Weingärtner mpmc 2800 L
Key Specifications
swing over bed and slide
max workpiece weight
spindle nose
tool interface
b axis range
x axis travel
How much does the Weingärtner mpmc 2800 L cost?
Price estimate
We do not have a price for the Weingärtner mpmc 2800 L that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
At 2,800 mm (110.2 in) of swing over bed and slide, the Weingärtner mpmc 2800 L is the largest machine in the mpmc table. Anything bigger is a special: the maker notes that larger workpiece dimensions can be accommodated on request.
The biggest swing does not carry the biggest load. Weight between chuck and tailstock is listed at 16,000 / 30,000 kg (35,273 / 66,138 lb), and the 60,000 kg (132,275 lb) class stays with the mpmc 2000 L/S and the mpmc 1400 S. Think of this model as the one for very large diameters at moderate weight, such as rolls and large rotors, more than for the densest forgings.
Its Y axis is the most lopsided in the range. The row reads -1,200 / +400 mm (-47.2 / +15.7 in), so the horizontal slide runs far across the workpiece axis on the minus side and only a short way on the plus side. X is listed as 1,500 / 1,800 / 2,200 mm (59.1 / 70.9 / 86.6 in), with 1,350 / 1,650 / 2,050 mm (53.1 / 65.0 / 80.7 in) above the workpiece center and 150 mm (5.9 in) below. Rapids are 20 m/min (787 ipm) on X and Y and 30 m/min (1,181 ipm) on Z.
Spindle nose and tooling match the other large models: A20 or A28 to DIN 55026, and C10 or HSK125 on a ±110° B axis. For getting parts of this size in and out, Weingärtner describes a soft-landing system with prismatic support pads and names work rollers as an example. Turning length and spindle power are not in the table. SINUMERIK ONE is the control.
Full Specifications
| Parameter | Value |
|---|---|
| Swing Over Bed and Slide | 2,800 mm (110.2 in) |
| Max Workpiece Weight | 16,000 / 30,000 kg (35,273 / 66,138 lb) between chuck and tailstock |
| Spindle Nose | A20 / A28 (DIN 55026) |
| Tool Interface | C10/HSK125 |
| B Axis Range | ±110° |
| X Axis Travel | 1,500 / 1,800 / 2,200 mm (59.1 / 70.9 / 86.6 in) |
| X Axis Travel Above Workpiece Center | 1,350 / 1,650 / 2,050 mm (53.1 / 65.0 / 80.7 in) |
| X Axis Travel Below Workpiece Center | 150 mm (5.9 in) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Y Axis Travel | -1,200 / +400 mm (-47.2 / +15.7 in) |
| Rapid Traverse Y | 20 m/min (787 ipm) |
| Rapid Traverse Z | 30 m/min (1,181 ipm) |
| CNC Control | SINUMERIK ONE |
Specifications sourced from weingartner.com — verified 2026-10-05
Strengths & Limitations
Strengths
- Largest swing in the table: 2,800 mm (110.2 in) over bed and slide
- Y reaches 1,200 mm (47.2 in) to the minus side of the workpiece axis
- X travel up to 2,200 mm (86.6 in), with up to 2,050 mm (80.7 in) above the workpiece center
- C10 or HSK125 tool interface and an A20 or A28 spindle nose
- Soft-landing system with prismatic support pads for loading large, heavy workpieces
Limitations
- Weight ends at 30,000 kg (66,138 lb); the smaller mpmc 2000 L/S is listed up to 60,000 kg (132,275 lb)
- Y travel to the plus side is only 400 mm (15.7 in)
- Rapids are the slowest of the range at 20 m/min (787 ipm) on X and Y
- Neither spindle power nor turning length is given in the maker's table
Best For
Frequently Asked Questions
01
Swing over bed and slide is 2,800 mm (110.2 in), the largest in the table, and weight between chuck and tailstock is 16,000 / 30,000 kg (35,273 / 66,138 lb). Turning length is not listed because Weingärtner builds the bed to the order. The maker adds that special sizes and weights are available on request.
02
The table does not give a reason. It lists the mpmc 2000 L/S at 16,000 / 30,000 / 60,000 kg (35,273 / 66,138 / 132,275 lb) and this model at 16,000 / 30,000 kg, on the same A20 or A28 spindle noses. If a part needs both the 2,800 mm swing and more than 30,000 kg (66,138 lb), raise it with Weingärtner as a special weight.
03
The horizontal slide moves 1,200 mm (47.2 in) past the workpiece axis on the minus side and 400 mm (15.7 in) on the plus side. Features far off-center can therefore be milled or drilled from one side of a very wide part. The Y rapid is 20 m/min (787 ipm).
04
The tool spindle has a C10 or HSK125 interface and swivels ±110° on the B axis, which Weingärtner clamps hydromechanically at any angle. Interchangeable machining heads are stored in a pick-up station and changed automatically. Boring bars and other long or heavy tools have storage stations above the headstock or behind the tailstock, up to four at each location depending on machine size.
More from Weingärtner
Other Mill-Turn / Multi-Tasking Machines
Mazak INTEGREX i-100 NEO
Mazak INTEGREX i-250H
Geminis GM9i
Mazak INTEGREX e-RAMTEC
Huron MTX 100
