Vision Wide MN-5023 / MN-5030
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way single ballscrew
z axis travel linear way enclosed box ram dual ballscrews
max table load
How much does the Vision Wide MN-5023 / MN-5030 cost?
Price estimate
We do not have a price for the Vision Wide MN-5023 / MN-5030 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The beam is the part of the Vision Wide MN-5023 / MN-5030 that the maker singles out: a solid beam with a big cross-section and roller ways, which it says strengthens the stiffness of the Y-travel.
On a five-face machine the beam is loaded in more ways than on a plain vertical one. With an angle head fitted, the cut pushes sideways and along the beam as well as upward, and the head hangs lower and further out. A beam that resists only bending would twist. A large solid section resists both, and the roller ways along it give the saddle a stiff seat wherever it stands on the Y stroke. That stroke is 2,300 mm (90.6 in) on the MN-5023 and 3,000 mm (118.1 in) on the MN-5030.
Under the beam is a 5,000×2,050 mm (196.9×80.7 in) table that takes 20,000 kg (44,092 lb). X travel is 5,100 mm (200.8 in).
Speed drops with length, as on every machine of this kind. X/Y rapid is 12.5 m/min here. Cutting feed is still 1-10,000 mm/min.
Three motor ratings are listed: 18.5/22 kW (24.8/29.5 hp) as standard, 22/26 kW (29.5/34.9 hp) and 30/37 kW (40.2/49.6 hp) as options. For side milling with a long head the largest is worth considering.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 5,100 mm (200.8 in) |
| Y Axis Travel | 2,300/ 3,000 mm (90.6/ 118.1 in) |
| Z Axis Travel Box Way Single Ballscrew | 920 / 1,020 mm (36.2 / 40.2 in)(Opt.) |
| Z Axis Travel Linear Way Enclosed Box Ram Dual Ballscrews | 1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.) |
| Table Size | 5,000×2,050 mm (196.9×80.7 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp)(22/26 kW (29.5/34.9 hp) Opt.)(30/37 kW (40.2/49.6 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram Direct Driven | 10,000 rpm(Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xy | 12.5 m/min |
| Rapid Traverse Z Box Way or Linear Way | 15 m/min |
| Rapid Traverse Z Enclosed Box Ram | 12 m/min |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Solid beam with a big cross-section and roller ways
- 20,000 kg (44,092 lb) on a 5,000×2,050 mm (196.9×80.7 in) table
- Motor options up to 30/37 kW (40.2/49.6 hp)
- Y travel of 2,300 mm (90.6 in) or 3,000 mm (118.1 in)
Limitations
- X/Y rapid of 12.5 m/min at this length
- Standard motor is the smallest of the three listed
- The page gives no beam dimensions or stiffness values
Best For
Frequently Asked Questions
01
That a solid beam with a big cross-section and roller ways design strengthens the stiffness of the Y-travel. No dimensions or stiffness figures are given on the page.
02
X is 5,100 mm (200.8 in). Y is 2,300/ 3,000 mm (90.6/ 118.1 in) for the MN-5023 and MN-5030. Z is 920 mm on the standard box way head, with 1,020 mm optional.
03
18.5/22 kW (24.8/29.5 hp) as standard, with 22/26 kW (29.5/34.9 hp) and 30/37 kW (40.2/49.6 hp) as options. Each pair is the continuous and short-time rating.
04
20,000 kg (44,092 lb), on a 5,000×2,050 mm (196.9×80.7 in) table. The MN-4023 carries 16,000 kg (35,273 lb) and the MN-6023 carries 22,000 kg (48,501 lb).
More from Vision Wide
Other Vertical Machining Centers (VMC)
Brother SPEEDIO R650X1
YCM SV108A
YCM NSV66A
Kent CNC KTM-3VKF
Feeler VMX-1650
