Vision Wide MN-6023 / MN-6030
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way single ballscrew
z axis travel linear way enclosed box ram dual ballscrews
max table load
How much does the Vision Wide MN-6023 / MN-6030 cost?
Price estimate
We do not have a price for the Vision Wide MN-6023 / MN-6030 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Vision Wide says the roller way structure of the MN series speeds up three-axis rapid traverse and raises the machine's efficiency of utilization. On the Vision Wide MN-6023 / MN-6030 that claim can be set beside the table, and the two should be read together.
The X/Y rapid listed for this six-metre model is 10 m/min, and Z is 15 m/min on the standard head. Those are the same figures the NF-6023 table gives for the linear-guide machining center of the same size. So whatever the roller ways contribute, it does not appear as a higher number in the rapid traverse row. A buyer comparing the two should ask the maker for acceleration figures, since that is where a guideway change would show, and the page has none.
What the table does establish is capacity. X travel is 6,100 mm (240.2 in). The table is 6,000×2,050 mm (236.2×80.7 in) and carries 22,000 kg (48,501 lb). Y is 2,300 mm on the MN-6023 and 3,000 mm on the MN-6030.
Cutting feed is 1-10,000 mm/min. The standard spindle is a box way 4,000rpm 2-step gear type with 18.5/22 kW (24.8/29.5 hp), and a FANUC 0iMF PLUS runs the machine.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 6,100 mm (240.2 in) |
| Y Axis Travel | 2,300/ 3,000 mm (90.6/ 118.1 in) |
| Z Axis Travel Box Way Single Ballscrew | 920 / 1,020 mm (36.2 / 40.2 in)(Opt.) |
| Z Axis Travel Linear Way Enclosed Box Ram Dual Ballscrews | 1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.) |
| Table Size | 6,000×2,050 mm (236.2×80.7 in) |
| Max Table Load | 22,000 kg (48,501 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp)(22/26 kW (29.5/34.9 hp) Opt.)(30/37 kW (40.2/49.6 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram Direct Driven | 10,000 rpm(Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xy | 10 m/min |
| Rapid Traverse Z Box Way or Linear Way | 15 m/min |
| Rapid Traverse Z Enclosed Box Ram | 12 m/min |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 6,000×2,050 mm (236.2×80.7 in) table for 22,000 kg (48,501 lb)
- Roller ways on the X and Y axes
- Z rapid of 15 m/min on the standard head
- Cutting feed up to 10,000 mm/min at six metres
Limitations
- X/Y rapid of 10 m/min, no higher than on the NF-6023
- No acceleration figures to support the rapid traverse claim
- Standard spindle speed is 4,000 rpm
Best For
Frequently Asked Questions
01
Not in the published rapid rates: both list 10 m/min for X/Y and 15 m/min for Z on the standard head. The MN text says its roller ways speed up rapid traverse, but gives no acceleration figure.
02
Table 6,000×2,050 mm (236.2×80.7 in), load 22,000 kg (48,501 lb), X travel 6,100 mm (240.2 in), Y travel 2,300/ 3,000 mm (90.6/ 118.1 in).
03
920 mm on the box way head with single ballscrew, or 1,020 mm as an option. Linear way and enclosed box ram heads on dual ballscrews are listed at 1,000 mm, 1,200 mm and 1,400 mm, all optional.
04
The FANUC 0iMF PLUS controller is on the standard accessory list. The MN lists name no optional control, so ask Vision Wide if another is needed.
More from Vision Wide
Other Vertical Machining Centers (VMC)
Brother SPEEDIO S500X1
Fryer MB-10Q
Doosan DNM 6700 Plus
Kent CNC KVR-4020A
