Vision Wide SF-2123
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way
max table load
spindle power cont 30 min
How much does the Vision Wide SF-2123 cost?
Price estimate
We do not have a price for the Vision Wide SF-2123 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Vision Wide SF-2123 uses the same 2,000x1,500 mm (78.7x59.1 in) table as the smallest SF but spans it with 2,300 mm (90.6 in) of Y travel and swaps the magazine on the column for a floor-standing tool changer. X travel is 2,100 mm (82.7 in) and the table load is 8,000 kg (17,637 lb).
Two changers are listed. The floor-standing type vertical tool change holds 32 tools, or 40 as an option. The floor-standing type vertical-horizontal tool change is optional in every size: 32, 40 or 60 pcs. Vision Wide does not describe the second one further on the SF page. Its name says it serves the spindle in both orientations, which is what a machine needs if a horizontal head is to change its own tools.
That also explains the cross travel. The SF-2116 has 1,600 mm (63.0 in) of Y over the same table. Here the saddle can run well past the table edge, toward a changer standing on the floor beside the machine and around the sides of the part.
Only the box way head appears in this model's table. The spindle is the 2-step gear type at 6,000 rpm, or 4,000 rpm as an option, with 18.5/22 kW (24.8/29.5 hp). No linear way head or direct-driven spindle is listed for it.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 2,100 mm (82.7 in) |
| Y Axis Travel | 2,300 mm (90.6 in) |
| Z Axis Travel Box Way | 800/1,020 mm (31.5/40.2 in)(Opt.) |
| Table Size | 2,000x1,500 mm (78.7x59.1 in) |
| Max Table Load | 8,000 kg (17,637 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp) (22/26 kW (29.5/34.9 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 6,000/4,000 rpm(Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xyz | X/Y/Z : 24/20/15 m/min |
| Tool Capacity Floor Standing Vertical Tool Change | 32/40 pcs(Opt.) |
| Tool Capacity Floor Standing Vertical Horizontal Tool Change | 32 pcs(Opt.)/40 pcs(Opt.)/60 pcs(Opt.) |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 2,300 mm (90.6 in) of Y travel over a 1,500 mm (59.1 in) wide table
- Floor-standing tool changer, with a vertical-horizontal type of up to 60 pcs as an option
- Box way Z axis with a 2-step gear spindle for heavy cuts
- 8,000 kg (17,637 lb) table load
Limitations
- No linear way head or high-speed spindle in this model's specification table
- The vertical-horizontal tool change is optional in all three sizes
- Y rapid is 20 m/min, below the 24 m/min of the SF-2116
Best For
Frequently Asked Questions
01
Vision Wide lists a floor-standing type vertical tool change with 32/40 pcs(Opt.) and a floor-standing type vertical-horizontal tool change with 32 pcs(Opt.)/40 pcs(Opt.)/60 pcs(Opt.). The second is an option at every capacity.
02
They share the 2,000x1,500 mm (78.7x59.1 in) table and 8,000 kg (17,637 lb) load. The SF-2123 has 2,300 mm (90.6 in) of Y and floor-standing tool changers; the SF-2116 has 1,600 mm (63.0 in) of Y and a vertical type tool change.
03
The table shows only the box way head with a 2-step gear spindle, 6,000/4,000 rpm(Opt.). Spindle power is 18.5/22 kW (24.8/29.5 hp), and a 22/26 kW (29.5/34.9 hp) motor is optional.
04
The row reads X/Y/Z : 24/20/15 m/min. Y is slower than X on this model, and the cutting feed range is 1-10,000 mm/min.
More from Vision Wide
Other Vertical Machining Centers (VMC)
Hardinge XR-1000
Okuma MB-80V
Victor Taichung Vcenter-P106
AWEA LP-3021
Hedelius FORTE 10-4600
