Weingärtner mpmc 2000 L/S
Key Specifications
swing over bed and slide
max workpiece weight
spindle nose
tool interface
b axis range
x axis travel
How much does the Weingärtner mpmc 2000 L/S cost?
Price estimate
We do not have a price for the Weingärtner mpmc 2000 L/S that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Weingärtner mpmc 2000 L/S pairs the top weight rating of the range with its widest even Y stroke. It swings 2,000 mm (78.7 in) over bed and slide, is listed at 16,000 / 30,000 / 60,000 kg (35,273 / 66,138 / 132,275 lb) between chuck and tailstock, and moves its horizontal slide -800 / +800 mm (-31.5 / +31.5 in).
That Y figure is the reason to pick this model. A tool can work 800 mm to either side of the workpiece axis, so slots, pockets and flats spread around a wide rotor body are reachable from both sides in one clamping. The mpmc 1400 S, with the same weight classes, has -500 / +500 mm. The mpmc 2800 L has more swing but an uneven -1,200 / +400 mm stroke.
Vertical travel is shared with those two machines. X is listed as 1,500 / 1,800 / 2,200 mm (59.1 / 70.9 / 86.6 in), which breaks down into 1,350 / 1,650 / 2,050 mm (53.1 / 65.0 / 80.7 in) above the workpiece center and 150 mm (5.9 in) below it. Rapid feed is 20 m/min (787 ipm) on X and Y and 30 m/min (1,181 ipm) on Z.
Tooling is C10 or HSK125 on a B axis with ±110° of swivel, and the spindle nose is A20 or A28 to DIN 55026. Weingärtner lists turbo-generator shafts and gas and steam turbine shafts among the mpmc's workpieces, and names roller burnishing, deep rolling, broaching, polishing and grinding as further technologies available on the machine. Spindle power and turning length are not in the table. SINUMERIK ONE is the control.
Full Specifications
| Parameter | Value |
|---|---|
| Swing Over Bed and Slide | 2,000 mm (78.7 in) |
| Max Workpiece Weight | 16,000 / 30,000 / 60,000 kg (35,273 / 66,138 / 132,275 lb) between chuck and tailstock |
| Spindle Nose | A20 / A28 (DIN 55026) |
| Tool Interface | C10/HSK125 |
| B Axis Range | ±110° |
| X Axis Travel | 1,500 / 1,800 / 2,200 mm (59.1 / 70.9 / 86.6 in) |
| X Axis Travel Above Workpiece Center | 1,350 / 1,650 / 2,050 mm (53.1 / 65.0 / 80.7 in) |
| X Axis Travel Below Workpiece Center | 150 mm (5.9 in) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Y Axis Travel | -800 / +800 mm (-31.5 / +31.5 in) |
| Rapid Traverse Y | 20 m/min (787 ipm) |
| Rapid Traverse Z | 30 m/min (1,181 ipm) |
| CNC Control | SINUMERIK ONE |
Specifications sourced from weingartner.com — verified 2026-10-05
Strengths & Limitations
Strengths
- Even Y stroke of 800 mm (31.5 in) to each side of the workpiece axis, the widest symmetric travel in the table
- Rated up to 60,000 kg (132,275 lb) between chuck and tailstock
- 2,000 mm (78.7 in) of swing over bed and slide
- X travel up to 2,200 mm (86.6 in), of which up to 2,050 mm (80.7 in) is above the workpiece center
- Roller burnishing, deep rolling, broaching, polishing and grinding are listed as additional technologies
Limitations
- Rapids of 20 m/min (787 ipm) on X and Y are the lowest in the range
- Z rapid is 30 m/min (1,181 ipm), against 40 m/min (1,575 ipm) on the mpmc 1800 L
- Only C10 or HSK125 tooling is listed, so tools from a C6/C8/HSK100 machine do not carry over
- The table states no spindle power, torque, speed or turning length
Best For
Frequently Asked Questions
01
The horizontal slide travels -800 / +800 mm (-31.5 / +31.5 in), with a rapid feed of 20 m/min (787 ipm). No other column of the table has an even stroke this long. The mpmc 1400 S, the next-smaller model with the same tool interface, is listed at -500 / +500 mm.
02
It depends on diameter and weight. The mpmc 2800 L swings 2,800 mm (110.2 in) but is listed at 16,000 / 30,000 kg (35,273 / 66,138 lb), without a 60,000 kg class, and its Y stroke is uneven. This model stops at 2,000 mm (78.7 in) of swing, carries up to 60,000 kg (132,275 lb) and has equal Y travel on both sides.
03
The main spindle nose is A20 or A28 to DIN 55026 and the tool spindle interface is C10 or HSK125. The headstock is driven by two AC main spindle motors with an automatic switching gearbox, according to Weingärtner, and hydraulically actuated power chucks hold the work. Ratings for those motors are not in the table.
04
The table has no turning length for any model. Weingärtner says dimensions and lengths are tailored to individual customer requirements, and gives turning lengths of up to 17 meters and weights of up to 60 tons for the mpmc series as a whole. The length of a particular machine is fixed in the order.
More from Weingärtner
Other Mill-Turn / Multi-Tasking Machines
Tsugami TMA8J
Mazak INTEGREX i-250H S
Spinner TTS85
Geminis GM7i
Ganesh GEN TURN 52-BY2
