Vision Wide Vertical Machining Centers (VMC)

Vision Wide MN-8026 / MN-8033

Q: How much does the Vision Wide MN-8026 / MN-8033 cost?

The price estimate for the Vision Wide MN-8026 / MN-8033 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/vision-wide-mn-8026-mn-8033#price; the request is passed to Vision Wide or an authorised dealer.

Specs verified 2026-10-04 · visionwide-tech.com Updated 2026-10-04

Image: visionwide-tech.com, Vision Wide

Key Specifications

Table Size

8,000×2,450 mm (315.0×96.5 in)

x axis travel

8,100 mm (318.9 in)

y axis travel

2,600/ 3,300 mm (102.4/ 129.9 in)

z axis travel box way single ballscrew

920 / 1,020 mm (36.2 / 40.2 in)(Opt.)

z axis travel linear way enclosed box ram dual ballscrews

1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.)

max table load

24,000 kg (52,910 lb)

How much does the Vision Wide MN-8026 / MN-8033 cost?

Price estimate

Uncertain

We do not have a price for the Vision Wide MN-8026 / MN-8033 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

Eight metres of table makes a lot of chips, and the Vision Wide MN-8026 / MN-8033 is equipped for them as standard. A screw type chip conveyor runs along each side of the table and feeds a caterpillar type chip conveyor with water tank. A cutting fluid cooling system and a spindle cooling system are standard as well.

What reaches the cut is a matter of options. A spindle ring cutting coolant device is listed for machines with no head attachment. Coolant through spindle at 20/70 bar, its interface, and a coolant through tool holder interface cover through-tool delivery. An oil mist cooling device is the alternative for heavy milling in steel, where many shops prefer little or no flood coolant.

On a five-face milling machine the tool holder interface is the item to look at. When the cut is being made by an attachment head, the spindle ring is behind the head and of no use, and fluid has to arrive through the holder or as mist.

The table measures 8,000×2,450 mm (315.0×96.5 in) and carries 24,000 kg (52,910 lb). X travel is 8,100 mm (318.9 in). Y is 2,600 mm (102.4 in) on the MN-8026 and 3,300 mm (129.9 in) on the MN-8033. Cutting feed is 1-7,000 mm/min and X/Y rapid 8 m/min.

Full Specifications

Parameter	Value
X Axis Travel	8,100 mm (318.9 in)
Y Axis Travel	2,600/ 3,300 mm (102.4/ 129.9 in)
Z Axis Travel Box Way Single Ballscrew	920 / 1,020 mm (36.2 / 40.2 in)(Opt.)
Z Axis Travel Linear Way Enclosed Box Ram Dual Ballscrews	1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.)
Table Size	8,000×2,450 mm (315.0×96.5 in)
Max Table Load	24,000 kg (52,910 lb)
Spindle Power Cont 30 Min	18.5/22 kW (24.8/29.5 hp)(22/26 kW (29.5/34.9 hp) Opt.)(30/37 kW (40.2/49.6 hp) Opt.)
Spindle Speed Box Way 2 Step Gear	4,000 / 6,000 rpm(Opt.)
Spindle Speed Linear Way Enclosed Box Ram 2 Step Gear	4,000 / 6,000 rpm(Opt.)
Spindle Speed Linear Way Enclosed Box Ram Direct Driven	10,000 rpm(Opt.)
Cutting Feed Rate	1-7,000 mm/min
Rapid Traverse Xy	8 m/min
Rapid Traverse Z Box Way or Linear Way	15 m/min
Rapid Traverse Z Enclosed Box Ram	12 m/min

Specifications sourced from visionwide-tech.com — verified 2026-10-04

Strengths & Limitations

Strengths

Table-side screw conveyors and caterpillar type chip conveyor are standard
Coolant through tool holder interface available for head attachment work
8,000×2,450 mm (315.0×96.5 in) table for 24,000 kg (52,910 lb)
Cutting fluid cooling and spindle cooling systems are standard

Limitations

Through-spindle coolant, holder interface and oil mist are all options
Spindle ring coolant only works with no head attachment
Cutting feed of 1-7,000 mm/min and X/Y rapid of 8 m/min

Best For

Long roughing cycles producing heavy chip loads Side-face milling with coolant through the tool holder Frames and beds up to 24,000 kg (52,910 lb)

Frequently Asked Questions

01 How are chips removed on the Vision Wide MN-8026?

By a screw type chip conveyor on the table sides and a caterpillar type chip conveyor with water tank, both on the standard accessory list.

02 What coolant options does the MN-8026 / MN-8033 have?

Spindle ring cutting coolant device (for no head attachment), coolant through spindle system 20/70 bar, the interface of coolant through spindle, coolant through tool holder interface and an oil mist cooling device.

03 What are the MN-8026 table and travels?

Table 8,000×2,450 mm (315.0×96.5 in), load 24,000 kg (52,910 lb). X travel 8,100 mm (318.9 in); Y travel 2,600/ 3,300 mm (102.4/ 129.9 in).

04 How fast is the MN-8026 / MN-8033?

X/Y rapid is 8 m/min and cutting feed 1-7,000 mm/min. Z rapid is 15 m/min on the box way or linear way head, 12 m/min on the enclosed box ram.