Weingärtner mpmc 1400 S
Key Specifications
swing over bed and slide
max workpiece weight
spindle nose
tool interface
b axis range
x axis travel
How much does the Weingärtner mpmc 1400 S cost?
Price estimate
We do not have a price for the Weingärtner mpmc 1400 S that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
With the Weingärtner mpmc 1400 S the range changes hardware. The tool interface moves to C10 or HSK125, the spindle nose to A20 or A28 (DIN 55026), and the weight between chuck and tailstock is listed at 16,000 / 30,000 / 60,000 kg (35,273 / 66,138 / 132,275 lb). Swing over bed and slide is 1,400 mm (55.1 in).
That top figure is the ceiling of the whole series, which Weingärtner describes as built for workpieces weighing up to 60 tons. The mpmc 1300 L/S, at 1,300 mm (51.2 in) of swing, stops at 30,000 kg (66,138 lb) and keeps the smaller C6/C8/HSK100 interface. Choosing between the two is therefore less about diameter than about how heavy the part is and how large a cutter it needs.
The slides grow to match. X travel is 1,500 / 1,800 / 2,200 mm (59.1 / 70.9 / 86.6 in), of which 150 mm (5.9 in) is below the workpiece center, and Y is an even -500 / +500 mm (-19.7 / +19.7 in) with no bracketed extra. Mass slows the axes. Rapid feed is 20 m/min (787 ipm) on X and Y and 30 m/min (1,181 ipm) on Z, the lowest rates in the table.
Crankshafts and gas and steam turbine shafts are among the workpieces the maker names for the mpmc, and this is the smallest model with the ratings for the heavy ones. Storage stations for boring bars and other long tools sit above the headstock or behind the tailstock, and a separate heavy-duty tool magazine is available when many heavy special tools are needed. As elsewhere in the range, the table is silent on spindle power and turning length. The control is SINUMERIK ONE.
Full Specifications
| Parameter | Value |
|---|---|
| Swing Over Bed and Slide | 1,400 mm (55.1 in) |
| Max Workpiece Weight | 16,000 / 30,000 / 60,000 kg (35,273 / 66,138 / 132,275 lb) between chuck and tailstock |
| Spindle Nose | A20 / A28 (DIN 55026) |
| Tool Interface | C10/HSK125 |
| B Axis Range | ±110° |
| X Axis Travel | 1,500 / 1,800 / 2,200 mm (59.1 / 70.9 / 86.6 in) |
| X Axis Travel Above Workpiece Center | 1,350 / 1,650 / 2,050 mm (53.1 / 65.0 / 80.7 in) |
| X Axis Travel Below Workpiece Center | 150 mm (5.9 in) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Y Axis Travel | -500 / +500 mm (-19.7 / +19.7 in) |
| Rapid Traverse Y | 20 m/min (787 ipm) |
| Rapid Traverse Z | 30 m/min (1,181 ipm) |
| CNC Control | SINUMERIK ONE |
Specifications sourced from weingartner.com — verified 2026-10-05
Strengths & Limitations
Strengths
- Listed up to 60,000 kg (132,275 lb) between chuck and tailstock, the top rating of the range
- C10 or HSK125 tool interface for larger cutters than the C6/C8/HSK100 models take
- A20 or A28 spindle nose to DIN 55026
- X travel of up to 2,200 mm (86.6 in), with 150 mm (5.9 in) below the workpiece center
- Storage stations for boring bars above the headstock or behind the tailstock, plus an available heavy-duty tool magazine
Limitations
- Slowest rapids in the table: 20 m/min (787 ipm) on X and Y, 30 m/min (1,181 ipm) on Z
- Swing of 1,400 mm (55.1 in) is the smallest of the three C10/HSK125 models; the mpmc 2000 L/S offers 2,000 mm (78.7 in)
- Y stroke is 500 mm (19.7 in) per side, against 800 mm (31.5 in) on the mpmc 2000 L/S
- Spindle power, torque and speed are not published in the table
Best For
Frequently Asked Questions
01
Nearly every row except the swivel range and the control. The mpmc 1300 L/S is listed with C6/C8/HSK100 tooling, an A15 or A20 nose, weights up to 30,000 kg (66,138 lb) and X travel up to 1,500 mm (59.1 in). This model has C10 or HSK125, A20 or A28, weights up to 60,000 kg (132,275 lb) and X travel up to 2,200 mm (86.6 in), at lower rapid rates.
02
The table lists three figures for the weight between chuck and tailstock: 16,000, 30,000 and 60,000 kg (35,273, 66,138 and 132,275 lb). It does not say what separates the three, and a footnote in the maker's brochure adds that special sizes and weights are available on request. For loading, Weingärtner describes a soft-landing system with prismatic support pads.
03
20 m/min (787 ipm) on the vertical X slide and the horizontal Y slide, and 30 m/min (1,181 ipm) on the longitudinal Z slide. Z is driven by a rack and pinion with master and slave motors, so the drive does not depend on a long ball screw.
04
Weingärtner lists crankshafts among the workpieces the mpmc handles, and this model's 60,000 kg (132,275 lb) rating and 1,400 mm (55.1 in) swing set the size limit. The steady rest offered for heavy workpieces has CNC-controlled support movements. Check the throw of the crankshaft against the swing and the Y stroke of 500 mm (19.7 in) per side.
More from Weingärtner
Other Mill-Turn / Multi-Tasking Machines
Emco HyperTurn 65
Tsugami TMA8F
Okuma Multus B250II
Mazak INTEGREX i-100S
Spinner TTS52
