TRUMPF TruMatic 2000R
Key Specifications
sheet capacity
punching force
turret stations
punch drive
laser type
laser power
How much does the TRUMPF TruMatic 2000R cost?
Estimated price range
Our best estimate for a cnc punch presse in this class — not a quote from TRUMPF. Configuration moves it a long way.
Overview
The TruMatic 2000R is listed as a punch-laser combination machine: a hydraulic punch drive with 180 kN (18 tons) of punching force and up to 20 stations on a rotating punch head, combined with a laser that is CO2 or fiber depending on the model variant. The listed laser power is 2.2 to 3.2 kW for the CO2 version and 2 to 3 kW for the fiber version.
On the punching side, the listed figures give approximately 400 hpm in punch mode and a positioning speed of 80 m/min in X and Y. A combination machine like this earns its place on parts that mix punched and formed features with free contours, because the sheet stays clamped while both processes run.
The variant matters more than anything else on this page. Whether the machine in front of you has the CO2 or the fiber source decides what it will cut and how thick, and the listed thickness and sheet-width rows are not consistent with each other. The only safe figures are the common ones: sheet length is 2,500 mm and the thinnest sheet is 0.5 mm. Take the rest from the machine's own documentation.
For installation, the listed machine weight is 12,000 kg (26,455 lb) and the electrical supply is 400 VAC 3-phase 50 Hz, so a site on a different supply will need a transformer. Programming is described as TRUMPF TruTops Punch/Laser combination programming.
Full Specifications
| Parameter | Value |
|---|---|
| Sheet Capacity | 1,500 x 2,500 mm (59 x 98 in) |
| Punching Force | 180 kN (18 tons) |
| Turret Stations | 20 stations |
| Punch Drive | Hydraulic (standard model) |
| Laser Type | CO2 or fiber laser (model variant dependent) |
| Laser Power | 2.2-3.2 kW CO2 or 2-3 kW fiber |
| Sheet Thickness Mild Steel Punch | 0.5-6.0 mm |
| Sheet Thickness Mild Steel Laser | 0.5-12 mm (CO2) or 0.5-20 mm (fiber) |
| CNC Control | TRUMPF TruTops Punch/Laser combination programming |
| Machine Weight | 12,000 kg (26,455 lb) |
| Electrical | 400 VAC 3-phase 50 Hz |
| Sheet Thickness Max | 6.4 mm mild steel punch; 6 mm mild steel laser cut |
| Sheet Size Max | 1,250 x 2,500 mm |
| Number of Tools | Up to 20 stations (mixed, with rotating punch head) |
| Hits per Minute Max | Approx. 400 hpm (punch mode) |
| Positioning Speed | 80 m/min (X and Y) |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- Punching and laser cutting in one clamping, with 180 kN (18 tons) of punching force
- Up to 20 stations with a rotating punch head
- Positioning speed of 80 m/min in X and Y, and approximately 400 hpm in punch mode
- Listed with a CO2 laser of 2.2 to 3.2 kW or a fiber laser of 2 to 3 kW, depending on variant
Limitations
- The laser type and power depend on the variant, so capacity cannot be judged from the model name alone
- The listed rows disagree on sheet width and on maximum thickness, which have to be confirmed on the actual machine
- Listed electrical supply is 400 VAC 3-phase 50 Hz, which other mains supplies do not match
- At 12,000 kg (26,455 lb) the machine needs a floor and rigging plan
Best For
Frequently Asked Questions
01
The listed figures show two variants: a CO2 laser with 2.2 to 3.2 kW, or a fiber laser with 2 to 3 kW. Which one a given machine has depends on the model variant, so check the laser source and its rated power on the machine itself.
02
Punching force is listed at 180 kN (18 tons), with a hydraulic punch drive on the standard model. There are up to 20 stations with a rotating punch head, and the listed stroke rate is approximately 400 hpm in punch mode.
03
The listed figures agree on a sheet length of 2,500 mm and a minimum thickness of 0.5 mm. They do not agree on the sheet width or on the maximum thickness for punching and laser cutting, so confirm those limits from the machine's documentation.
04
The listed machine weight is 12,000 kg (26,455 lb) and the electrical supply is 400 VAC 3-phase 50 Hz. Programming is listed as TRUMPF TruTops Punch/Laser combination programming, so the software side should be checked along with the machine.
Videos
Elite Machinery Inc.
GINDUMAC GmbH
More from TRUMPF
Other CNC Punch Presses
Prima Power Punch Genius 1540
Ermak ETP 1500x2500
Bystronic ByTower
Amada AC 2510 NT
Yawei HPC-2048
