Vision Wide SF-3122
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way
z axis travel linear way
max table load
How much does the Vision Wide SF-3122 cost?
Price estimate
We do not have a price for the Vision Wide SF-3122 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The heavier frame of the SF series starts with the Vision Wide SF-3122. Its table is rated for 14,000 kg (30,864 lb), where the SF-3120 with the same X travel carries 10,000 kg (22,046 lb).
The table itself is bigger than the travels suggest. It measures 3,300×2,100 mm (129.9×82.7 in), while X travel is 3,100 mm (122.0 in). In other words the table is longer than the stroke, and a part that uses the full length cannot be reached at both ends without planning the setup. Across the machine it is the other way round: 2,200 mm (86.6 in) of Y covers the table width with a margin.
Speed is traded for mass. X and Y rapids are 20 m/min on this frame and Z is 15 m/min. The lighter SF-3120 lists 24 m/min in X and Y, but it does so with a table that weighs and carries less.
The spindle side is common across the SF range: 18.5/22 kW (24.8/29.5 hp), a 6,000 rpm 2-step gear spindle as standard, and direct-driven or built-in units as options. Tool capacity is 32/40 pcs(Opt.) with a vertical type tool change.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 3,100 mm (122.0 in) |
| Y Axis Travel | 2,200 mm (86.6 in) |
| Z Axis Travel Box Way | 800 / 1,020 mm (31.5 / 40.2 in) (Opt.) |
| Z Axis Travel Linear Way | 800 / 1,000 mm (31.5 / 39.4 in) (Opt.) |
| Table Size | 3,300×2,100 mm (129.9×82.7 in) |
| Max Table Load | 14,000 kg (30,864 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp) (22/26 kW (29.5/34.9 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 6,000/4,000 rpm(Opt.) |
| Spindle Speed Linear Way Direct Driven | 10,000 rpm(Opt.)/ 12,000 rpm(Opt.) |
| Spindle Speed Linear Way Built in | 10,000 rpm(Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xyz | XY：20 m/min / Z：15 m/min |
| Tool Capacity Vertical Tool Change | 32/40 pcs(Opt.) |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 14,000 kg (30,864 lb) table load on 3,100 mm (122.0 in) of X travel
- 3,300×2,100 mm (129.9×82.7 in) table
- Y travel of 2,200 mm (86.6 in) clears the table width
- Cutting feed up to 10,000 mm/min
Limitations
- X travel is shorter than the table length
- X and Y rapids are 20 m/min
- Spindle power of 18.5/22 kW (24.8/29.5 hp) is the same as on the smallest SF, despite the heavier table
Best For
Frequently Asked Questions
01
The maximum table load is 14,000 kg (30,864 lb) on a 3,300×2,100 mm (129.9×82.7 in) table. That is the lowest rating of the three machines with 2,200 mm (86.6 in) of Y travel; the SF-5122 reaches 18,000 kg (39,683 lb).
02
Yes. The table is 3,300×2,100 mm (129.9×82.7 in) and X travel is 3,100 mm (122.0 in). Y travel of 2,200 mm (86.6 in) is longer than the table is wide.
03
20 m/min in X and Y and 15 m/min in Z, according to the specification table. The cutting feed range is 1-10,000 mm/min.
04
The table lists direct-driven spindles at 10,000 rpm and 12,000 rpm and a built-in spindle at 10,000 rpm, all optional and all on the linear way head. The standard spindle is the 6,000 rpm 2-step gear type.
More from Vision Wide
Other Vertical Machining Centers (VMC)
Pinnacle LV117
Okuma MF-46V
Hedelius FORTE 65 Single 1320 EL
HNK HPM-20H (20x40)
Colchester Storm VH-1000
