travel
How much does the AWEA MEGA5 G6047 cost?
Price estimate
We do not have a price for the AWEA MEGA5 G6047 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The AWEA MEGA5 G6047 opens the wide frame of the MEGA5 G series. Its gantry spans 5,800 mm (228.3 in) between columns and gives 4,700 mm (185.0 in) of Y travel, paired with 6,000 mm (236.2 in) of X and 1,200 mm (47.2 in) of Z. No shorter machine is offered at this width.
Compare it with the MEGA5 G6037, which has the same X travel on the 3,700 mm (145.7 in) frame. The MEGA5 G6037 table is 6,000 x 3,800 mm (236.2 x 149.6 in); this one is 6,000 x 4,800 mm (236.2 x 189.0 in). The longer cross rail and its bases add a great deal of iron: 119,500 kg (263,448 lb) against 84,500 kg (186,287 lb) for the MEGA5 G6037. Y rapid is 12 m / min where the MEGA5 G6037 reaches 15 m / min, and the coolant tank holds 1,900 liter against 1,600 liter on the MEGA5 G6037. Accuracy does not suffer. Both list P = 0.035 mm over full travel and Ps = 0.026 mm under VDI, since those figures track the X length.
So the G6047 is for parts that are wide, not long: press frames, large ring segments, hull and nacelle moulds, anything whose second dimension is beyond the narrow frame. Maximum workpiece width equals the Y travel, and height is limited to 1,050 mm (41.3 in).
The Y axis rides on roller type linear guide ways, and the Z axis is a box structure headstock on linear guide ways. The spindle listed is HSK-A100 at 12,000 rpm with 40 / 50 kW (53.6 / 67.1 hp).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 4,700 mm (185.0 in) |
| Z Axis Travel | 1,200 mm (47.2 in) (opt. 1,400 mm) |
| Table Size | 6,000 x 4,800 mm (236.2 x 189.0 in) |
| Max Table Load | 2,500 kg / m² |
| Distance Between Columns | 5,800 mm (228.3 in) |
| Distance Spindle Nose to Table | TCH-30F = 200 ~ 1,400 mm (opt. 200 ~ 1,600 mm) TCH-20F = 355 ~ 1,555 mm (opt. 355 ~ 1,755 mm) |
| Distance 90 Deg Spindle Center to Table | TCH-30F = 550 ~ 1,750 (opt. 550 ~ 1,950 mm) TCH-20F = 665 ~ 1,865 mm (opt. 665 ~ 2,065 mm) |
| T-Slots | 28 x 200 mm |
| Spindle Taper | HSK-A100 |
| Spindle Power S1 S6 40 | 40 / 50 kW (53.6 / 67.1 hp) |
| Max Spindle Speed | 12,000 rpm |
| Rapid Traverse X | 20 m / min |
| Rapid Traverse Y | 12 m / min |
| Rapid Traverse Z | 10 m / min |
| Cutting Feed Rate | 10 m / min |
| Tool Capacity | 20 T |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Max Tool Diameter (full magazine) | Ø160 / Ø230 mm (Ø6.3 / Ø9.1 in) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P = 0.035 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps = 0.026 mm |
| Coolant Tank Capacity | 1,900 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 150 liter |
| Air Pressure Requirement | 6 ~ 8 kg/cm² |
| Machine Weight | 119,500 kg (263,448 lb) |
| Max Workpiece Length | 6,000 mm (236.2 in) |
| Max Workpiece Width | 4,700 mm (185.0 in) |
| Max Workpiece Height | 1,050 mm (41.3 in) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 4,700 mm (185.0 in) of Y travel and 5,800 mm (228.3 in) between columns
- 6,000 x 4,800 mm (236.2 x 189.0 in) table rated at 2,500 kg/m²
- Same VDI accuracy as the narrower MEGA5 G6037: P = 0.035 mm, Ps = 0.026 mm
- 1,900 liter coolant tank, larger than the 1,600 liter tank of the MEGA5 G6037
- Roller type linear guide ways on Y and a box structure headstock on Z
Limitations
- Y rapid is 12 m / min, down from 15 m / min on the MEGA5 G6037
- 119,500 kg (263,448 lb), much heavier than the 84,500 kg (186,287 lb) MEGA5 G6037
- Workpiece height is limited to 1,050 mm (41.3 in) however wide the part is
- 6,000 mm (236.2 in) is the shortest X travel offered on the wide frame
Best For
Frequently Asked Questions
01
Against the MEGA5 G6037 it adds Y travel, 4,700 mm (185.0 in) in place of 3,700 mm (145.7 in), and a 6,000 x 4,800 mm (236.2 x 189.0 in) table. The distance between columns becomes 5,800 mm (228.3 in). In return the Y rapid is 12 m / min, where the MEGA5 G6037 lists 15 m / min, and the weight rises to 119,500 kg (263,448 lb). The coolant tank is 1,900 liter.
02
AWEA lists a maximum workpiece of 6,000 mm (236.2 in) in length, 4,700 mm (185.0 in) in width and 1,050 mm (41.3 in) in height. The columns stand 5,800 mm (228.3 in) apart, so the part has to pass between them when it is loaded onto the fixed table.
03
Not by the listed figures. The G6047 and the MEGA5 G6037 both show P = 0.035 mm over full travel and Ps = 0.026 mm under VDI, and ± 0.010 mm over full travel with ± 0.003 mm repeatability under JIS. The gantry is driven in X by a rack and pinion system with dual servo motors and dual linear scales.
04
The table lists an air pressure requirement of 6 ~ 8 kg/cm², a 1,900 liter coolant tank, a 150 liter hydraulic tank and a 6 liter lubrication tank. Machine weight is 119,500 kg (263,448 lb), which the foundation has to carry along with the workpiece.
More from AWEA
Other 5-Axis Machining Centers
Zimmermann FZU27
Johnford SDMC-11000x3200x1400-2H-TU35
Jingdiao JDGR200T
Hyundai WIA XF2000i
FANUC RoboNano a-0iB
