Vision Wide Vertical Machining Centers (VMC)

Vision Wide NF-6026 / NF-6033

Q: How much does the Vision Wide NF-6026 / NF-6033 cost?

The price estimate for the Vision Wide NF-6026 / NF-6033 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/vision-wide-nf-6026-nf-6033#price; the request is passed to Vision Wide or an authorised dealer.

Specs verified 2026-10-04 · visionwide-tech.com Updated 2026-10-04

Image: visionwide-tech.com, Vision Wide

Key Specifications

Table Size

6,000×2,450 mm (236.2×96.5 in)

x axis travel

6,100 mm (240.2 in)

y axis travel

2,600/ 3,300 mm (102.4/ 129.9 in)

z axis travel box way single ballscrew

920 / 1,020 mm (36.2 / 40.2 in)(Opt.)

z axis travel linear way enclosed box ram dual ballscrews

1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.)

max table load

22,000 kg (48,501 lb)

How much does the Vision Wide NF-6026 / NF-6033 cost?

Price estimate

Uncertain

We do not have a price for the Vision Wide NF-6026 / NF-6033 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

Six metres long and nearly two and a half wide, the table of the Vision Wide NF-6026 / NF-6033 measures 6,000×2,450 mm (236.2×96.5 in) and takes 22,000 kg (48,501 lb). X travel is 6,100 mm (240.2 in).

Vision Wide gives a design reason for the NF's cutting ability: a cross-section square beam that brings the centroid of the head close to the beam centre. On a bridge machine the head hangs off the front of the beam, and the further out it hangs the more the beam twists under a heavy cut. Keeping the head's mass near the beam centre reduces that twist. The benefit shows most on the wide models, where the beam is long. Here it spans 2,600 mm (102.4 in) of Y travel on the NF-6026 and 3,300 mm (129.9 in) on the NF-6033.

The Z axis is described as a box way design on the standard head, with linear guideways on the other axes. Z travel is 920 mm, optionally 1,020 mm.

Spindle speed is 4,000 rpm as standard and 6,000 rpm as an option, both through a 2-step gearbox. X/Y rapid traverse is 10 m/min; Z is 15 m/min on the standard head. Cutting feed is 1-10,000 mm/min.

Full Specifications

Parameter	Value
X Axis Travel	6,100 mm (240.2 in)
Y Axis Travel	2,600/ 3,300 mm (102.4/ 129.9 in)
Z Axis Travel Box Way Single Ballscrew	920 / 1,020 mm (36.2 / 40.2 in)(Opt.)
Z Axis Travel Linear Way Enclosed Box Ram Dual Ballscrews	1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.)
Table Size	6,000×2,450 mm (236.2×96.5 in)
Max Table Load	22,000 kg (48,501 lb)
Spindle Power Cont 30 Min	18.5/22 kW (24.8/29.5 hp)(22/26 kW (29.5/34.9 hp) Opt.)(30/37 kW (40.2/49.6 hp) Opt.)
Spindle Speed Box Way 2 Step Gear	4,000 / 6,000 rpm(Opt.)
Spindle Speed Linear Way Enclosed Box Ram 2 Step Gear	4,000 / 6,000 rpm(Opt.)
Spindle Speed Linear Way Enclosed Box Ram Direct Driven	10,000 rpm(Opt.)
Cutting Feed Rate	1-10,000 mm/min
Rapid Traverse Xy	10 m/min
Rapid Traverse Z Box Way or Linear Way	15 m/min
Rapid Traverse Z Enclosed Box Ram	12 m/min
Tool Capacity Vertical Tool Change	32 / 40 pcs (Opt.) / 60 pcs (Opt.)
Tool Capacity Floor Standing Vertical Tool Change	32 pcs(Opt.) / 40 pcs (Opt.) / 60 pcs (Opt.)
Tool Capacity Floor Standing Vertical Horizontal Tool Change	32 pcs(Opt.) / 40 pcs (Opt.) / 60 pcs (Opt.)

Specifications sourced from visionwide-tech.com — verified 2026-10-04

Strengths & Limitations

Strengths

6,000×2,450 mm (236.2×96.5 in) table for 22,000 kg (48,501 lb)
Square cross-section beam with the head centroid close to the beam centre, per the maker
Linear guideways with a box way Z axis
Y travel of 2,600 mm (102.4 in) or 3,300 mm (129.9 in)

Limitations

X/Y rapid of 10 m/min makes positioning slow
Z travel of 920 mm on the standard head
Top speed of 6,000 rpm with the gear spindles

Best For

Heavy cutting across wide parts Large die sets and machine frames up to 22,000 kg (48,501 lb) Five-face machining on a six-metre table

Frequently Asked Questions

01 What does Vision Wide say about the NF-6026 beam?

The NF feature text says a cross-section square beam enabled the centroid of the head close to the beam center to ensure heavy cutting ability. It also describes a high rigidity box base under the table.

02 What are the travels of the NF-6026 / NF-6033?

X is 6,100 mm (240.2 in). Y is 2,600/ 3,300 mm (102.4/ 129.9 in), for the NF-6026 and NF-6033 respectively. Z is 920 mm on the standard box way head, or 1,020 mm as an option.

03 How much can the NF-6026 table carry?

22,000 kg (48,501 lb). The table is 6,000×2,450 mm (236.2×96.5 in). The five-metre NF-5026 carries 20,000 kg (44,092 lb).

04 What spindle speeds does the NF-6026 offer?

4,000 rpm standard and 6,000 rpm optional with 2-step gear spindles. A direct-driven spindle at 10,000 rpm is optional and is listed under the linear way and enclosed box ram heads.