Vision Wide Vertical Machining Centers (VMC)

Vision Wide NF-3032 / NF-3039

Q: How much does the Vision Wide NF-3032 / NF-3039 cost?

The price estimate for the Vision Wide NF-3032 / NF-3039 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/vision-wide-nf-3032-nf-3039#price; the request is passed to Vision Wide or an authorised dealer.

Specs verified 2026-10-04 · visionwide-tech.com Updated 2026-10-04

Image: visionwide-tech.com, Vision Wide

Key Specifications

Table Size

3,000×2,450 mm (118.1×96.5 in)

x axis travel

3,100 mm (122.0 in)

y axis travel

3,200/ 3,900 mm (126.0/ 153.5 in)

z axis travel box way single ballscrew

920 / 1,020 mm (36.2 / 40.2 in)(Opt.)

z axis travel linear way enclosed box ram dual ballscrews

1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.)

max table load

13,000 kg (28,660 lb)

How much does the Vision Wide NF-3032 / NF-3039 cost?

Price estimate

Uncertain

We do not have a price for the Vision Wide NF-3032 / NF-3039 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

Cross travel exceeds table travel on the Vision Wide NF-3032 / NF-3039. X is 3,100 mm (122.0 in), while Y is 3,200 mm (126.0 in) on the NF-3032 and 3,900 mm (153.5 in) on the NF-3039.

The table does not grow to match. It is 3,000×2,450 mm (118.1×96.5 in), the same as on the NF-3026, and it carries the same 13,000 kg (28,660 lb). All of the added Y is travel beyond the table edges. On the NF-3039 the spindle can run well clear of the table on each side, which is the room a 90º head or universal head needs to come down beside a part that covers the full table width and machine its side faces from top to bottom.

A short bed with a long beam also suits workpieces that are wider than the table and overhang it, as long as their weight stays within the rating and they are supported.

Both models have a Y axis over 3 m, so the maker's standard ballscrew support device applies to Y. X/Y rapid is 24 m/min. The box way head with a 4,000 rpm 2-step gear spindle is standard, with 920 mm of Z travel; spindle power is 18.5/22 kW (24.8/29.5 hp).

Full Specifications

Parameter	Value
X Axis Travel	3,100 mm (122.0 in)
Y Axis Travel	3,200/ 3,900 mm (126.0/ 153.5 in)
Z Axis Travel Box Way Single Ballscrew	920 / 1,020 mm (36.2 / 40.2 in)(Opt.)
Z Axis Travel Linear Way Enclosed Box Ram Dual Ballscrews	1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.)
Table Size	3,000×2,450 mm (118.1×96.5 in)
Max Table Load	13,000 kg (28,660 lb)
Spindle Power Cont 30 Min	18.5/22 kW (24.8/29.5 hp)(22/26 kW (29.5/34.9 hp) Opt.)(30/37 kW (40.2/49.6 hp) Opt.)
Spindle Speed Box Way 2 Step Gear	4,000 / 6,000 rpm(Opt.)
Spindle Speed Linear Way Enclosed Box Ram 2 Step Gear	4,000 / 6,000 rpm(Opt.)
Spindle Speed Linear Way Enclosed Box Ram Direct Driven	10,000 rpm(Opt.)
Cutting Feed Rate	1-10,000 mm/min
Rapid Traverse Xy	24 m/min
Rapid Traverse Z Box Way or Linear Way	15 m/min
Rapid Traverse Z Enclosed Box Ram	12 m/min
Tool Capacity Vertical Tool Change	32 / 40 pcs (Opt.) / 60 pcs (Opt.)
Tool Capacity Floor Standing Vertical Tool Change	32 pcs(Opt.) / 40 pcs (Opt.) / 60 pcs (Opt.)
Tool Capacity Floor Standing Vertical Horizontal Tool Change	32 pcs(Opt.) / 40 pcs (Opt.) / 60 pcs (Opt.)

Specifications sourced from visionwide-tech.com — verified 2026-10-04

Strengths & Limitations

Strengths

Y travel of 3,200 mm (126.0 in) or 3,900 mm (153.5 in) on a 3,100 mm (122.0 in) bed
Generous spindle travel beyond a 2,450 mm (96.5 in) wide table
X/Y rapid of 24 m/min despite the long beam
Ballscrew support device standard on a Y axis of 3 m or more

Limitations

Table size and 13,000 kg (28,660 lb) load are no greater than on the NF-3026
Much of the Y travel lies outside the table
Z travel is 920 mm on the standard head

Best For

Full-height side machining of parts as wide as the table Wide parts that overhang the table, within 13,000 kg (28,660 lb) Short, wide housings machined on five faces

Frequently Asked Questions

01 Why is the Y travel of the Vision Wide NF-3032 longer than its X travel?

The table gives 3,100 mm (122.0 in) of X and 3,200/ 3,900 mm (126.0/ 153.5 in) of Y for the NF-3032 and NF-3039. The table is 2,450 mm (96.5 in) wide, so the extra Y is room beside the part for attachment heads.

02 Is the NF-3032 table bigger than the NF-3026 table?

No. Both are 3,000×2,450 mm (118.1×96.5 in) and both carry 13,000 kg (28,660 lb). The NF-3026 has 2,600 mm (102.4 in) of Y travel where the NF-3032 has 3,200 mm (126.0 in).

03 What is the difference between the NF-3032 and NF-3039?

Y travel. The NF-3032 has 3,200 mm (126.0 in) and the NF-3039 has 3,900 mm (153.5 in). They share one column of the specification table and every other row.

04 What is the standard spindle on the NF-3032 / NF-3039?

A box way 4,000rpm 2-step gear type spindle with 18.5/22 kW (24.8/29.5 hp). The 6,000 rpm gear spindle and the 10,000 rpm direct-driven spindle are options.