AWEA HVM-7033Y
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
y axis travel
How much does the AWEA HVM-7033Y cost?
Price estimate
We do not have a price for the AWEA HVM-7033Y that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
At 7,000 mm (275.6 in) of X travel, the AWEA HVM-7033Y is the longest five-face bridge type machining center in the HVM series. It sits on the wide Y bridge, with 4,500 mm (177.2 in) of Y travel and 3,300 mm (129.9 in) between the columns, and has the 1,000 mm (39.3 in) Z stroke common to the range.
Before anything else, check the table. AWEA's specification lists it as 6,020 x 2,400 mm (237.0 x 94.5 in), identical to the HVM-6033Y and shorter than this model's own X travel. On every other HVM the table is slightly longer than the X stroke. Either this model runs the shorter table through a longer stroke, or the printed row was carried over from the smaller machine. A buyer with a part near 7,000 mm needs that answered in writing.
The slowest long axis in the series comes with the length. X rapid is 7,500 mm/min (295.2 IPM), against 10,000 mm/min on the HVM-6033Y. Y and Z rapids are 10,000 / 10,000 mm/min (393.7 / 393.7 IPM), and cutting feed is 1 ~ 5,000 mm/min (0.04 ~ 196.9 IPM). Table load is 20,000 kg (44,000 lb).
The installation is 15,585 mm (613 in) long, 8,150 mm (321 in) wide and 5,600 mm (220 in) high. This page's table has no weight row for the model. For scale, the HVM-6033Y is listed at 59,000 kg (129,800 lb).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 7,000 mm (275.6") |
| Y Axis Travel | 4,500 mm (177.2") |
| Z Axis Travel | 1,000 mm (39.3") |
| Table Size | 6,020 x 2,400 mm (237.0" x 94.5") |
| Max Table Load | 20,000 kg (44,000 lb) |
| Distance Between Columns | 3,300 mm (129.9") |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 (7 / 24) |
| Distance Spindle Nose to Table | 200 ~ 1,200 mm (7.9" ~ 47.2") (Standard) 400 ~ 1,400 mm (15.7" ~ 55.1") (Option) |
| Rapid Traverse X | 7,500 mm/min (295.2 IPM) |
| Rapid Traverse Yz | 10,000 / 10,000 mm/min (393.7 / 393.7 IPM) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 196.9 IPM) |
| Repeatability Jis B 6338 | ± 0.003 mm (± 0.0001") |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm (± 0.0006") full travel |
| Tool Capacity | 60 tools (90, 120 Option) |
| Max Tool Diameter (full magazine) | 127 / 240 mm (5.0" / 9.4") |
| Max Tool Length | 400 mm (15.7") |
| Max Tool Weight | 25 kg (55 lb) |
| Tool Change Time | 80 sec. |
| Machine Length | 15,585 mm (613") |
| Machine Width | 8,150 mm (321") |
| Machine Height | 5,600 mm (220") |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 7,000 mm (275.6 in) of X travel, the longest in the HVM series
- 4,500 mm (177.2 in) of Y travel with 3,300 mm (129.9 in) between the columns
- 20,000 kg (44,000 lb) table load
- Repeatability of ± 0.003 mm (± 0.0001 in) is stated even at this length
- Takes 90 or 120 tools as magazine options over the standard 60
Limitations
- X rapid of 7,500 mm/min (295.2 IPM) is the lowest in the series
- Table is listed at 6,020 x 2,400 mm (237.0 x 94.5 in), shorter than the X travel; confirm the real table length
- No machine weight is given in this page's table
- 15,585 mm (613 in) of length and 8,150 mm (321 in) of width to house
- Cutting feed limited to 5,000 mm/min (196.9 IPM)
Best For
Frequently Asked Questions
01
That is what AWEA's specification page shows: 7,000 mm (275.6 in) of X travel and a 6,020 x 2,400 mm (237.0 x 94.5 in) table. The HVM-6033Y has the same table with 6,000 mm (236.2 in) of X travel. The page offers no explanation, so ask AWEA for the table length before planning a fixture.
02
X travel is 7,000 mm (275.6 in) where the HVM-6033Y has 6,000 mm (236.2 in), and X rapid is 7,500 mm/min (295.2 IPM) where the HVM-6033Y has 10,000 mm/min (394 ipm). Length grows to 15,585 mm (613 in) from the 14,875 mm (585 in) of the HVM-6033Y. Y and Z travel, column spacing, table load, spindle and magazine are listed identically.
03
The spec table on this page does not carry a weight for the HVM-7033Y. The shorter HVM-6033Y is listed at 59,000 kg (129,800 lb), which gives the order of size. Get the figure from AWEA for foundation and transport planning.
04
A BT 50 (7 / 24) spindle with a 22 / 26 kW (30 / 35 HP) motor. Standard distance from spindle nose to table is 200 ~ 1,200 mm (7.9 ~ 47.2 in); 400 ~ 1,400 mm (15.7 ~ 55.1 in) is optional. Maximum tool diameter is 127 / 240 mm (5.0 / 9.4 in).
More from AWEA
Other 5-Axis Machining Centers
Hermle C 12
Alzmetall GS 600/5-T
DMG Mori DMU 600 Gantry linear
Makino D200Z
Huron MX 20 MT
