AWEA LP-4021YZF
Image: awea.com, AWEA
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
How much does the AWEA LP-4021YZF cost?
Price estimate
We do not have a price for the AWEA LP-4021YZF that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
How tall a part fits under the AWEA LP-4021YZF? The spindle nose stands 200 ~ 1,200 mm (7.9 ~ 47.2 in) above the table and Z travels 1,000 mm (39.4 in). That headroom is the reason to pick this model over the LP-4021YF, which offers 200 ~ 960 mm (7.9 ~ 37.8 in) and 760 mm (29.9 in) of Z on the same table.
Headroom matters twice on a 5-face machine. A tall part needs it, and so does a short part once a horizontal head hangs below the ram and has to come down beside the work. With 2,800 mm (110.2 in) of Y travel over a table 2,010 mm wide, the head also has stroke left to step outside the part on either side.
A longer Z stroke puts more demand on the head and its guides. AWEA uses a hardened and ground box way on Z, and places the main spindle, the motor, the ball screw and the hydraulic counter weight cylinders symmetrically in the head. The Y-axis guide ways are offset from each other, which the maker says shortens the distance from spindle to cross beam.
The working area is a 4,020 x 2,010 mm (158.3 x 79.1 in) table for 12,000 kg (26,455 lb), with 4,000 mm (157.5 in) of X and 2,300 mm (90.6 in) between columns. All three axes rapid at 15,000 mm/min (591 ipm). A 4,000 rpm spindle on a 22 / 26 kW (30 / 35 HP) motor is standard, and the machine weighs 38,000 kg (83,774 lb).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 2,800 mm (110.2 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 4,020 x 2,010 mm (158.3 x 79.1 in) |
| Max Table Load | 12,000 kg (26,455 lb) |
| Distance Spindle Nose to Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns | 2,300 mm (90.6 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 4,000 rpm (Std.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 15,000 mm/min (591 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter (full magazine) | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P ≤ 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps ≤ 0.025 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 650 liter (1.5 HP) |
| Machine Weight | 38,000 kg (83,774 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 200 ~ 1,200 mm (7.9 ~ 47.2 in) from spindle nose to table, with 1,000 mm (39.4 in) of Z travel
- 2,800 mm (110.2 in) of Y, more than the 2,400 mm (94.5 in) of the LP-4021YF
- Hardened and ground box way on Z, with hydraulic counter weight cylinders placed symmetrically in the head
- Offset Y-axis roller guide ways that shorten the distance from spindle to cross beam
- 12,000 kg (26,455 lb) on a 4,020 x 2,010 mm (158.3 x 79.1 in) table
Limitations
- Column spacing is 2,300 mm (90.6 in); the LP-4025YZF opens to 2,700 mm (106.3 in)
- Standard spindle speed is 4,000 rpm, lower than the 6,000 rpm of the LP-4021YF
- X rapid of 15,000 mm/min (591 ipm), against 20,000 mm/min (787 ipm) on the LP-3021YZF
- Tool length is limited to 350 mm (13.8 in), which caps how deep a single tool reaches into a tall part
Best For
Frequently Asked Questions
01
The distance from spindle nose to table is 200 ~ 1,200 mm (7.9 ~ 47.2 in), covered by 1,000 mm (39.4 in) of Z travel. Remember that fixtures, a horizontal head and the tool itself all come out of that figure; the longest tool the magazine accepts is 350 mm (13.8 in).
02
Choose by part height and spindle. The LP-4021YF has 760 mm (29.9 in) of Z, 2,400 mm (94.5 in) of Y and a 6,000 rpm spindle. The LP-4021YZF has 1,000 mm (39.4 in) of Z, 2,800 mm (110.2 in) of Y and a 4,000 rpm standard spindle with built-in 6,000 / 8,000 rpm units among its options. Table, load and weight are the same.
03
The LP-4016YZF is the narrower one, with 1,900 mm (74.8 in) of Y, 1,700 mm (66.9 in) between columns and a weight of 33,000 kg (72,751 lb). The LP-4025YZF is the wider one, with 3,200 mm (126.0 in) of Y, 2,700 mm (106.3 in) between columns, a 15,000 kg (33,069 lb) load and a weight of 44,000 kg (97,002 lb).
04
The maker points to three things: a high rigidity box way on Z that is hardened and precisely ground, a head in which the main spindle, spindle motor, ball screw and hydraulic counter weight cylinders are symmetrically placed, and Y-axis roller type linear guide ways offset from each other to reduce the distance between spindle and cross beam.
05
P ≤ 0.030 mm over full travel with Ps ≤ 0.025 mm repeatability under VDI. Under JIS the table gives ± 0.015 mm over full travel and ± 0.003 mm repeatability.
More from AWEA
Other 5-Axis Machining Centers
Hartford 5A-95Q
HNK HPM-20M (20x60)
Makino MAG.A12/A20H
Quaser UX600C
Hartford Aero-1036G
