Vision Wide Vertical Machining Centers (VMC)

Vision Wide SF-3123

Q: How much does the Vision Wide SF-3123 cost?

The price estimate for the Vision Wide SF-3123 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/vision-wide-sf-3123#price; the request is passed to Vision Wide or an authorised dealer.

Specs verified 2026-10-04 · visionwide-tech.com Updated 2026-10-04

Image: visionwide-tech.com, Vision Wide

Key Specifications

Table Size

3,000x1,500 mm (118.1x59.1 in)

x axis travel

3,100 mm (122.0 in)

y axis travel

2,300 mm (90.6 in)

z axis travel box way

800/1,020 mm (31.5/40.2 in)(Opt.)

max table load

10,000 kg (22,046 lb)

spindle power cont 30 min

18.5/22 kW (24.8/29.5 hp) (22/26 kW (29.5/34.9 hp) Opt.)

How much does the Vision Wide SF-3123 cost?

Price estimate

Uncertain

We do not have a price for the Vision Wide SF-3123 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

Sixty tools is the largest magazine Vision Wide lists for the SF-3123, and it comes only with the optional vertical-horizontal tool change. The machine has 3,100 mm (122.0 in) of X travel, 2,300 mm (90.6 in) of Y and a 3,000x1,500 mm (118.1x59.1 in) table.

Tool count deserves attention on this version. Five-sided work on a long part uses more tools than top-face work: each face wants its own face mill, drills and taps of the right length, and a horizontal head cannot always reach with the tool the vertical spindle used. The standard floor-standing type vertical tool change gives 32 tools, with 40 as an option. If the job list is long, the 60 tool changer is the one to ask for.

Table load is 10,000 kg (22,046 lb). Rapid traverse is listed as X/Y/Z : 24/20/15 m/min and cutting feed as 1-10,000 mm/min.

The spindle is the box way, 2-step gear type: 6,000 rpm standard, 4,000 rpm optional, on an 18.5/22 kW (24.8/29.5 hp) motor. Compared with the SF-3116, which shares the table, this model gives up the linear way spindle options and gains 2,300 mm of cross travel in place of 1,600 mm (63.0 in).

Full Specifications

Parameter	Value
X Axis Travel	3,100 mm (122.0 in)
Y Axis Travel	2,300 mm (90.6 in)
Z Axis Travel Box Way	800/1,020 mm (31.5/40.2 in)(Opt.)
Table Size	3,000x1,500 mm (118.1x59.1 in)
Max Table Load	10,000 kg (22,046 lb)
Spindle Power Cont 30 Min	18.5/22 kW (24.8/29.5 hp) (22/26 kW (29.5/34.9 hp) Opt.)
Spindle Speed Box Way 2 Step Gear	6,000/4,000 rpm(Opt.)
Cutting Feed Rate	1-10,000 mm/min
Rapid Traverse Xyz	X/Y/Z : 24/20/15 m/min
Tool Capacity Floor Standing Vertical Tool Change	32/40 pcs(Opt.)
Tool Capacity Floor Standing Vertical Horizontal Tool Change	32 pcs(Opt.)/40 pcs(Opt.)/60 pcs(Opt.)

Specifications sourced from visionwide-tech.com — verified 2026-10-04

Strengths & Limitations

Strengths

Up to 60 pcs with the optional vertical-horizontal tool change
3,000x1,500 mm (118.1x59.1 in) table for 10,000 kg (22,046 lb)
2,300 mm (90.6 in) of Y travel for access beside the part
X rapid of 24 m/min on 3,100 mm (122.0 in) of travel

Limitations

The standard changer holds 32 tools
No direct-driven or built-in spindle is listed for this model
Table width stays at 1,500 mm (59.1 in) despite the long Y travel

Best For

Long parts machined on five sides with many tools Machine beds and slide bodies up to 10,000 kg (22,046 lb) Geared-spindle roughing in iron and steel

Frequently Asked Questions

01 How many tools can the Vision Wide SF-3123 hold?

The floor-standing type vertical tool change is listed at 32/40 pcs(Opt.). The floor-standing type vertical-horizontal tool change is listed at 32 pcs(Opt.)/40 pcs(Opt.)/60 pcs(Opt.), so 60 is the maximum and it is an option.

02 What are the SF-3123 travels and table size?

X travel is 3,100 mm (122.0 in) and Y travel 2,300 mm (90.6 in). Z on the box way head is 800 mm, or 1,020 mm as an option. The table measures 3,000x1,500 mm (118.1x59.1 in).

03 How does the SF-3123 compare with the SF-3116?

Both use a 3,000x1,500 mm (118.1x59.1 in) table rated for 10,000 kg (22,046 lb). The SF-3116 has 1,600 mm (63.0 in) of Y and a vertical type tool change; the SF-3123 has 2,300 mm (90.6 in) of Y and floor-standing changers.

04 What spindle speed does the SF-3123 offer?

6,000 rpm with the standard 2-step gear spindle, or 4,000 rpm with the optional low-speed gear spindle. Spindle power is 18.5/22 kW (24.8/29.5 hp).