Vision Wide SF-4133
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way
z axis travel linear way
max table load
How much does the Vision Wide SF-4133 cost?
Price estimate
We do not have a price for the Vision Wide SF-4133 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
With a 4,300×2,100 mm (169.3×82.7 in) table for 16,000 kg (35,273 lb), 4,100 mm (161.4 in) of X travel and 2,600 mm (102.4 in) of Y, the Vision Wide SF-4133 is the mid-length model of the widest floor-standing changer group.
Setting one up takes more decisions than its short specification table suggests. The buyer chooses a head, box way or linear way. Then a spindle: geared at 6,000 rpm or 4,000 rpm, belt-driven at 8,000/ 10,000rpm, or direct-driven at 10,000 rpm or 12,000 rpm. Then a Z stroke, a tool changer type and its capacity, and a coolant package. Vision Wide's table marks most of these Opt., and the few that are not are the baseline: 6,000 rpm geared spindle, 800 mm of Z, a 32 tool floor-standing changer and 18.5/22 kW (24.8/29.5 hp).
So two SF-4133 machines can be quite different tools. One built for press dies and one built for aerospace tooling plates would share the castings and little else above them.
Fixed in every build are the feeds: 1-10,000 mm/min for cutting, 20 m/min rapid in X and Y, 15 m/min in Z. The printed Y travel equals that of the SF-4126 and should be confirmed.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 4,100 mm (161.4 in) |
| Y Axis Travel | 2,600 mm (102.4 in) |
| Z Axis Travel Box Way | 800 / 1,020 mm (31.5 / 40.2 in) (Opt.) |
| Z Axis Travel Linear Way | 800 / 1,000 mm (31.5 / 39.4 in) (Opt.) |
| Table Size | 4,300×2,100 mm (169.3×82.7 in) |
| Max Table Load | 16,000 kg (35,273 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp) (22/26 kW (29.5/34.9 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 6,000/4,000 rpm(Opt.) |
| Spindle Speed Linear Way Direct Driven | 10,000 rpm(Opt.)/ 12,000 rpm(Opt.) |
| Spindle Speed Linear Way Built in | 10,000 rpm(Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xyz | XY：20 m/min / Z：15 m/min |
| Tool Capacity Floor Standing Vertical Tool Change | 32/40 pcs(Opt.) |
| Tool Capacity Floor Standing Vertical Horizontal Tool Change | 32 pcs(Opt.)/40 pcs(Opt.)/60 pcs(Opt.) |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Wide range of head, spindle and tool changer configurations
- 16,000 kg (35,273 lb) table load
- 4,100 mm (161.4 in) by 2,600 mm (102.4 in) of X and Y travel
- Floor-standing changers, vertical or vertical-horizontal
Limitations
- Most of the listed capability is optional equipment
- Printed Y travel matches the SF-4126, not the model number
- Base Z travel is 800 mm on either head
Best For
Frequently Asked Questions
01
Standard items include a 6,000rpm 2-step gear type spindle, the FANUC 0iMF PLUS controller and a 32 tools magazine. Options include the 4,000rpm gear spindle, belt-driven and direct-driven spindles, longer Z travel, larger magazines and coolant through spindle system 20/70 bar.
02
03
4,100 mm (161.4 in) in X and 2,600 mm (102.4 in) in Y. Z is 800 / 1,020 mm (31.5 / 40.2 in) (Opt.) on box ways and 800 / 1,000 mm (31.5 / 39.4 in) (Opt.) on linear ways.
04
The motor is rated 18.5/22 kW (24.8/29.5 hp), continuous and short-time. A 22/26 kW (29.5/34.9 hp) motor is listed as an option in the same row.
More from Vision Wide
Other Vertical Machining Centers (VMC)
Pinnacle QV147
Tsugami VA3
AWEA LP-5021
Yasda YMC 650
Hartford HCMC-1100
