TRUMPF TruPunch 1000 CNC Turret Punch Press

Est. $120,000 – $200,000 Updated 2026-10-03

Key Specifications

punching force

200 kN (22 tons)

sheet size capacity

1,250 x 2,500 mm (49 x 98 in)

number of tool stations

16 stations (multitool capable)

repositioning speed

Up to 80 m/min

punching speed

Up to 600 strokes/min

control system

TRUMPF TruControl CNC

How much does the TRUMPF TruPunch 1000 CNC Turret Punch Press cost?

Estimated price range

Est.$120,000 – $200,000

Our best estimate for a cnc punch presse in this class — not a quote from TRUMPF. Configuration moves it a long way.

Overview

The TruPunch 1000 appears here as a CNC turret punch press with 200 kN (22 tons) of punching force, a sheet size capacity of 1,250 x 2,500 mm (49 x 98 in) and 16 tool stations that can take multitools. The listed figures put punching speed at up to 600 strokes/min and repositioning speed at up to 80 m/min, under a TRUMPF TruControl CNC.

Throat depth is 1,250 mm, the same as the short side of the sheet, so the whole width of a full sheet sits inside the throat and only the 2,500 mm length has to travel. Sixteen stations is a modest tool set for mixed work. That is where the multitool capability earns its place: a multitool station holds several small punches in one position, which stretches the station count for small holes while the larger shapes keep stations of their own.

Machine weight is approx. 4,500 kg (9,920 lb), the number to hand to whoever checks the floor and plans the lift. The TruPunch 5000 is the larger frame, listed with 3,050 mm (120 in) of X travel and 1,550 mm (61.0 in) of Y.

Full Specifications

Parameter	Value
Punching Force	200 kN (22 tons)
Sheet Size Capacity	1,250 x 2,500 mm (49 x 98 in)
Number of Tool Stations	16 stations (multitool capable)
Repositioning Speed	Up to 80 m/min
Punching Speed	Up to 600 strokes/min
Control System	TRUMPF TruControl CNC
Throat Depth	1,250 mm
Machine Weight	Approx. 4,500 kg (9,920 lb)

Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.

Strengths & Limitations

Strengths

200 kN (22 tons) of punching force
Takes 1,250 x 2,500 mm (49 x 98 in) sheets, with a 1,250 mm throat depth matching the sheet width
16 tool stations, multitool capable
Repositioning speed up to 80 m/min

Limitations

16 stations restricts how many punch shapes stay loaded unless multitools are used
Punching speed is listed at up to 600 strokes/min
No maximum sheet thickness appears in the listed figures, so it has to be confirmed for each material

Best For

Sheets up to 1,250 x 2,500 mm (49 x 98 in) Jobs whose punch set fits 16 stations, with multitools for small holes Punching work within 200 kN (22 tons) of force

Frequently Asked Questions

01 What sheet size does the TruPunch 1000 take?

The listed sheet size capacity is 1,250 x 2,500 mm (49 x 98 in). Throat depth is 1,250 mm, equal to the short side, so a full sheet does not have to be turned to reach its far edge.

02 How many tools does the TruPunch 1000 hold?

The listed figure is 16 tool stations, described as multitool capable. A multitool puts several small punches in one station, so the number of punches available can be higher than 16 when small shapes are grouped that way.

03 What control does the TruPunch 1000 run?

The control system is listed as TRUMPF TruControl CNC. The same listing gives a punching speed of up to 600 strokes/min and a repositioning speed of up to 80 m/min.