Quaser UX600P
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
max swing
max work piece size
How much does the Quaser UX600P cost?
Price estimate
We do not have a price for the Quaser UX600P that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Quaser UX600P is the higher-specification model on Quaser's double column 5-axis frame. Its table is listed as Ø600 x W500 mm (Ø23.6" x W19.7"), a diameter and a width, which suggests a round table with flats on two sides. It holds work pieces up to Ø600 x 430 mm (Ø23.6" x 16.9") and 300 kg (661 lbs).
Three entries change against the UX600C. The UX600C's 30 tools become 48 as standard here. The spindle is offered as a band, 9K ~ 15K, where the UX600C lists a single 12K. And the swing is Ø600 mm (Ø23.6") in place of the UX600C's Ø630 mm (Ø24.8"). Travels do not change: 885 mm (34.8") in X, 800 mm (31.5") in Y, 500 mm (19.7") in Z.
The larger magazine matters most. A 5-axis job tends to carry roughing tools, long-reach finishers, a probe and spare cutters for tool-life management, and 48 pockets let a family of parts share one loaded magazine. The 15K upper option suits aluminium structural parts; the 9K end points toward steels and titanium.
Quaser's description of the frame is the same for both models. The double column structure is intended to give accuracy, mechanical rigidity and machining stability, with a stable, compression-resistant design behind the spindle torsion, cutting ability and worktable load. Tools are limited to 76.2 mm (3") in diameter, 125 mm (4.9") with neighboring pots empty, and 280 mm (11.0") in length.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size | Ø600 x W500 mm (Ø23.6" x W19.7") |
| Max Swing | Ø600 mm (Ø23.6") |
| Max Work Piece Size | Ø600 x 430 mm (Ø23.6" x 16.9") |
| X Axis Travel | 885 mm (34.8") |
| Y Axis Travel | 800 mm (31.5") |
| Z Axis Travel | 500 mm (19.7") |
| Max Table Load | 300 kg (661 lbs) |
| Spindle Taper | 40 taper |
| Max Spindle Speed | 9K ~ 15K |
| Tool Capacity | 48 (std.) |
| Max Tool Diameter (full magazine) | 76.2 mm (3") |
| Max Tool Diameter Neighbor Pots Empty | 125 mm (4.9") |
| Max Tool Length | 280 mm (11.0") |
Specifications sourced from quaser.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 48 tools as standard on the double column frame
- Spindle band listed as 9K ~ 15K, so speed can be matched to the material
- Table listed as Ø600 x W500 mm (Ø23.6" x W19.7") with a 300 kg (661 lbs) load
- 800 mm (31.5") of Y travel and 885 mm (34.8") of X
- Double column structure built for rigidity and machining stability, per Quaser
Limitations
- Swing is Ø600 mm (Ø23.6"), slightly less than the Ø630 mm (Ø24.8") of the UX600C
- Z travel is only 500 mm (19.7")
- Quaser's page does not explain the P designation or list rotary axis ranges
- Spindle power and torque are not published for either end of the 9K ~ 15K band
Best For
Frequently Asked Questions
01
The UX600P has 48 tools as standard and a spindle listed at 9K ~ 15K; the UX600C has 30 tools and a spindle listed at 12K. The UX600P table is listed as Ø600 x W500 mm (Ø23.6" x W19.7") with a Ø600 mm (Ø23.6") swing, the UX600C table as Ø500 mm (Ø19.7") with a Ø630 mm (Ø24.8") swing. Travels and load are identical.
02
X travel is 885 mm (34.8"), Y travel is 800 mm (31.5") and Z travel is 500 mm (19.7"). The ranges of the rotary axes are not given in Quaser's table.
03
Ø600 x 430 mm (Ø23.6" x 16.9"), with a table load capacity of 300 kg (661 lbs). The maximum swing is Ø600 mm (Ø23.6").
04
48 as standard, on a 40 taper. Each tool can be up to 76.2 mm (3") in diameter, or 125 mm (4.9") if the neighboring pots are empty, and up to 280 mm (11.0") long.
More from Quaser
Other 5-Axis Machining Centers
Hartford Aero-1041G-5X
GF Mikron MILL E 500 U
Matsuura MX-330 PC4
Mazak VC-Ez 26X
