Amada HRB 1303
Image: amada.com, Amada
Key Specifications
press capacity
open height
stroke
approach speed
bending speed
return speed
How much does the Amada HRB 1303 cost?
Estimated price range
Our best estimate for a cnc press brake in this class — not a quote from Amada. Configuration moves it a long way.
Overview
Amada's HRB 1303 sits in the middle of three HRB press brakes that share one table: 1300 kN of press capacity, between the 1000 kN HRB 1003 and the 2200 kN HRB 2204. Open height is 520 mm and the stroke 250 mm, as on both of those machines.
Its ram figures follow the larger model, not the smaller one. Approach and return are both 100 mm/sec and bending is 10 mm/sec, the same as the HRB 2204, while the HRB 1003 approaches at 200 mm/sec. A buyer stepping up in force for thicker material therefore gives up ram speed as well, and should weigh how much of the work really exceeds the HRB 1003 at 1000 kN.
Footprint barely changes with the step up. The HRB 1303 is 4895 mm long and 3200 mm wide, the widest of the three, and stands 2835 mm high. No bending length, frame spacing or weight appears in Amada's table for this size, so those have to come from the quotation drawings.
Full Specifications
| Parameter | Value |
|---|---|
| Press Capacity | 1300 kN |
| Open Height | 520 mm |
| Stroke | 250 mm |
| Approach Speed | 100 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 100 mm/sec |
| Machine Length | 4895 mm |
| Machine Width | 3200 mm |
| Machine Height | 2835 mm |
Specifications sourced from amada.eu — verified 2026-10-03
Strengths & Limitations
Strengths
- 1300 kN press capacity, above the 1000 kN of the HRB 1003, in nearly the same 4895 mm length
- 250 mm stroke and 520 mm open height for tall tooling
- Height of 2835 mm, lower than the 3120 mm HRB 2204
Limitations
- Approach speed is 100 mm/sec, half the 200 mm/sec of the HRB 1003
- Bending speed of 10 mm/sec against 15 mm/sec on the HRB 1003
- Bending length, distance between frames and weight are not given in the table for this model
Best For
Frequently Asked Questions
01
Yes, on every ram figure. The HRB 1303 is listed at 100 mm/sec approach, 10 mm/sec bending and 100 mm/sec return. The HRB 1003 is listed at 200 mm/sec, 15 mm/sec and 150 mm/sec. In exchange the HRB 1303 has 1300 kN of press capacity against 1000 kN for the HRB 1003.
02
4895 mm long, 3200 mm wide and 2835 mm high. Amada's table does not list the machine weight for this model, so the rigging and floor-loading checks need the figure from the installation drawing.
03
When force is the limit. The HRB 2204 is rated 2200 kN with the same 100 mm/sec approach, 10 mm/sec bending speed, 250 mm stroke and 520 mm open height, so nothing is lost in ram speed or clearance. The HRB 2204 is a larger machine at 6050 mm long and 3120 mm high, against 4895 mm and 2835 mm for the HRB 1303.
Videos
AMADA MIDDLE EAST FZCO
Amada UK LTD
