Röders RXU1201DSXH
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
machining range
swivelling range
How much does the Röders RXU1201DSXH cost?
Price estimate
We do not have a price for the Röders RXU1201DSXH that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Röders RXU1201DSXH is the tall version of the RXU1201DSH. Röders states the difference in one line: the Z-axis travel range is increased by 200 mm. The machining range becomes 1,000 mm x 1,050 mm x 800 mm (39.4 x 41.3 x 31.5 in), and the maximum distance between spindle nose and table grows to 980 mm (38.6 in).
Who needs the extra travel? Anyone whose parts stand high on the table. When a tall workpiece is swivelled, its top corner swings out and up, and the spindle has to retract far enough to clear it and still come down to the lowest feature. Deep-drawing dies, tall mould cores and parts on raised pallets are the usual cases.
The price of that travel is height, and it is considerable. The required space is W 4,430 mm x L 5,510 mm, depending on configuration, by H 4,535 mm (178.5 in). Machine weight is about 33.4 t. Crane hook height and the route into the building should be settled before anything else.
In other respects the two machines match. Workpiece weight is 1,500 kg (3,307 lb) on tables of 625 mm or 895 mm; swivelling range is +/-115 degrees with others on request; rotation is almost unlimited. The standard spindle gives 24,000 rpm and 67 Nm (S1) on HSK A63 for tools up to 35 mm. 50 tools are held as standard and 90 or more as an option, and 4 screws in the machining area clear the chips.
Full Specifications
| Parameter | Value |
|---|---|
| Machining Range | 1,000 mm x 1,050 mm x 800 mm (39.4 x 41.3 x 31.5 in) |
| Swivelling Range | +/-115 degrees (others on request) |
| Rotation Range | Almost unlimited |
| Table Size | 625 mm round or 625 mm square, 895 mm round with two flattened sides or 895 mm round |
| Distance Spindle Nose to Table | 980 mm (38.6 in) |
| Max Workpiece Weight | 1,500 kg (3,307 lb) |
| Feed Rate | 0–60,000 mm/min (0–2,362 ipm) |
| Max Spindle Speed | 24,000 rpm (standard spindle; others on request) |
| Spindle Torque | 67 Nm (S1) (49.4 lb-ft) |
| Spindle Taper | HSK A63 |
| Max Tool Diameter (full magazine) | 35 mm (1.4 in) |
| Tool Capacity | 50 places, optional 90 or more places (chain changer – can be loaded during machining) |
| Tool Measurement | Integrated measuring laser |
| Chip Disposal | With 4 screws in the machining area into chip box or chip conveyor behind the machine |
| Machine Weight | ~33.4 t (~73,633 lb) |
| Required Space | W 4,430 mm x L 5,510 mm (depending on configuration) x H 4,535 mm (174.4 x 216.9 x 178.5 in) |
Specifications sourced from roeders.de — verified 2026-10-05
Strengths & Limitations
Strengths
- 800 mm in the third axis of the machining range, 200 mm more Z-axis travel than the RXU1201DSH
- 980 mm (38.6 in) between spindle nose and table
- 1,500 kg (3,307 lb) workpiece weight on a two-side supported C-axis
- 24,000 rpm HSK A63 spindle with 67 Nm (S1); 102 Nm (S1) as the largest option
- 50 or optionally 90 or more tool places
Limitations
- H 4,535 mm (178.5 in) of required height
- About 33.4 t of machine to bring in and set on a foundation
- Tool diameter limited to 35 mm on the standard spindle
- The long Z-axis is only useful for tall parts; for flat dies the RXU1201DSH does the same work at H 4,020 mm
Best For
Frequently Asked Questions
01
The machining range is 1,000 mm x 1,050 mm x 800 mm (39.4 x 41.3 x 31.5 in). Röders states that the Z-axis travel range is increased by 200 mm compared with the RXU1201DSH.
02
The required space is given as W 4,430 mm x L 5,510 mm, depending on configuration, by H 4,535 mm (178.5 in). The RXU1201DSH needs H 4,020 mm, so the ceiling and crane clearance have to be checked for the long-Z version specifically.
03
No. Both versions are listed with a maximum workpiece weight of 1,500 kg (3,307 lb) and the same table choices of 625 mm and 895 mm. Machine weight rises slightly, to about 33.4 t.
04
A 24,000 rpm HSK A63 spindle with 67 Nm (S1) and a maximum tool diameter of 35 mm. Other spindles are on request, and the largest listed has 102 Nm (S1).
More from Röders
Other 5-Axis Machining Centers
DMG Mori HSC 20 linear
Modig IM-8
Vision Wide FA-2623
Kitamura Mytrunnion-4G
Mazak VERSATECH V-100N
